Analysis of some aromatic hydrocarbons in a benzene-soluble bitumen from Green River shale

The hydrocarbon content of an aromatic fraction, isolated from the bitumen of Green River shale, was studied by mass spectrometry, infra-red spectrometry, gas chromatography and a dehydrogenation technique. The hydrocarbon types and their distribution in this aromatic fraction, as determined by mass spectrometry, include the following: C_nH_2n?6(10%), C_nH_{2n?8 (31 %)}, C_nH_2n?10(18%), C_nH_2n?12(12%), C_nH_2n?14(8%) and a series of alkenylbenzenes (20%). The carbon-number range, empirical formulae and quantity of each compound in the major types are reported. Mass spectra of several compounds and homologous mixtures of compounds isolated from the aromatic fraction are also given.     

Surface sensible heat flux over a deep moist convective region and its interplay with synoptic and mesoscale features

The surface parameters are being evaluated using a methodology which considers the vertical temperature structure of MONTBLEX ’90. For this 30 metre micrometeorological tower data are utilised. In this process, a concept of isolated layers has been introduced. The parameters have been evaluated following two successive iterative processes to give a consistent value both in the flux-profile relation and the related similarity relation. The heat flux obtained using the present methodology, is then utilised to examine its interplay with the synoptic as well as mesoscale features. The existence of such an interplay is observed.     

Recycling of Organic Matter in the Sediments of Santa Monica Basin,California Borderland

Geochemical and isotopic data for the uppermost 1.2 m of the sediments of the central Santa Monica Basin plain were examined to better understand organic matter deposition and recycling at this site. Isotopic signatures (Δ¹⁴C and δ¹³C) of methane (CH₄) and dissolved inorganic carbon (DIC) indicate the occurrence of anaerobic oxidation of CH₄ that is fueled by CH₄ supplied from a relict reservoir that is decoupled from local organic carbon (C_org) degradation and methanogenesis. This finding was corroborated by a flux budget of pore-water solutes across the basal horizon of the profile. Together these results provide a plausible explanation for the anomalously low ratio between alkalinity production and sulfate consumption reported for these sediments over two decades ago. Shifts in Δ¹⁴C and δ¹³C signatures of C_org have previously been reported across the 20-cm depth horizon for this site and attributed to a transition from oxic to anoxic bottom water that occurred ~350 years BP. However, we show that this horizon also coincides with a boundary between the base of a hemipelagic mud section and the top of a turbidite interval, complicating the interpretation of organic geochemical data across this boundary. Radiocarbon signatures of DIC diffusing upward into surface sediments indicate that remineralization at depth is supported by relatively ¹⁴C-enriched C_org within the sedimentary matrix. While the exact nature of this C_org is unclear, possible sources are hemipelagic mud sections that were buried rapidly under thick turbidites, and ¹⁴C-rich moieties dispersed within C_org-poor turbidite sections.     

Geomorphological hazards related to deep dissolution phenomena in the Western Italian Alps: Distribution, assessment and interaction with human activities

Deep dissolution affects great part of soluble rocks (e.g. gypsum and anhydrite) of the Western Italian Alps. The related superficial phenomena (sinkholes, gravity-induced processes and a local worsening of geomechanical rock properties) are not limited to typical karsts landscape and cause slope instability also affecting populated sites and infrastructures. The paper aims to describe general characteristic of dissolution phenomena, to interpret their conditioning factors and evolutionary stages and to assess possible hazards due to their superficial effects.The search for evidences of deep dissolution leads to the selection of representative sites in the central part of the Western Italian Alps (Piemonte and Valle d'Aosta Region). Detailed geological and geomorphological studies have been used to classify the selected sites by type, size and variable state of activity. Very different evolutionary stages of dissolution phenomena have been interpreted by comparison of case-studies: some are early “embryonic”; others are more evolved, up to typical sinkholes, or even remodelled by other phenomena. Some cases show an extreme complexity in the interactions between corrosion phenomena and other geomorphic processes: slope deformations, from one side, and karst, fluvial and glacial phenomena, to the other. A wide range of movement rates on slope instabilities induced by deep dissolution have been estimated by topographic and geomorphic data. Geochemical data on removed rocks by dissolution indicate 0.4 mm/year values for local subsidence. Historical and technical data indicate low frequency of major dissolution-induced collapses, but highlight widespread damages to tunnels, roads and buildings, especially along slopes.     

Ilmenite composition in the Tellnes Fe–Ti deposit,SW Norway: fractional crystallization,postcumulus evolution and ilmenite–zircon relation

Major and trace element XRF and in situ LA-ICP-MS analyses of ilmenite in the Tellnes ilmenite deposit, Rogaland Anorthosite Province, SW Norway, constrains a two stage fractional crystallization model of a ferrodioritic Fe-Ti-P rich melt. Stage 1 is characterized by ilmenite-plagioclase cumulates, partly stored in the lower part of the ore body (Lower Central Zone, LCZ), and stage 2 by ilmenite-plagioclase-orthopyroxene-olivine cumulates (Upper Central Zone, UCZ). The concentration of V and Cr in ilmenite, corrected for the trapped liquid effect, (1) defines the cotectic proportion of ilmenite to be 17.5 wt% during stage 1, and (2) implies an increase of D _V^Ilm during stage 2, most likely related to a shift in fO₂. The proportion of 17.5 wt% is lower than the modal proportion of ilmenite (ca. 50 wt%) in the ore body, implying accumulation of ilmenite and flotation of plagioclase. The fraction of residual liquid left after crystallization of Tellnes cumulates is estimated at 0.6 and the flotation of plagioclase at 26 wt% of the initial melt mass. The increasing content of intercumulus magnetite with stratigraphic height, from 0 to ca. 3 wt%, results from differentiation of the trapped liquid towards magnetite saturation. The MgO content of ilmenite (1.4–4.4 wt%) is much lower than the expected cumulus composition. It shows extensive postcumulus re-equilibration with trapped liquid and ferromagnesian silicates, correlated with distance to the host anorthosite. The Zr content of ilmenite, provided by in situ analyses, is low (<114 ppm) and uncorrelated with stratigraphy or Cr content. The data demonstrate that zircon coronas observed around ilmenite formed by subsolidus exsolution of ZrO₂ from ilmenite. The U-Pb zircon age of 920 ± 3 Ma probably records this exsolution process. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Infrared spectroscopic investigation of hydroxyl in β-(Mg,Fe)2SiO4 and coexisting olivine: Implications for mantle evolution and dynamics

Wadsleyite (β-(Mg,Fe)₂SiO₄) is a major constituent of the Earth's transition zone and is known to accommodate OH. The portion of the transition zone between 400–550 km could be an important source or sink for hydroxyl in plumes and slabs intersecting this region. Micro-infrared spectroscopy has been carried out on the β-phase and coexisting metastable olivine synthesized in a multianvil apparatus at 14 GPa and 1550–1650 K under hydrous conditions. Single-crystal and polycrystal specimens of both phases were analyzed in the 1800–8500 cm^?1 frequency region to determine the speciation, abundances, and partitioning behavior of the hydrous components in coexisting β-phase and olivine. β-phase spectra consistently show three distinct OH bands at 3329, 3580, and 3615 cm^?1. OH concentrations range from 10000–65000 H/10⁶ Si. A strong positive correlation of grain size and extent of transformation with OH concentration in the β-phase indicates that grain-growth and transformation rates are enhanced in a hydrous environment. Olivine spectra are variable, but consistently show a prominent broad-band absorbance representing molecular H₂O, consistent with the infrared signature of the starting material. OH concentrations in olivine range from <300–1400 H/10⁶ Si. The highest OH concentrations measured for olivine and the β-phase may represent solubility limits, in which case the OH solubility ratio between these two phases is approximately 1∶40. Where both phases coexist and are undersaturated with OH, the partitioning ratio of OH between them is about 1∶100. The large solubility contrast between olivine and the β-phase suggests a mechanism for hydrating the transition zone via olivine carried down in subducting slabs. Plumes impinging on an OH-rich upper transition region could cause H₂ or H₂O to be released upon transformation of the β-phase to olivine, resulting in initiation of secondary upwellings. If dissolution of OH weakens the β-phase, and if OH is present in the mantle, the region between 400–550 km could be a zone of low viscosity.     

Some properties of flows in unsaturated soils with an exponential dependence of the hydraulic conductivity upon the pressure head

A systematic development of the consequences of an exponential dependence of the hydraulic conductivity upon the pressure head is presented. Alternative expressions for the flux are discussed in detail. For steady flows, partial differential equations in terms of the matric flux potential, the pressure head, and the total head are derived. For steady, plane and axially symmetric flows, partial differential equations for the stream function are given. A theoretical basis for the construction of viscous flow analogs for steady, plane and axially symmetric flows is also presented.     

Restrain of a seismically isolated bridge by external stoppers

The current design of seismically isolated bridges usually combines the use of bearings and stoppers, as a second line of defence. The stoppers allow the development of the in-service movements of the bridge deck, without transmitting significant loads to the piers and their foundations, while during earthquake they transmit the entire seismic action. Despite the fact that stoppers, which restrain the transverse seismic movements of the deck, are used frequently in seismically isolated bridges, the use of longitudinal stoppers is relatively rare, mainly due to the large in-service constraint movements of bridges. The present paper proposes a new type of external longitudinal stoppers, which are installed in stiff sub-structures-boundaries, aiming at limiting the bridge seismic movements. The parametric investigation, which was conducted in order to identify the seismic efficiency of the external stoppers, showed that the interaction of the bridge with the stiff boundaries can lead to significant reductions in the seismic movements of the bridge. Serviceability is appropriately arranged in the paper by expansion joints and approach slabs.