Thorium isotopes as tracers of particles dynamics and deep water circulation in the Indian sector of the Southern Ocean (ANTARES IV)

Dissolved and particulate samples were collected to study the distribution of thorium isotopes (²³⁴Th, ²³²Th and ²³⁰Th) in the water column of the Indian sector of the Southern Ocean (from 42°S to 47°S and from 60°E to 66°E, north of the Polar Front) during Austral summer 1999. Vertical profiles of excess ²³⁰Th (²³⁰Th_xs) increases linearly with depth in surface water (0–100 m) and a model was applied to estimate a residence time relative to the thorium scavenging (τ_scav). Low τ_scav in the Polar Front Zone (PFZ) are found, compared to those estimated in the Subtropical Front Zone (STZ). Changes in particle composition between the PFZ and STZ could influence the ²³⁰Th_xs scavenging efficiency and explain this difference. An innovative coupling between ²³⁴Th and ²³⁰Th_xs was then used to simultaneously constrain the settling velocities of small (0.6–60 μm) and large (above 60 μm) particles. Although the different hydrological and biogeochemical regimes visited during the ANTARES IV cruise did not explain the spatial variation of sinking velocity estimates, our results indicate that less particles may reach the seafloor north (60 ± 2 m d^− 1, station 8) than south of the Agulhas Return Current (119 ± 23 and 130 ± 5 m d^− 1 at stations 3 and 7, respectively). This information is essential for understanding particle transport and by extension, carbon export. In the deep water column, the ²³⁰Th_xs concentrations did not increase linearly with depth, probably due to lateral transport of North Atlantic Deep Water (NADW) from the Atlantic to the Indian sector, which renews the deep waters and decreases the ²³⁰Th_xs concentrations. A specific ²³⁰Th_xs transport model is applied in the deep water column and allows us to assess a “travel time” of NADW ranging from 2 to 15 years.     

Artificial upwelling induced by ocean currents —Theory and experiment

A submerged apparatus, which consists of a buoy, several horizontal contraction and expansion tubes (Venturi-type tubes) and a long pipe, is expected to be used to pump the subsurface sea-water (200–300 meter depth) containing abundant nutrients to surface layer (50–100 m) by the dynamic of ocean currents. i.e. an artificial upwelling without energy cost. A preliminary experiment and analysis are undertaken and shows that the capacity of pumping the nutrient-rich sea-water is worth to build a pilot prototype model.     

Ridge development as revealed by sub-bottom profiles on the central New Jersey shelf

Closely-spaced 3.5 kHz seismic profiles were collected over the north-easterly trending ridge and swale system 50 km east-southeast of Atlantic City, New Jersey. They yield information on the Late Quaternary depositional history of the area, and on the origin of the ridge system. Four of the sub-bottom reflectors identified were sufficiently persistent to warrant investigation and interpretation. These reflectors, which have been cored, lithologically identified, and radiocarbon dated, are stratigraphically higher than the reflectors dealt with by the majority of previous studies. The upper three reflectors are definitely mid- and post-Wisconsin in age and present a record of the most recent glacial cycle. The upper three units associated with the observed reflectors appear to exert a pronounced influence on the bathymetry. The gently corrugated ridge system of Holocene sand is formed over the regionally flat-lying upper unit, an Early Holocene lagoonal silty clay. The characteristically flat, broad depressions of the area are floored by this lagoonal material. Locally, however, marine scour has cut through the silty clay into an underlying unit of unconsolidated fine Pleistocene sand. Several stages of trough development appear to be represented. After penetrating the lagoonal clay, troughs are initially narrow, but when incised through the sand into a lower, Pleistocene, silty-clay unit, the troughs become notably wider. As downcutting is inhibited by the lower clay, the upper clay is undercut as the trough widens in a fashion similar to a desert blowout.

The sub-bottom reflectors indicate that ridge development on the central shelf has involved aggradation as well as erosion. Some ridges seem to have grown by vertical and lateral accretion from small cores. The internal structure of other ridges suggests that they formed by the coalescence of several small ridges. Others appear to have undergone appreciable lateral migration.

The ridges appear to be in a state of continuing adjustment to the hydraulic regime of the deepening post-Pleistocene water column.     

Sediment–water interactions of natural oestrogens under estuarine conditions

The natural human female hormones oestrone and 17β-oestradiol have been implicated in the disruption of endocrine systems in some wildlife adjacent to sewage effluents. The sorption behaviour of these two compounds under estuarine conditions was studied by spiking either 2.55 μg of oestrone or 2.65 μg of 17β-oestradiol in kinetic experiments. In equilibrium experiments, 3 ng of oestrone or 3.2 ng of 17β-oestradiol was added in each of the centrifuge tubes. Sorption onto sediment particles was relatively slow, with sorption equilibrium being reached in about 70 and 170 h for oestrone and 17β-oestradiol, respectively. The effects of a variety of environmental parameters on sorption were studied including salinity, sediment concentration (SC), the presence of a third phase, particle size and, also, surfactant concentrations. Results show that although salinity did not induce any statistically significant effect on the sorption of 17β-oestradiol, it did statistically enhance the sorption of oestrone, and a salting constant of 0.3 l mol⁻¹ was derived. The partition coefficient for both compounds decreased with increasing sediment concentration, a phenomenon that has been widely reported and attributed to the presence of colloids (which could enhance dissolved concentrations). In this paper, the true partition coefficients for sediment particles (K_p^true) and colloidal particles (K_c^true) have been calculated, and a K_p^true value of 141 and 102 ml g⁻¹ was obtained for oestrone and 17β-oestradiol, respectively. In addition, K_c^true values for oestrone (222×10² ml g⁻¹) and 17β-oestradiol (135×10² ml g⁻¹) were two orders of magnitude higher than their respective K_p^true values, suggesting that the colloidal particles are significantly stronger sorbents for natural oestrogens than sediment particles. Particles of different sizes were found to have different partition coefficients due to the strong relationships between partition coefficients for the two compounds and particulate organic carbon (POC) contents and specific surface areas (SSAs). The presence of a surfactant was shown to reduce the partition coefficients for the two compounds, although its concentrations being used were higher than those normally found in the natural environment.     

An experimental pressure compensated wet suit

Personal thermal insulation by means of neoprene from wet suits provides adequate temporary control of body heat loss only at the shallow end of the air diving depth range, but it constitutes by far the most popular approach to diver thermal support. Howewer, compression of the trapped gas phase in neoprene foam seriously reduces its insulation performance on exposure to high ambient pressure. With conventional wet suits equipped with heating, the necessary level of power required at depths greater than about 30 m is too high, and also unsafe without the back up that increased insulation would provide. One approach to the goal of depth-insensitive insulation is to use a wet suit with a continuous internal gas space pressurized nominally to ambient pressure, so that its thickness remains substantially constant at all depths. The composite material properties required are: outer skins that are tough, flexible and free of pin holes; an open foam internal structure capable of resisting, without significant dimensional change, the relatively small pressure changes that occur over the height of a man; and a high bond strength.Samples of a composite material that meets these requirements have been developed, and a prototype suit has been successfully fabricated by conventional techniques.     

The buckling of a corrugated carbon fibre cylinder under external hydrostatic pressure

A theoretical and an experimental investigation was carried out, where a carbon fibre corrugated circular cylinder was tested to destuction under external hydrostatic pressure. The theoretical investigation was via the finite element method, where the structure was modelled with several orthotropic axisymmetric thin-walled shell elements. The experimental observations were aided with strategically placed strain gauges. Comparison between theory and experiment showed that the experimentally observed buckling pressure was a little lower than the theoretical prediction. This may have been due to the fact that the model had slight initial geometrical imperfections in the circumferenential direction.     

Bacterioplankton growth and production at the Louisiana hydrocarbon seeps

The growth rate and potential production of bacterioplankton in cold hydrocarbon seeps located along the Louisiana coast were determined using a pulse-labeling technique. Surprisingly, community doubling times are on the order of 1.1 h, which compares to laboratory-grown cultures. We also found that there are differences in growth rates on relatively small geographic scales, suggesting the influence of site-specific geological features (e.g., gas hydrate mounds). Proceeding downslope to deeper waters, methane-oxidizing bacteria appeared to play a more significant role in community productivity. These preliminary experiments indicated, quite unexpectedly, that water column microbes are growing at a more rapid rate than in any other marine system so far studied and that methane may serve as a primary nutrient (carbon) source in these seep-associated microbial assemblages.