Geophysical and geochemical observations on actively seeping hydrocarbon gases on the south-eastern Yellow Sea continental shelf

In the southeastern Yellow Sea, active seepage of hydrocarbon gases has been observed by high-resolution (3.5 kHz) seismic profiling both in 1987 and 2001, occurring through a large number of plumes from the topmost pre-Holocene sedimentary layer. It is strong enough to compensate for current speed, extending vertically up to the sea surface. The gas seepage often appears to be explosive to form craters and diapirs, although pockmarks are rare due to the redistribution of mobile palimpsest sands. In core-top seawater and sediments, the gases are characterized by high amounts of C₂, homogenous ¹³C₁ values and a large difference (19.7 on average) between ¹³C₁ (–55.2 to –53.6 PDB) and ¹³C₂ (–36.8 to –32.5 PDB) values. The gases are considered to be generated with a smaller amount of C₁ at the early thermal cracking stage of labile source materials, after which the C₂ gas is enriched in ¹³C by diffusion or biological alternation at the generation or accumulation site. The homogenous ¹³C₁ values may be one of the geochemical characteristics of gases acquired at depth which are less altered in the case of rapid diffusive gas migration to the seafloor.     

Development of two novel CYP-antibodies and their use in a PCB exposure experiment with Mytilus edulis

In an attempt to learn more about the cytochrome P450 (CYP) system of mussels, we used protein databases and alignment software to extract highly conserved CYP sequences. From these alignments synthetic peptides were produced and used for rabbit immunisation, which yielded polyclonal antibodies against the CYP families 2 and 4. The antibodies were evaluated with Western Blot and ELISA assays, using digestive gland microsomal samples from the mussel Mytilus edulis. Western Blots revealed immunoreactions for both antibodies. The anti-CYP2 sequence rendered one major immunopositive protein of approximately 49 kDa size, and weak signals for proteins of approximately 41 and 56 kDa size. The anti-CYP4 sequence rendered two major bands of approximately 56 and 59 kDa size, and also a weak immunoreaction with a protein of approximately 43 kDa size. ELISA rendered only weak signals even with a 1:50 dilution of IgG-purified serum. A 10-day exposure to Aroclor 1254 did not appear to affect any of the immunopositive proteins, while total PCBs in soft bodies increased from 14-40 ng/g DW in controls to 373-638 ng/g DW in exposed mussels.     

Estimation of Sea Ice Thickness from SARAL/AltiKa in Drifting Orbit Phase

Abstract

Intra and inter-annual variations in the sea ice thickness are highly sensitive indicators of climatic variations undergoing in the earth’s atmosphere and oceans. This paper describes the method of estimating sea ice thickness using radar waveforms data acquired by SARAL/Altika mission during its drifting orbit phase from July 2016 onwards yielding spatially dense data coverage. Based on statistical analysis of return echoes, classification of the surface has been carried out in three different types, viz. floe, lead and mixed. Time delay correction methods were suitably selected and implemented to make corrections in altimetric range measurements and thereby freeboard. By assuming hydrostatic equilibrium, freeboard data were converted into sea ice thickness. Results show that sea ice thickness varies from 4 to 5?m near ice shelves and 1 to 2.5?m in the marginal sea ice regions. Freeboard and sea ice thickness estimates were also validated using NASA’s Operation Ice Bridge (OIB) datasets. Freeboard measurements show very high correlation (0.97) having RMSE of 0.13. Overestimation of approximately 1–2?m observed in the sea ice thickness, which could be attributed to distance between AltiKa footprint and OIB locations. Moreover, sensitivity analysis shows that snow depth and snow density over sea ice play crucial role in the estimation of sea ice thickness.     

Occurrence of Nummulitic coralline limestone from offshore Palar Basin,Bay of Bengal,India

Abstract

Palar basin is located between Pennar and Cauvery sedimentary basins of East coast of India in Bay of Bengal, northeast Indian Ocean. Sea floor drill (Wire-line Autonomous Coring System – WACS) with operational capability of up to 3000?m water depth was developed to collect long cores from deep sea floor for geotechnical and ocean resource assessment studies. During the drilling operation it encountered Nummulitic coralline limestone of Lower Eocene age at 18 meters below the seafloor (mbsf) at 850?m water depth indicating carbonated platform presence for the first time at the study region. Bathymetry contour from Naval Hydrography Chart and General Bathymetric Chart of the Oceans (GEBCO) has revealed the presence of shallow mounds from 50 to 200?m depth closure contour near the sampling site at 850?m water depth which might be a submerged carbonated structure. Since, Nummulites are shallow water dwelling fauna (<20?m depth) but its occurrence at 18 mbsf in 850?m water depth is recorded because of the advancement in technology tool for long core sampling by means of sea floor drill.     

Artificial upwelling induced by ocean currents —Theory and experiment

A submerged apparatus, which consists of a buoy, several horizontal contraction and expansion tubes (Venturi-type tubes) and a long pipe, is expected to be used to pump the subsurface sea-water (200–300 meter depth) containing abundant nutrients to surface layer (50–100 m) by the dynamic of ocean currents. i.e. an artificial upwelling without energy cost. A preliminary experiment and analysis are undertaken and shows that the capacity of pumping the nutrient-rich sea-water is worth to build a pilot prototype model.     

Ridge development as revealed by sub-bottom profiles on the central New Jersey shelf

Closely-spaced 3.5 kHz seismic profiles were collected over the north-easterly trending ridge and swale system 50 km east-southeast of Atlantic City, New Jersey. They yield information on the Late Quaternary depositional history of the area, and on the origin of the ridge system. Four of the sub-bottom reflectors identified were sufficiently persistent to warrant investigation and interpretation. These reflectors, which have been cored, lithologically identified, and radiocarbon dated, are stratigraphically higher than the reflectors dealt with by the majority of previous studies. The upper three reflectors are definitely mid- and post-Wisconsin in age and present a record of the most recent glacial cycle. The upper three units associated with the observed reflectors appear to exert a pronounced influence on the bathymetry. The gently corrugated ridge system of Holocene sand is formed over the regionally flat-lying upper unit, an Early Holocene lagoonal silty clay. The characteristically flat, broad depressions of the area are floored by this lagoonal material. Locally, however, marine scour has cut through the silty clay into an underlying unit of unconsolidated fine Pleistocene sand. Several stages of trough development appear to be represented. After penetrating the lagoonal clay, troughs are initially narrow, but when incised through the sand into a lower, Pleistocene, silty-clay unit, the troughs become notably wider. As downcutting is inhibited by the lower clay, the upper clay is undercut as the trough widens in a fashion similar to a desert blowout.

The sub-bottom reflectors indicate that ridge development on the central shelf has involved aggradation as well as erosion. Some ridges seem to have grown by vertical and lateral accretion from small cores. The internal structure of other ridges suggests that they formed by the coalescence of several small ridges. Others appear to have undergone appreciable lateral migration.

The ridges appear to be in a state of continuing adjustment to the hydraulic regime of the deepening post-Pleistocene water column.     

Geopotential topography of deep levels in the Pacific Ocean

After examination of the baroclinic structure below 3000 db, recent data were used to map the geopotential topography at 1000, 1500, and 2000 db (referred to 3000 db) in the Pacific Ocean. In the high-latitude regions and in the western boundary currents, considerable relief is present at 1000 and 1500 db, and the Circumpolar Current is still well-developed at 2000 db. The geostrophic circulation inferred is very similar to the surface circulation in these areas. Neglect of the structure below 1000 db results in appreciable errors in estimates of the transport of these currents; direction of near-surface flow is properly shown, however, and computed speeds are not greatly in error. In the equatorial Pacific and central North Pacific, little relief is present, and the trends are generally unlike the surface flow.     

An experimental pressure compensated wet suit

Personal thermal insulation by means of neoprene from wet suits provides adequate temporary control of body heat loss only at the shallow end of the air diving depth range, but it constitutes by far the most popular approach to diver thermal support. Howewer, compression of the trapped gas phase in neoprene foam seriously reduces its insulation performance on exposure to high ambient pressure. With conventional wet suits equipped with heating, the necessary level of power required at depths greater than about 30 m is too high, and also unsafe without the back up that increased insulation would provide. One approach to the goal of depth-insensitive insulation is to use a wet suit with a continuous internal gas space pressurized nominally to ambient pressure, so that its thickness remains substantially constant at all depths. The composite material properties required are: outer skins that are tough, flexible and free of pin holes; an open foam internal structure capable of resisting, without significant dimensional change, the relatively small pressure changes that occur over the height of a man; and a high bond strength.Samples of a composite material that meets these requirements have been developed, and a prototype suit has been successfully fabricated by conventional techniques.     

The buckling of a corrugated carbon fibre cylinder under external hydrostatic pressure

A theoretical and an experimental investigation was carried out, where a carbon fibre corrugated circular cylinder was tested to destuction under external hydrostatic pressure. The theoretical investigation was via the finite element method, where the structure was modelled with several orthotropic axisymmetric thin-walled shell elements. The experimental observations were aided with strategically placed strain gauges. Comparison between theory and experiment showed that the experimentally observed buckling pressure was a little lower than the theoretical prediction. This may have been due to the fact that the model had slight initial geometrical imperfections in the circumferenential direction.