A brief comparison of lava flows from the Deccan Volcanic Province and the Columbia-Oregon Plateau Flood Basalts: Implications for models of flood basalt emplacement

The nature and style of emplacement of Continental Flood Basalt (CFB) lava flows has been a matter of great interest as well as considerable controversy in the recent past. However, even a cursory review of published literature reveals that the Columbia River Basalt Group (CRBG) and Hawaiian volcanoes provide most of the data relevant to this topic. It is interesting to note, however, that the CRBG lava flows and their palaeotopographic control is atypical of other CFB provinces in the world. In this paper, we first present a short overview of important studies pertaining to the emplacement of flood basalt flows. We then briefly review the morphology of lava flows from the Deccan Volcanic Province (DVP) and the Columbia-Oregon Plateau flood basalts. The review underscores the existence of significant variations in lava flow morphology between different provinces, and even within the same province. It is quite likely that there were more than one way of emplacing the voluminous and extensive CFB lava flows. We argue that the establishment of general models of emplacement must be based on a comprehensive documentation of lava flow morphology from all CFB provinces.     

Gold dispersion in a tropical rainforest weathering profile at Dondo Mobi, Gabon

At Dondo Mobi in the gold district of Eteke, south Gabon, gold mineralization was studied in a tropical forest setting. The mineralization occurs in quartz veins within amphibolites of an Archaean gneiss-amphibolite series. Gold distribution patterns were studied in the different horizons of the weathering profile and in the different grain-size fractions of the materials sampled from three pits sunk in the weathered zone: upslope (pit P1), directly overlying (pit P2) and downslope (pit P3) of the mineralization.The weathering profile consists of an upper, thick, loose sandy argillaceous horizon (H1), an irregular nodular horizon with laterite nodules or blocks (H2) and a saprolite layer (H3) up to 70 m thick. In each pit, the specific geochemical signature of the bedrock is recognized in the three horizons of the weathering profile. Some groups of elements, e.g., Cr-Ni or Ba-V-P₂O₃, characterize amphibolite or black shale, respectively. Signal attenuations in the upper horizon can be explained by a homogenization effect. That can be related to a mushroom supergene dispersion, simultaneously inducing vertical decrease and lateral enrichment in element contents. Gold also mushrooms extensively in the different horizons of the weathering profile. The dispersion pattern is somewhat anisotropic, a strong enlargement being observed in the upper (H1) and intermediate nodular (H2) horizons alike. However, the evolution of Au distribution is not the same for all grain-size fractions: (a) in the finest fraction, Au is regularly distributed in the weathering profile at the anomalous top and tends to preserve an equivalent level of concentration laterally; (b) in the coarsest fraction, the maximum Au content is found in the upper horizon just above the mineralized structure; it is rapidly decreases laterally, in the surface halo.The Au geochemical dispersion halo consists mainly of fine-grained gold developed from rather coarse-grained mineralization. Its characteristics suggest that Au dispersion was produced as a result of Au dissolution together with collapse of the weathering profile causing gold migration over short distances.The minimal volumetric reduction of saprolite in the upper horizon can be estimated to be in the range of 60%, on the basis of the content of the different grain-size fractions and the density variations in the various horizons.In exploration, geochemical techniques, even using wide sample spacing, are proving quite adequate to prospect for Au in tropical rainforest weathering environment. Indeed, significant, well-contrasted dispersion haloes facilitate detection of rather confined mineralization.     

Ichnology of Bhuban and Boka Bil Formations,oligocene-miocene deposits of Manipur Western Hill,Northeast India

Oligocene-Miocene deposits of Bhuban and Boka Bil Formations, Surma Group, Manipur Western Hill consist of well preserved ichnofossil assemblages. These formations are represented by eight lithofacies such as Massive sandstone (Sm), Rippled marked argillaceous sandstone (Sr), Wavy laminated sandstone-siltstone-silty shale (Sw), Laminated shale (Fl), Massive mudstone (Fm), Trough cross-bedded sandstone (St), Lenticular laminated sandstonesiltstonesilty shale (Sll) and Laminated to massive sandstone-siltstone (Ssc). Fifteen ichnospecies were identified, which further categories into Skolithos, Cruziana, and Skolithos/Cruziana ichnofacies. Overall distribution pattern and behavioural nature of the ichnoassemblage and sedimentological attributes suggests that the sediments of Bhuban and Boka Bil Formations were deposited under frequent fluctuating sea level, moderate to strong energy condition, subtidal to lower intertidal environment, rich in organic nutrients.     

Element sets for high-order Poincaré mapping of perturbed Keplerian motion

The propagation and Poincaré mapping of perturbed Keplerian motion is a key topic in Celestial Mechanics and Astrodynamics, e.g., to study the stability of orbits or design bounded relative trajectories. The high-order transfer map (HOTM) method enables efficient mapping of perturbed Keplerian orbits using the high-order Taylor expansion of a Poincaré or stroboscopic map. The HOTM is only accurate close to the expansion point and therefore the number of revolutions for which the map is accurate tends to be limited. The proper selection of coordinates is of key importance for improving the performance of the HOTM method. In this paper, we investigate the use of different element sets for expressing the high-order map in order to find the coordinates that perform best in terms of accuracy. A new set of elements is introduced that enables extremely accurate mapping of the state, even for high eccentricities and higher-order zonal perturbations. Finally, the high-order map is shown to be very useful for the determination and study of fixed points and center manifolds of Poincaré maps.     

Template-based classification of SDSS-<Emphasis Type="BoldItalic">GALEX</Emphasis> point sources

We have classified a sample of 37,492 objects from SDSS into QSOs, galaxies and stars using photometric data over five wave bands (u, g, r, i and z) and UV GALEX data over two wave bands (near-UV and far-UV) based on a template fitting method. The advantage of this method of classification is that it does not require any spectroscopic data and hence the objects for which spectroscopic data is not available can also be studied using this technique. In this study, we have found that our method is consistent by spectroscopic methods given that their UV information is available. Our study shows that the UV colours are especially important for separating quasars and stars, as well as spiral and starburst galaxies. Thus it is evident that the UV bands play a crucial role in the classification and characterization of astronomical objects that emit over a wide range of wavelengths, but especially for those that are bright at UV. We have achieved the efficiency of 89% for the QSOs, 63% for the galaxies and 84% for the stars. This classification is also found to be in agreement with the emission line diagnostic diagrams.     

Aeolian dune migration along the Ceará coast, north-eastern Brazil

Aeolian dune dimensions and migration rates are analysed along the Ceará coast, north-east Brazil. Dunes that are currently mobile along the Ceará coast are composed of barchans and sand sheets. The results show that barchans maintain an equilibrium form, which can be characterized by values of dimensionless shape parameters H/W and W/L , where H is the dune height, W is the wing-to-wing width and L is the dune length. Dunes are highly mobile, with average migration rates of 17·5 m year⁻¹ for barchans and 10 m year⁻¹ for sand sheets. The calculated migration rates were found to depend strongly on dune dimensions for both barchans and sand sheets, i.e. the larger the dune is, the lower the migration rate will be. This size dependence was associated with the existence of a representative common transport rate along the dune fields, which induces a different dune migration rate dependent on dune size. Finally, from the observed dune evolution, an aggregated scale aeolian sediment transport was inferred. This bulk transport rate, of the order of 90–100 m³ m⁻¹ year⁻¹, is only valid for a timescale of years to decades, which is the timescale used in dune evolution analysis.     

Decoupling between the middle and upper crust during transpression-related lateral flow: Variscan evolution of the Aston gneiss dome (Pyrenees, France)

We present a structural, AMS, microstructural and kinematic study of the Aston gneiss dome (French Pyrenees), which consists of a core made up of orthogneiss and paragneiss intruded by numerous sills of Carboniferous peraluminous granite. The orthogneiss corresponds to a former Ordovician granitic laccolith. Four Variscan events have been evidenced in this gneiss dome: (i) D1 deformation observed only as relics in the orthogneisses and their country-rocks located above the sillimanite isograd, and characterized by a NS to NE–SW non coaxial stretch associated to top to the south motions (NS convergence); (ii) D2-a deformation observed in the orthogneisses and their country-rocks, mainly migmatitic paragneisses, located below the sillimanite isograd and in the peraluminous granites whatever their structural level, and characterized by an EW to N120°E stretch associated to a top to the east flat shearing (lateral flow in the hot middle crust in a transpressive regime); (iii) D2-b deformation characterized by EW-trending megafolds corresponding to the domes in the middle crust and by EW-trending tight folds with subvertical axial planes in the metasedimentary upper crust; (iv) subvertical medium-temperature mylonitic bands developed by the end of the transpression.The Aston massif is a good example of decoupling between a cold upper crust and a hotter middle crust overheated by a thermal event originated in the upper mantle. This decoupling allowed the lateral flow of the migmatitic middle crust along a direction at high angle with respect to the more or less NS-trending direction of convergence. We suggest that the HT-LP metamorphism developed before the formation of the domes during D2-a, coevally with the emplacement of numerous sills of peraluminous granite, whereas the emplacement of the large calc-alkaline plutons in the upper crust occurred by the end of D2-b. Our data invalidate the previous geodynamical models based on either early or late extensional regime to explain the development of the HT-LP metamorphism. This new interpretation of the dynamics of the Variscan crust of the Pyrenees is consistent with recent studies conducted in Archaean and Palaeoproterozoic hot continental crusts having undergone oblique convergence, and characterized by a competition between vertical thickening and lateral flow induced by the important rheological contrast between two thermally different levels.