From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.     

Mercury in tissues of mussel off southern California

Total mercury content has been determined in three tissues of the intertidal mussel Mytilus californianus collected at locations along the southern California coast and at island control stations. The apparent influence of certain harbours and municipal wastewater outfalls was reflected by the relatively higher levels of mercury in all tissues of mussels from these areas. In general, the concentrations reported here are lower than those in mussels on west European coasts.     

Sediment deposition from flow at low gradients into a buffer strip—a critical test of re-entrainment theory

The spatial and size distribution of sediment deposited from short periods of overland flow due to the effect of a simulated grass buffer strip was measured for low slopes of 1.6, 3.4 and 5.1%. These data were analysed so as to critically evaluate two alternative models of the process of re-entrainment of recently deposited sediment. A model of re-entrainment, previously thought to be appropriate only for a steady-state or equilibrium situation, was found to give better agreement with experiments than did a model previously used in the literature on this subject.     

Modeling Water and Heat Balance Components for Large Agricultural Region Utilizing Information from Meteorological Satellites

The method has been developed to evaluate water and heat balance components for vegetation covered area of regional scale based on the refined physical-mathematical model of vertical water and heat exchange between land surface and atmosphere (Land Surface Model, LSM) for vegetation season adapted to satellite information on land surface and meteorological conditions. The LSM is accommodated for utilizing satellite-derived estimates of vegetation and meteorological characteristics as model parameters and input variables. Estimates of these characteristics presented as distributions of their values over the study area have been obtained from AVHRR/NOAA, MODIS/EOS Terra and Aqua, SEVIRI/Meteosat-9, -10 data. To build such estimates methods and technologies have been developed and refined using results of thematic processing measurement data from these sensors. Among them the original Multi Threshold Method (MTM) has been developed and tested to calculate daily precipitation sums using rainfall intensity estimates retrieved from AVHRR and SEVIRI data with subsequent replacement of ground-measured rainfall amounts by these daily rainfalls. All technologies have been adapted to the study area with square of 227300 km² being the part of the Central Black Earth Region of European Russia. Developed earlier procedures of utilizing satellitederived estimates of vegetation and meteorological characteristics (including precipitation) in the model have been refined and verified. Final result of modeling is the fields of soil water content, evapotranspiration and other water and heat balance components of the region under study for years 2012–2014 vegetation seasons.     

Effect of atmospheric pressure and temperature on entrapped gas content in peat

Entrapped biogenic gas in peat can greatly affect peatland biogeochemical and hydrological processes by altering volumetric water content, peat buoyancy, and ‘saturated’ hydraulic conductivity, and by generating over‐pressure zones. These over‐pressure zones further affect hydraulic gradients which influence water and nutrient flow direction and rate. The dynamics of entrapped gas are of global interest because the loss of this gas to the atmosphere via ebullition (bubbling) is likely the dominant transport mechanism of methane (CH₄) to the atmosphere from peatlands, which are the largest natural terrestrial source per annum of atmospheric CH₄. We investigated the relationship between atmospheric pressure and temperature on volumetric gas content (VGC) and CH₄ ebullition using a laboratory peat core incubation experiment. Peat cores were incubated at three temperatures (one core at 4 °C, three cores at 11 °C, and one core at 20 °C) in sealed PVC cylinders, instrumented to measure VGC, pore‐water CH₄ concentrations, and ebullition (volume and CH₄ concentrations). Ebullition events primarily occurred (71% of the time) during periods of falling atmospheric pressure. The duration of the drop in atmospheric pressure had a larger control on ebullition volume than the magnitude of the drop. VGC in the 20 °C core increased from the onset of the experiment and reached a fluctuating but time‐averaged constant level between experiment day 30 and 115. The change in VGC was low for the 11 °C cores for the initial period of the experiment but showed large increases when the growth chamber temperature increased to 20 °C due to a malfunction. The core maintained at 4 °C showed only a small increase in entrapped gas content throughout the experiment. The 20 °C core showed the largest increase in VGC. The increases in VGC occurred despite pore‐water concentrations of CH₄ being below the equilibrium solubility level. Copyright © 2009 John Wiley & Sons, Ltd.     

Sediment transport at the network scale and its link to channel morphology in the braided Vjosa River system

In this article we apply the CASCADE network-scale sediment connectivity model to the Vjosa River in Albania. The Vjosa is one of the last unimpaired braided rivers in Europe and, at the same time, a data scarce environment, which limits our ability to model how this pristine river might respond to future human disturbance. To initialize the model, we use remotely sensed data and modeled hydrology from a regional model. We perform a reach-by-reach optimization of surface grain size distribution (GSD) and bedload transport capacity to ensure equilibrium conditions throughout the network. In order to account for the various sources of uncertainty in the calculation of transport capacity, we performed a global sensitivity analysis. The modeled GSD distributions generated by the sensitivity analysis generally match the six GSDs measured at different locations within the network. The modeled bedload sediment fluxes increase systematically downstream, and annual fluxes at the outlet of the Vjosa are well within an order of magnitude of fluxes derived from previous estimates of the annual suspended sediment load. We then use the modeled sediment fluxes as input to a set of theoretically derived functions that successfully discriminate between multi-thread and single-thread channel patterns. This finding provides additional validation of the model results by showing a clear connection between modeled sediment concentrations and observed river morphology. Finally, we observe that a reduction in sediment flux of about 50% (e.g., due to dams) would likely cause existing braided reaches to shift toward single thread morphology. The proposed method is widely applicable and opens a new avenue for application of network-scale sediment models that aid in the exploration of river stability to changes in water and sediment fluxes.     

Transitional basalts of alkaline or tholeiitic affinity in the somali trap series (southeastern margin of the main Ethiopian rift from 8° 10′ to 8° 70′ Lat. N)

The Trap Series outcropping in the southeastern margin of the Main Ethiopian Rift has a total thickness of not less than 500–600 m. In this series, mainly composed of flood lavas and rare scoriaceous beds, basaltic rocks — which on a serial viewpoint are transitional basalts — are the best represented. Alkali-olivine basalts (with modal and normative nepheline) are interbedded within the lower and middle members of the series, while in the upper members andesine basalts and dark phonolitic tephrites are present. Among the transitional basalts, rocks of alkaline and of tholeiitic affinity are present as shown by petrographic and chemical analyses. On the basis of petrochemical and geovolcanological data, it is probable that these rocks and the phonolitic-tephrites originated from different primary magmas.     

Elastic constants computed for a medium composed of this anisotropic layers

Summary The problem of the elastic properties of a medium composed of thin anisotropic layers is treated. The study is based on the conditions of stress and strain and on Hooke's Law under the assumption of close contact between the layers. The algorithm described is suitable for a computer.Dedicated to RNDr. Jan Pícha, CSc., on his 60th Birthday