MRSP—The muenster redshift project. Astrometric determination of the reference point for wavelength measurements on low-dispersion objective prism plates

The zero point of galaxy redshifts measured from objective prism plates (dispersion 246 nm/mm at H) as part of the Muenster Redshift Project (MRSP) is obtained through transformation of object positions from the corresponding direct plate. Approximately 1000 G-type stars, classified automatically, are used. On the direct plate, positions are obtained from intensity-weighted first moments. On the objective prism plate, object positions are give through the CaII-break and marginal fits to the unwidened spectra. The transformation equations include quadratic terms in the direction of dispersion. The inclusion of third-order and colour terms is discussed. The mean residuals are approximately 0".33 (5 m on the plate), corresponding to a redshift error of about 700 km/s at z=0.0. This error results mainly from the uncertainty in locating the CaII-break in the low-dispersion spectra. Radial velocities are obtained from the difference between the expected and the measured positions of the CaII-break in the galaxy spectra.     

Eddy Detection Over Southern Indian Ocean Using TOPEX/POSEIDON Altimeter Data

Field biological and geomorphological observations in certain East Asia coasts permit definition of Mean Sea Level (MSL) with an accuracy of ～10 cm, that is, a vertical geodetic datum, as well as recognition of the MSL of fossil shorelines, up to a few thousand years old, mainly associated with tectonic/seismic effects. Subsidence produced by compaction of nearly-surficial strata seems also to be a usual effect. These data indicate that datum variability is a widespread effect in East Asia, time-dependent even at time scales affecting engineering works, but only in a few cases fully predictable.     

Characteristics of surface ozone in Agra,a sub-urban site in Indo-Gangetic Plain

In the present study, measurements of surface ozone (\(\hbox {O}_{3}\)) and its precursors (NO and \(\hbox {NO}_{2}\)) were carried out at a sub-urban site of Agra (\(27{^{\circ }}10'\hbox {N}\), \(78{^{\circ }}05'\hbox {E}\)), India during May 2012–May 2013. During the study period, average concentrations of \(\hbox {O}_{3}\), NO, and \(\hbox {NO}_{2}\) were \(39.6 \pm 25.3\), \(0.8 \pm 0.8\) and \(9.1 \pm 6.6 \, \hbox {ppb}\), respectively. \(\hbox {O}_{3}\) showed distinct seasonal variation in peak value of diurnal variation: summer \({>}\) post-monsoon \({>}\) winter \({>}\) monsoon. However, \(\hbox {NO}_{2}\) showed highest levels in winter and lowest in monsoon. The average positive rate of change of \(\hbox {O}_{3}\) (08:00–11:00 hr) was highest in April (16.3 ppb/hr) and lowest in August (1.1 ppb/hr), while average negative rate of change of \(\hbox {O}_{3}\) (17:00–19:00 hr) was highest in December (–13.2 ppb/hr) and lowest in July (–1.1 ppb/hr). An attempt was made to identify the \(\hbox {VOC--NO}_{\mathrm{x}}\) sensitivity of the site using \(\hbox {O}_{3}/\hbox {HNO}_{3}\) ratio as photochemical indicator. Most of the days this ratio was above the threshold value (12–16), which suggests \(\hbox {NO}_{\mathrm{x}}\) sensitivity of the site. The episodic event of ozone was characterized through meteorological parameters and precursors concentration. Fine particles (\(\hbox {PM}_{2.5}\)) cause loss of ozone through heterogeneous reactions on their surface and reduction in solar radiation. In the study, statistical analyses were used to estimate the amount of ozone loss.     

A study on the adsorption of chromium on laterite from Guizhou Province,China

The adsorption behaviors of Cr(VI) on laterite from Guizhou Province were studied in this paper, and the adsorption mechanism was discussed as well. Results showed that different mineral compositions in the laterite would cause differences in the capacity of laterite to absorb Cr(VI). Gibbsite, iron oxide minerals and non-crystalloids are the main contributors to enhancing the capacity of laterite to absorb Cr(VI). The pH of the solution is an important factor affecting the adsorption of Cr(VI) on laterite. Acidic environment (pH=2–5) is favorable to the adsorption of Cr(VI). The amount of adsorbed Cr(VI) decreases with increasing pH of the solution. With increasing initial concentrations of Cr(VI), the amount of adsorbed Cr(VI) increases first, and then decreases. The optimal adsorption concentration of Cr(VI) on laterite is 250 μg/mL. The adsorption of Cr(VI) on laterite is a rapid process, about 80% Cr(VI) will be adsorbed within 2 hours. And the adsorption of Cr(VI) on kaolinite is a slow process.     

The development and structure of bright active regions at 2.8 cm

The development of three intense active centers during their appearance on the solar disk is examined using high resolution observations at 2.8 cm. Each region shows a very bright component with brightness temperature > 10⁶ K and size smaller than 20.The development of the bright components have been investigated on different time scales. Intensity fluctuations on a time scale of minutes are within the instrumental accuracy while the evolution over periods of days shows a variation of the flux density up to 30–40% per day.The problem of the bright cores height is discussed. Heights within 10 × 10³ and 40 × 10³ km are found using their apparent displacement on the disk.     

RAGLAND,AN LL3.4 CHONDRITE FIND FROM NEW MEXICO

The Ragland, New Mexico chondrite was found in 1978, and consists of a single stone of 12.16 kg that broke into three pieces. The stone is moderately weathered and has a pronounced chondritic texture. Bulk composition favors an LL classification, and modal analysis and oxygen isotopic composition are consistent with this. The thermoluminescence sensitivity of 0.056 ± 0.020 normalized to Dhajala, compositional variability of olivine (mean Fa 18.3, σ = 10.1) and low-Ca pyroxene (mean Fs 14.6, σ = 6.7), and Ca concentrations in olivine indicate metamorphic subtype 3.4 ± 0.1. The isotopically heavy oxygen composition, which is characteristic of subtypes 3.0–3.1, may be a primary characteristic and not a result of weathering. Low concentrations of radiogenic ⁴⁰Ar and planetary ³⁶Ar suggest noble gas loss.     

New insights on the QSO radio-loud/radio-quiet dichotomy: SDSS spectra in the context of the 4D eigenvector1 parameter space

We search for a dichotomy/bimodality between radio-loud (RL) and radio-quiet (RQ) type 1 active galactic nuclei (AGN). We examine several samples of Slogan Digital Sky Survey (SDSS) quasi-stellar objects (QSOs) with high signal-to-noise ratio optical spectra and matching Faint Images of the Radio Sky at Twenty-cm/NRAO VLA Sky Survey (FIRST/NVSS) radio observations. We use the radio data to identify the weakest RL sources with a Fanaroff–Riley type II (FR II) structure to define a RL/RQ boundary which corresponds to log   L _1.4 GHz= 31.6  erg s⁻¹ Hz⁻¹. We measure the properties of broad-line Hβ and Fe  ii emission to define the optical plane of a 4DE1 spectroscopic diagnostic space. The RL quasars occupy a much more restricted domain in this optical plane compared to the RQ sources, which a 2D Kolmogorov–Smirnov test finds to be highly significant. This tells us that the range of broad-line region kinematics and structure for RL sources is more restricted than for the RQ QSOs, which supports the notion of dichotomy. FR II and CD RL sources also show significant 4DE1 domain differences that likely reflect differences in line-of-sight orientation (inclined versus face-on, respectively) for these two classes. The possibility of a distinct radio-intermediate (RI) population between RQ and RL source is disfavoured because a 4DE1 diagnostic space comparison shows no difference between RI and RQ sources. We show that searches for dichotomy in radio versus bolometric luminosity diagrams will yield ambiguous results mainly because in a reasonably complete sample, the radio brightest RQ sources will be numerous enough to blur the gap between RQ and RL sources. Within resolution constraints of NVSS and FIRST, we find no FR I sources among the broad-line quasar population.     

Boltysh,another end‐Cretaceous impact

Abstract— The Chixculub impact occurred at the Cretaceous/Tertiary (K/T) boundary, and although several other Late Cretaceous and Paleogene impact craters have, at times, been linked with the K/T boundary, isotope geochronology has demonstrated that all have significantly different ages. The currently accepted age of the 24 km diameter Boltysh crater, a K‐Ar whole‐rock age, places it in the Coniacian at 88 ± 3 Ma. However, comprehensive Ar‐Ar dating of a range of melt samples yields a mean age of 65.17 ± 0.64 Ma, within errors of the K/T boundary. Several of the fresh samples exhibit signs of excess argon but this seems to be concentrated in rapidly crystallized glass‐rich samples. The Ar‐Ar age confirms an earlier fission track measurement and thus two dating techniques have yielded an age within errors of the K/T boundary for this crater. Crucially, although the ages of Boltysh and Chixculub are within errors, they may not have formed synchronously. Craters of 24 km diameter occur much more commonly than impacts of Chixculub dimensions, but their proximity does raise the important question of how many impacts there might have been close to the K/T boundary.     

Towards an understanding of joint roughness

Summary It is argued that the currently available joint models are incapable of accurate predictions of joint shear behaviour without resorting to substantial levels of empiricism. This is because these models fail to adequately quantify joint roughness, or appreciate the importance of scale. A novel approach, which uses fractal geometry to investigate joint roughness, is described. This approach goes beyond describing the symptoms of roughness and seeks to find the cause. In the application of this approach, the concepts of fractal geometry, fractal dimension and self similarity are described and used as a framework to formulate a statistically based and practical model for the characterisation of rock joint roughness. Important relationships between the fractal dimension and the more useful statistical parameters of standard deviation of both asperity angles and asperity heights are derived. These relationships not only provide a useful, working method for quantifying joint roughness, but are also shown to provide a basis for understanding the Barton empirical JRC-JCS model. In addition, the fractal model is able to provide conceptual models for the effects of normal stress on the shear behaviour of joints and the scale-dependence of joints.     

The task of reconstructing the motion of an object by magnetic measurements

We examine the problem of determining the spatial position of a triaxial magnetometer onboard an artificial satellite by measuring the fields in orbit. Such a task is interesting from the point of view that to solve it, data on the satellite and the character of its motion in orbit are not used. We obtain explicit expressions for the Euler angles via the field components measured in orbit and taken from a field model, which is considered given.