Minerals produced during cooling and hydrothermal alteration of ash flow tuff from Yellowstone drill hole Y-5

A rhyolitic ash-flow tuff in a hydrothermally active area within the Yellowstone caldera was drilled in 1967, and cores were studied to determine the nature and distribution of primary and secondary mineral phases. The rocks have undergone a complex history of crystallization and hydrothermal alteration since their emplacement 600,000 years ago. During cooling from magmatic temperatures, the glassy groundmass underwent either devitrification to alkali feldspar + α-cristobalite ± tridymite or granophyric crystallization to alkali feldspar + quartz. Associated with the zones of granophyric crystallization are prismatic quartz crystals in cavities similar to those termed miarolitic in plutonic rocks. Vapor-phase alkali feldspar, tridymite, magnetite, and sporadic α-cristobalite were deposited in cavities and in void spaces of pumice fragments. Subsequently, some of the vapor-phase alkali feldspar crystals were replaced by microcrystalline quartz, and the vapor-phase minerals were frosted by a coating of saccharoidal quartz.Hydrothermal minerals occur primarily as linings and fillings of cavities and fractures and as altered mafic phenocrysts. Chalcedony is the dominant mineral related to the present hydrothermal regime and occurs as microcrystalline material mixed with various amounts of hematite and goethite. The chalcedony displays intricate layering and was apparently deposited as opal from silica-rich water. Hematite and goethite also replace both mafic phenocrysts and vapor-phase magnetite. Other conspicuous hydrothermal minerals include montmorillonite, pyrite, mordenite, calcite, and fluorite. Clinoptilolite, erionite, illite, kaolinite, and manganese oxides are sporadic. The hydrothermal minerals show little correlation with temperature, but bladed calcite is restricted to a zone of boiling in the tuff and clearly was deposited when CO₂ was lost during boiling.Fractures and breccias filled with chalcedony are common throughout Y-5 and may have been produced by rapid disruption of rock caused by sudden decrease of fluid pressure in fractures, most likely a result of fracturing during resurgent doming in this part of the Yellowstone caldera. The chalcedony probably was deposited as opal or β-cristobalite from a pre-existing silica floc that moved rapidly into the fractures and breccias immediately after the sudden pressure drop.     

梁柱组合节点的拟动力试验研究

本文主要介绍了所开展的梁柱组合节点的拟动力试验,梁柱连接采用高强度螺栓平端板形式。试验采用经过调幅的具有不同地震加速度峰值的Ispara地震动作为激励进行加载,对试件在地震作用下的加速度反应、位移反应、滞回性能、刚度和耗能进行分析,对试验现象和结果进行了比较详细的阐述和分析。     

A note on the deflection of a baroclinic current by a continental shelf

The deflection, at a step-shelf fronted coast, of a constant potential vorticity current in a reduced-gravity, inviscid model ocean is studied theoretically. The step shelf, with a depth smaller than the reservoir depth, forces the uplifting of the approaching current and causes water column foreshortening, leading to relative vorticity generation that enhances current deflection to the right (facing the coast). As a consequence, in comparison to the case of a vertical wall coast, the proportion of the transport to the right is increased. For normal incidence for a shelf-depth/reservoir-depth ratio of 0.3 and shelf width to deformation radius ratio of 1.5, more than 90% of the approaching current transport goes to the right and less than 10% to the left. In addition, the (barotropic) dynamic pressure at the coast is low to the right and high to the left (with the highest pressure at the stagnation point). In the vertical wall case, the wall pressures on the flank are equal. For oblique incidence from the left, the deflection to the left is drastically reduced. In fact, there is practically no steady-state flow diverted to the left (less than 2%) when the approach angle is greater than 60° to the left of normal. In the vertical wall case, the same angle would have to be 90° for the flow to the left to vanish, namely only when the approach current is parallel to the coast to the right.     

A univariate model for long-term streamflow forecasting

This paper, the first in a series of two, employs the principle of maximum entropy (POME) via maximum entropy spectral analysis (MESA) to develop a univariate model for long-term streamflow forecasting. Three cases of streamflow forecasting are investigated: forward forecasting, backward forecasting (or reconstruction) and intermittent forecasting (or filling in missing records). Application of the model is discussed in the second paper.     

Harmonic wave propagation through viscoelastic heterogeneous media exhibiting mild stochasticity - I. Fundamental solutions

This work examines the propagation of time harmonic, horizontally polarized shear waves through a naturally occurring heterogeneous medium that exhibits viscous behaviour as well as random fluctuations of its elastic modulus about a mean value. As a first step, the governing equation, which is a heterogeneous Helmholtz equation, is solved using algebraic transformations and the relevant Green's function is obtained for two sets of boundary conditions, one corresponding to a finite depth layer and the other to an infinite layer. Viscous material behaviour is introduced by considering the depth-dependent elastic modulus to be a complex quantity. Subsequently, material stochasticity in the medium is handled through the perturbation approach by assuming that the elastic modulus has a small random fluctuation about its mean value. The final results are closed-form expressions for the mean value and covariance matrix of both the wave speed profile in the medium and the corresponding Green's function. In Part II, (Soil Dynam. Earth. Engng, 1996,15, 129-39), two examples concerning seismic wave propagation in soft topsoil and in sandstone serve to illustrate the methodology and comparisons are made with Monte Carlo simulations.     

Distribution and source apportionments of polychlorinated biphenyls (PCBs) in mariculture sediments from the Pearl River Delta, South China

Surface and core sediments collected from six mariculture farms in the Pearl River Delta (PRD) were analyzed to evaluate contamination levels of polychlorinated biphenyls (PCBs). The ∑PCBs (37 congeners) concentrations ranged from 5.10 to 11.0 ng g(-1) (mean 7.96 ng g(-1)) in surface and 3.19 to 22.1 ng g(-1) (mean 7.75 ng g(-1)) in core sediments, respectively. The concentrations were significantly higher than that measured in the sediments of their corresponding reference sites, whereby the average enrichment percentages were 62.0% and 42.7% in surface and core sediments, respectively. Significant correlations (R2=0.77, p<0.05) of PCB homologue group proportions between fish feeds and surface mariculture sediments suggested that fish feed input was probably the main source for the enrichment of PCBs. Due to the fact that PCBs could be transferred along food chains, PCB contamination in fish feeds and mariculture sediments should not be overlooked.     

Description and hydraulic interpretation of grain size cumulative curves from the Platte River system

Log-probability plots of grain-size distribution from the Platte, North Platte, and South Platte rivers are composed of four or five straight line segments. The line segments are grouped, dividing each curve into three regions. These regions are interpreted as subpopulations moved by different transport mechanisms. Consideration of the criterion for suspension and calculation of shear velocities associated with dominant discharges support this interpretation. The grain size cumulative curves are similar to each other but distinct from curves of fluvial systems transporting only fine-grained material, the difference being the presence of a subpopulation of grains moved in traction transport. One of two possible relationships seems to exist between the grain-size distributions and flow conditions within the Platte River system. Estimated shear velocities derived by varying flow conditions within reasonable limits predict a range of grain sizes within which the break between the intermittent suspension and traction loads should occur. This break appears to be associated with intermediate shear velocities if truncated normal distributions are assumed; but if overlapping distributions are assumed, the ‘break'is associated with estimated maximum shear velocities.     

Statistical models for the assessment of nitrate contamination in urban groundwater using GIS

The purpose of this study is to develop statistical models for groundwater quality assessment in urban areas using Geographic Information Systems (GIS). To develop the models, the concentrations of nitrate (expressed as nitrogen, NO₃-N), which are different according to the type of land use, well depth and distribution of rainfall, were analyzed in the Seoul (the capital of South Korea) area. Data such as land use, location of wells and groundwater quality data for nitrate contamination were collected and a database constructed within GIS. The distribution of NO₃-N concentrations is not normal, and the results of the Mann-Whitney U-test analysis show the difference of NO₃-N concentration by well depth and by distribution of rainfall. In both the shallow and deep wells, the radius of influence is 200 m in the dry season and 250 m in the rainy season, showing the tendency to increase in the rainy season. The results of correlation and regression analysis indicate that mixed residential and business areas and cropped field areas are likely to be the major contributor of increasing NO₃-N concentration. Land uses are better correlated with NO₃-N in deep wells than in shallow wells.     

A new type of open fracturing in the rocks

The finest open fractures (ultramicrofractures) were found from the study of surface density of open fractures in the rocks from the super-deep Uralian borehole SG-4. The high-resolution method of the registration of open fractures in the rocks is described. The typical structures of systems formed by open fractures are shown and their genesis is proposed.