The acquisition of thermoremanent magnetization by multidomain single-crystal titanomagnetite

Summary. Large, well-characterized single-crystals of titanomagnetite of approximate composition Fe_2.4Ti_0.6O₄ were ground into spheres and orientated along specific crystallographic axes. The field dependences of the thermoremanent magnetization (TRM) and the temperature dependences of the magnetic hysteresis properties were measured and evaluated against the available theoretical models. The models, of necessity simplifications of real materials, were unable to account for many features of the experimental curves. The discrepancies were partly resolved by consideration of the mode of blocking of each individual coercivity fraction. It was deduced that the domain-walls were pinned by both dislocation lines and by inclusions or voids. A fraction of the walls were not thermally blocked. They could however be thought of as being blocked isothermally as the applied field was relaxed. The proportion of remanence blocked in by each process was found to be dependent on the strength of the inducing field through the field dependence of the blocking temperatures. A simplified model, taking these effects into account, was developed. This predicts the main features of the TRM acquisition curve and of the alternating field and thermal demagnetization spectra.     

The October 4, 1994 Shikotan (Kurile Islands) Tsunamigenic Earthquake: An Open Problem on the Source Mechanism

—On October 4, 1994, an earthquake of magnitude M _w = 8.2 occurred in the western part of the Kurile Islands, generating a tsunami that has been well recorded along the entire coast of Japan. Previous works have shown that this earthquake does not represent a low angle thrust event, normally expected in a subduction zone, rather an intra-plate event rupturing through the slab. On the basis of the accepted mechanism, two fault models, representative of the nodal plane ambiguity, have been suggested. The goal of this work is to verify whether the tsunami simulations are able to rule out one of the two proposed fault models. Taking into account both fault models together with a heterogeneous slip along the fault, we have performed numerical simulations of the tsunami. All source models produce tide-gauge records in agreement with the observed ones. The limit of resolution of the performed simulations, estimated by means of a perturbed bathymetry, does not allow us to distinguish the best source model.     

Anomalous increase in the foF2 critical frequency prior to the Spanish earthquake of May 11, 2011

A study of variations in the critical frequency of the F2 layer (foF2) prior to a shallow-focus eartquake with a magnitude M = 5.1 which occurred in Spain on May 11, 2011, is carried out. The obtained results show that a positive disturbance in the foF2 value was observed at the ionospheric Del’ebre station, which is the closest to the earthquake epicenter. At the same time, no disturbances in foF2 are revealed at ionospheric stations located at a greater distance from the epicenter. This fact makes it possible to conclude that the positive disturbance in the F2 layer observed at the Del’ebre station could have a sesmogenic nature.     

Vertical distribution of dissolved organic carbon (DOC) in the Western Mediterranean Sea in relation to the hydrological characteristics

Vertical profiles of dissolved organic carbon (DOC) from eight hydrological stations in the Tyrrhenian Sea, Sardinia Channel and Algerian Sea, are reported. DOC exhibits concentrations ranging from 58 to 88 μM in surface water, 43–57 μM in the intermediate layer and 49–63 μM in deep waters. The assessment of the hydrological characteristics allows different water masses in the study area to be identified; moreover, different hydrological processes are observed in the Tyrrhenian and Algerian basins. DOC exhibits different values in the different water masses. The lowest DOC concentrations (43–46 μM) were found in the Tyrrhenian Levantine Intermediate Water (LIW). Correlations between DOC and apparent oxygen utilization (AOU), investigated within each water mass, exhibit different behaviors in the intermediate and deep waters, suggesting the occurrence of different processes of oxygen consumption in the different water masses.     

Dynamic response of the leg of a tension leg platform subjected to an axial, suddenly applied load at one end

This paper deals with the solution of the problem of the dynamic response of the leg of a tension leg platform subjected to an axial, suddenly applied load at one end, considering a highly simplified model but taking into account several complicating factors. The problem is solved by means of a non-harmonic Fourier expansion in terms of eigenfunctions obtained from a non-regular Sturm-Liouville system.     

Near-Wall Flow Development After A Step Change In Surface Roughness

An experimental study of the initial flow field downstream of a step change in surface roughness is presented. The roughness length of the downstream surface was approximately tenfold that of the upstream roughness and, unlike all previous studies, attention was concentrated on the roughness sublayer region beneath the inertial (log-law) region. The experiments were conducted at a boundary layer Reynolds number of about 6 × 10⁴ (based on layer thickness andfree-stream velocity) and around a longitudinal location where the (downstream) roughness length, z_o2, was about 1% of the boundary-layer thickness atthe roughness change point.The thickness of the roughness sublayer was found for the two roughness. It was observed that the vertical profiles of mean velocity and turbulence characteristics started to show similarity after about 160z₀₂ downstream of the roughness change. The presence of a shear stress overshoot is shown to depend strongly on the precise location (with respect to the roughness elements) at which the measurements are made and the thickness of the equilibrium layer is shown to be very sensitive to the way it is defined. It is demonstrated that the growing equilibrium layer has first to encompass the roughness sublayer before any thickness of inertial sublayer can be developed. It follows that, in somepractical cases, like flows across some urban environments, the latter(log-law) region may never exist at all.     

Effects of heat/water flow interaction on compacted bentonite: Preliminary results

Compacted bentonite blocks have been heated and hydrated in a stainless steel cell in order to simulate, in the laboratory, the conditions of the clay barrier in a high-level radioactive waste repository. Temperature distributions at different times, rate of hydration, final water content and dry density have been measured. Some chemical parameters, as electrical conductivity in an aqueous extractable amorphous silica, have also been obtained. For the periods of time considered (up to 2500 h), the hydration process is not affected by the thermal gradient, the high suction of the bentonite being the critical factor in the initial water uptake of the clay barrier. A remarkable saline environment has been detected near the heater, due to salt migration towards dried areas. This phenomenon should be taken into account in further investigations of the mechanical and geochemical behaviour of the clay barrier.