Airside velocity measurements over the wind-sheared water surface using particle image velocimetry

An experimental investigation of the airflow structure in the near surface region over the wind-sheared air–water interface is reported. The two-dimensional velocity fields in a plane perpendicular to the water surface were measured using particle image velocimetry (PIV) technique over a wind speed range from 1.5 to 4.4 m s⁻¹. The results show a reduction in the mean velocity magnitudes and the tangential stresses when gravity waves appear on the surface. An enhanced vorticity layer was observed immediately above the water surface that extended to a height of approximately 2 cm. The vorticity was enhanced by an order of magnitude, and the energy dissipation rate was enhanced by a factor of 7 in this layer at all wind speeds. The vertical profiles of Reynolds stress, energy production, and dissipation indicate the contribution of surface waves in the enhanced transfer of momentum and energy between the two fluids. The results in this study show that the flow dynamics in a layer immediately adjacent to the water surface whose thickness is of the order of the significant wave height is significantly different from that at greater heights. Thus, it is concluded that the quantitative investigation of the flow in the immediate vicinity of the interface is vital for an improved understanding of the heat, mass, and momentum exchange between air and water. The present study demonstrates that PIV is an effective technique to accurately measure the velocity fields in this region.     

Probabilistic aftershock hazard assessment II: application of strong ground motion simulations

Probabilistic aftershock hazard assessment (PAHA) has been introduced by Wiemer (Geophys Res Lett 27:3405–3408, 2000). The method, in its original form, utilizes attenuation relations in evaluating peak ground velocity (PGV) exceedence probability. We substitute the attenuation relations together with their uncertainties by strong ground motion simulations for a set of scenarios. The main advantage of such an approach is that the simulations account for specific details of the aftershock source effects (faulting style, slip distribution, position of the nucleation point, etc.). Mean PGVs and their standard deviations are retrieved from the simulation results obtained by the new hybrid k-squared source model, and they are used for the PAHA analysis at a station under study. The model chosen for the testing purposes is inspired by the Izmit A25 aftershock (M _w  = 5.8) that occurred 26 days after the mainshock. The PAHA maps are compared with (1) those obtained by the use of attenuation relations and (2) the peak values of ten selected strong-motion recordings written by the aftershock at epicentral distances <50 km. We conclude that, although the overall hazard decay with increasing fault distance is similar, the PAHA maps obtained by the use of simulations exhibit remanent radiation pattern effect and prolongation in the strike direction due to the directivity effect pronounced for some of the scenarios. As regard the comparison with real data, we conclude that the PAHA maps agree with observed peak values due to appropriate attenuation model adopted in the analysis.     

Truncation of the distribution of ground-motion residuals

Recent studies to assess very long-term seismic hazard in the USA and in Europe have highlighted the importance of the upper tail of the ground-motion distribution at the very low annual frequencies of exceedance required by these projects. In particular, the use of an unbounded lognormal distribution to represent the aleatory variability of ground motions leads to very high and potentially unphysical estimates of the expected level of shaking. Current practice in seismic hazard analysis consists of truncating the ground-motion distribution at a fixed number (ε _max) of standard deviations (σ). However, there is a general lack of consensus regarding the truncation level to adopt. This paper investigates whether a physical basis for choosing ε _max can be found, by examining records with large positive residuals from the dataset used to derive one of the ground-motion models of the Next Generation Attenuation (NGA) project. In particular, interpretations of the selected records in terms of causative physical mechanisms are reviewed. This leads to the conclusion that even in well-documented cases, it is not possible to establish a robust correlation between specific physical mechanisms and large values of the residuals, and thus obtain direct physical constraints on ε _max. Alternative approaches based on absolute levels of ground motion and numerical simulations are discussed. However, the choice of ε _max is likely to remain a matter of judgment for the foreseeable future, in view of the large epistemic uncertainties associated with these alternatives. Additional issues arise from the coupling between ε _max and σ, which causes the truncation level in terms of absolute ground motion to be dependent on the predictive equation used. Furthermore, the absolute truncation level implied by ε _max will also be affected if σ is reduced significantly. These factors contribute to rendering a truncation scheme based on a single ε _max value impractical.     

Effect of urbanization on runoff characteristics of the On-Cheon Stream watershed in Pusan,Korea

This study investigated the effect of urbanization on runoff from the On-Cheon Stream watershed in Pusan, Korea. This watershed has been experiencing considerable urbanization since the 1960s. There are two gauging stations in the watershed. For one of the stations there are recent flow data and for the other flow data were observed in the past. A linear reservoir model was chosen and runoff was analysed for several flood events. The linear reservoir model has been found to generate flood hydrographs accurately for both gauging stations, and its applicability to the study area has also been established. Using two methods of computing effective rainfall or rainfall excess (ϕ-index and constant percentage method), the results of runoff analyses were investigated. The ϕ-index method yielded better results than the constant percentage method. A comparison of hydrographs observed in the past with the simulation results at the Ie-Sup bridge site revealed that the peak discharge increased and the mean lag time of the study area decreased owing to urbanization over the past two decades. It is also possible to evaluate the effect of urbanization quantitatively. © 1998 John Wiley & Sons, Ltd.     

Simulation of the direct runoff hydrograph at basin outlet

A simple model describing the transformation of effective rainfall to direct runoff through the overland flow mechanism is presented. The model is based on the classical representation of a watershed by a combination of planes and channels. The dynamics of overland flow in each plane is simulated by the non-linear kinematic wave, but the outflow from a given plane is concentrated in the middle of the corresponding drainage channel. The water routing in the channels is carried out by a piece-wise linearized formulation in space of the kinematic wave approximation. Using synthetic events on 10 watersheds, the model was tested by comparing it with results obtained by applying the non-linear kinematic wave to all the elements of the watershed. The model was found to be adequate, even in a form that simplifies the geometric features of the planes through an averaging procedure based on the Horton–Strahler ordering scheme of the watershed. © 1998 John Wiley & Sons, Ltd.     

Distribution functions of spring discharges according to their lithologies and the influence of lower limit to flow: an example from Spain

Specific functions of distribution of the number of springs and of their contributions according to flow for each of nine lithological groups are established. These functions confirm the suitability of a general type of distribution (Sanz 1996), which is a borderline case of the lognormal distribution. The statistical methods proposed for the lithological types presented can be applied to any region if data on flow and lithology of the aquifers drained by springs are available. These methods have been applied to Spain, a representative region with varied geology, climate and topography; 71.2% of spring flow is supplied by limestones, 19.17% by alluvial sediments and marls, 6.7% by conglomerates and sandstones, and 3% by slates, plutonic rocks, quartzites, and other groups. Springs with discharge rates exceeding 2000 L/s exist only in limestones. The majority of springs with low flow occur in marls. If we consider springs with flow greater than 0.5 L/s, alluvial sediments, sandstones, marls, and limestones have the greatest density of springs per surface area, although the average flow varies greatly from one lithology to the next. The cumulative estimated discharge and the estimated number of springs depend upon the definition of the lower limit of flow. For example, total discharge is reduced by 30% if we eliminate all springs with flow lower than 0.5 L/min.     

Transport of three herbicides in ground water at Twin Lake test site,Chalk River,Ontario, Canada

A field tracer test performed under natural flow conditions at the Twin Lake test site, Chalk River Laboratories of the Atomic Energy of Canada Ltd. in Chalk River, Ontario, Canada, using tritium and three herbicides (Chlortoluron, Terbuthylazine, and Pendimethalin) was interpreted using the dispersion equation with a combined reaction model. The reaction model couples an instantaneous equilibrium reaction governed by a linear adsorption isotherm with a reversible or irreversible kinetic reaction of the first order, and decay. An improved interpretation method consists of a simultaneous fitting of theoretical concentration and mass-recovery curves to the experimental data, which leads to a more reliable determining of reaction models and improves the accuracy of fitting. Tritium served as the reference tracer to determine the flow velocity, dispersivity, and the recovery of the herbicides. Chlortoluron was slightly delayed by equilibrium exchange with strongly reduced concentration due to an irreversible kinetic reaction and/or decay. Terbuthilazine was slightly delayed by equilibrium exchange, with strongly reduced concentration due to a reversible kinetic reaction with some influence of decay. A strong equilibrium reaction and a strong reversible kinetic reaction without degradation governed the transport of Pendimethalin, reducing considerably its concentration. The results obtained show that simulations based only on Kd and decay constant, especially if these parameters are found in the laboratory, may considerably differ from those performed with reaction parameters determined in properly performed field tests. The dominant reaction types, and the values of parameters found in the study, supply useful information on the transport of the investigated herbicides in sandy aquifers under natural flow conditions.     

A data‐based mechanistic modelling (DBM) approach to understanding dynamic sediment transmission through Wyresdale Park Reservoir,Lancashire, UK

This paper outlines the application of a new data‐based mechanistic (DBM) modelling methodology to the characterization of the sediment transmission dynamics in a small upland reservoir, Wyresdale Park, Lancashire. The DBM modelling strategy exploits advanced statistical procedures to infer the dynamic model structure and its associated parameters directly from the instrumented data, producing a parametrically efficient, continuous time, transfer function model which relates suspended sediment load at the reservoir inflow to the outflow at the event scale. The associated differential equation model parameters have physical attributes which can be interpreted in terms of sediment transmission processes and associated reservoir trap efficiency. Sedigraph analysis suggests that wind‐induced resuspension episodically supplies an additional load to the reservoir outlet. The stochastic nature of the DBM model makes it ideal for evaluating the effects of uncertainty through Monte Carlo simulations (MCS) for discharge and sediment transmission. Copyright © 2000 John Wiley & Sons, Ltd.     

Kontamination mit coliformen Keimen durch Insektenlarven bei der Aufbereitung von Trinkwasser

Contamination of Drinking Water with Coliform Organisms by the Larves of Gnats in the Water Treatment Plant E. coli and coliform organisms are used to judge the microbial quality of drinking water. The presence of these organisms in water indicates that there is a risk for faecal oral transmitted pathogen organisms. E. coli shows the faecal contamination of men and warm blooded animals (mammalian and birds), coliform organisms may be excreted as well from cold blooded animals. The cold blooded animals normally don’t excrete pathogen organisms relevant for human beings. So coliform organisms don’t have such a high relevance for drinking water microbiology. In this paper an incident is presented with a contamination of drinking water with coliform organisms in the treatment plant by the larves of gnats. The larves of the gnats crawl into the treatment chamber via entrance for ventilation. The larves were kept back on the surface of the filters but they contaminated the water with coliform organisms.