Changes in the hydrography of Central California waters associated with the 1997–98 El Niño

Oceanographic conditions off Central California were monitored by means of a series of 13 hydrographic cruises between February 1997 and January 1999, which measured water properties along an oceanographic section perpendicular to the California Coast. The 1997–98 El Niño event was defined by higher than normal sea levels at Monterey, which began in June 1997, peaked in November 1997, and returned to normal in March 1998. The warming took place in two distinct periods. During June and July 1997, the sea level increased as a result of stronger than normal coastal warming below 200 dbars and within 100 km of the coast, which was associated with poleward flow of saltier waters. During this period, deeper (400–1000 dbar) waters between 150–200 km from shore were also warmed and became more saline. Subsequently, sea level continued to rise through January 1998, mostly as a result of the warming above 200 dbars although, after a brief period of cooling in September 1997, waters below 200 dbar were also warmer than normal during this period. This winter warm anomaly was also coastally trapped, extending 200 km from shore and was accompanied by cooler and fresher water in the offshore California current. In March and April 1998, sea level dropped quickly to normal levels and inshore waters were fresher and warmer than the previous spring and flowed southward.The warming was consistent with equatorial forcing of Central California waters via propagation of Kelvin or coastally-trapped waves. The observed change in heat content associated with the 1997–98 El Niño was the same as that observed during the previous seasonal cycle. The warming and freshening events were similar to events observed during the 1957–58 and 1982–83 El Niños.     

Imbalance in the carbonate budget of surficial sediments in the North Atlantic Ocean: variations over the last millenium?

Fluxes contributing to the particulate carbonate system in deep-sea sediments were investigated at the BENGAL site in the Porcupine Abyssal Plain (Northeast Atlantic). Deposition fluxes were estimated using sediment traps at a nominal depth of 3000 m and amounted to 0.37±0.1 mmol C m⁻² d⁻¹. Dissolution of carbonate was determined using flux of total alkalinity from in situ benthic chambers, is 0.4±0.1 mmol C m⁻² d⁻¹. Burial of carbonate was calculated from data on the carbonate content of the sediment and sedimentation rates from a model age based on ¹⁴C dating on foraminifera (0.66±0.1 mmol C m⁻² d⁻¹). Burial plus dissolution was three times larger than particle deposition flux which indicates that steady-state is not achieved in these sediments. Mass balances for other components (BSi, ²¹⁰Pb), and calculations of the focusing factor using ²³⁰Th, show that lateral inputs play only a minor role in this imbalance. Decadal variations of annual particle fluxes are also within the uncertainty of our average. Long-term change in dissolution may contribute to the imbalance, but can not be the main reason because burial alone is greater than the input flux. The observed imbalance is thus the consequence of a large change of carbonate input flux which has occured in the recent past. A box model is used to check the response time of the solid carbonate system in these sediments and the time to reach a new steady-state is in the order of 3 kyr. Thus it is likely that the system has been perturbed recently and that large dissolution and burial rates reflect the previously larger particulate carbonate deposition rates. We estimate that particulate carbonate fluxes have certainly decreased by a factor of at least 3 and that this change has occurred during the last few centuries.     

A New Methodology for Incorporating Tide Gauge Data in Sea Surface Topography Models

As part of the Vertical Offshore Reference Frames (VORF) project sponsored by the U. K. Hydrographic Office, a new model for Sea Surface Topography (SST) around the British Isles has been developed. For offshore areas (greater than 30 km from the coast), this model is largely derived from satellite altimetry. However, its accuracy and level of detail have been enhanced in coastal areas by the inclusion of not only the 60 PSMSL tide gauges with long-term records around the coasts of the United Kingdom and Ireland but also some 385 gauges established at different epochs and for different observation spans by the U. K. Admiralty. All tide gauge data were brought into a common reference frame by a combination of datum models and direct GPS observations, but a more significant challenge was to bring all short-term sea level observations to an unbiased value at a common epoch. This was achieved through developing a spatial-temporal correlation model for the variations in mean sea level around the British Isles, which in turn meant that gauges with long-term observation spans could be used as control points to improve the accuracy of Admiralty gauges. It is demonstrated that the latter can contribute point observations of mean sea level (MSL) with a precision of 0.078 m. A combination of least squares collocation and interpolation was developed to merge the coastal point and offshore gridded data sets, with particular algorithms having to be developed for different configurations of coastal topology. The resulting model of sea surface topography is shown to present a smooth transition from inshore coastal areas to offshore zones. Further benefits of the techniques developed include an enhanced methodology for detecting datum discontinuities at permanent tide gauges.     

Volcanogenic complexes of the Sea of Okhotsk and the Sea of Japan (Comparative analysis)

Several coeval volcanogenic complexes indicating synchronous volcanic events in the Sea of Japan and the Sea of Okhotsk are defined. Volcanics from different-age complexes of the Sea of Okhotsk show many features in common and are attributed to the Pacific type of calc-alkaline series. They were formed in geodynamic settings of the active continental margin and point to its origination on the continental crust of the fragmented Asian continent margin. The volcanic rocks developed in the Sea of Japan reflect different rifting stages. The initial stage was marked by an eruption of calc-alkaline lavas (Paleocene-Eocene complex). At the stage of the marginal-sea spreading, erupted volcanics of the middle Miocene-Pliocene complex were melted from the depleted mantle and magmatism terminated by an eruption of postspreading Pliocene-Holocene volcanics melted from the enriched mantle EM I. Along with the differences, the magmatism in the Sea of Japan and Sea of Okhotsk has some features in common. In both cases, the sialic component of the lithosphere substantially influenced the magma generation.     

Distribution of the Neogene Utsira Sand and the succeeding deposits in the Viking Graben area, North Sea

The sandy quartzose parts of the Utsira Formation, the Middle Miocene to mid Pliocene Utsira Sand, extends north–south along the Viking Graben near the UK/Norwegian median line for more than 450 km and 75–130 km east–west. The Utsira Sand is located in basin-restricted seismic depocentres, east of and below prograding sandy units from the Shetland Platform area with Hutton Sands. The Utsira Sand reaches thicknesses up to ca. 300 m in the southern depocentre and 200 m in the two northern depocentres with sedimentation rates up to 2–4 cm/ka. Succeeding Plio–Pleistocene is divided into seismic units, including Base Upper Pliocene, Shale Drape, Prograding Complex and Pleistocene. The units mainly consist of clay, but locally minor sands occur, especially at toes of prograding clinoforms (bottom-set sands) and in the Pleistocene parts, and the total thickness covering the Utsira Sand is in most places more than 800 m, but thins towards the margins.     

Experimental studies on the slowly varying drift motion of a berthed container ship model

The effects of free-surface waves on the floating structures are of great importance in the offshore industry. Among the six degrees of motions of a surface ship the absence of restoring forces in surge, sway and yaw led to critical situations for moored ships in the recent times. The order of forces in horizontal plane and their exciting frequencies are matters of interest. The resonance with the presence of moored chains led to many accidents in the recent past. The lines in dry conditions may not give good damping and in wet condition they may trigger the system to chaotic motions and jumps. Two different loading conditions of a container ship model are tested with waves in laboratory conditions in two different drafts. The mooring lines are chosen as per scale law and the energy under the response spectrum is determined from the plots. The results give new insights into the movement of a berthed ships subjected to waves. Response of the moored ship to different loading conditions in different water depths are discussed in this paper. The paper gives the order of energy due to first-order and slowly varying movement of a berthed container model in a towing tank.     

Target echo enhancement using a single-element time reversal mirror

Iterative Time Reversal (TR) procedures have been demonstrated to be successful in detecting scatterers even in a highly reverberant environment. The success of the method is attributable to a Time Reversal Mirror (TRM) consisting of an array of transceivers that allows one to reconstruct and reverse-propagate wavefronts of interest. This paper deals with the limiting case of a TRM reduced to a single transceiver, tested using a tank experiment with three scattering objects in free-field conditions. It is shown that it is possible to excite a resonance between the TR operator and the strongest mode of the target in the bandwidth of insonification. A simple free-field scattering model is used to study the mechanisms of convergence and to drive the physics-based analysis of data.