The influence of aerosol particle composition on cloud droplet formation

A difference in partitioning between cloud droplets and interstitial air for two chemical species (elemental carbon and sulphur) with different expected behaviour in nucleation scavenging was observed in clouds at Mt. Kleiner Feldberg (825 m asl), near Frankfurt, Germany. The fraction of sulphur incorporated in cloud droplets was always higher than the fraction of elemental carbon. This difference in partitioning has also been observed in fog but under different pollution conditions in the Po Valley, Italy. Both these studies were based on bulk samples. In the present study at Kleiner Feldberg, impactor samples of the particles in the interstitial air and the cloud droplet residuals were taken and a single particle analysis was done on the samples. It was found that, for a given particle size, the majority of particles forming cloud droplets were soluble and that insoluble particles preferentially remained in the interstitial air.     

A Statistical Framework for Calculating and Assessing Compositional Linear Trends Within Fault Zones: A Case Study of the NE Block of the Clark Segment,San Jacinto Fault,California, USA

Utilizing chemical data derived from the various fault zone architectural components of the Clark strand of the San Jacinto fault, southern California, USA, we apply for the first time non-central principal component analysis to calculate a compositional linear trend within molar A–CN–K space. In this procedure A–CN–K are calculated as the molar proportions of Al₂O₃ (A), CaO* + Na₂O (CN), and K₂O (K) in the sum of molar Al₂O₃, Na₂O, CaO*, and K₂O. CaO* is the molar CaO after correction for apatite. We then derive translational invariant chemical alteration intensity factors, t, for each architectural component through orthogonal projection of analyzed samples onto the compositional linear trend. The chemical alteration intensity factor t determines the relative change in composition compared to the original state (i.e., the composition of the altered wall rocks). It is dependent on the degree of intensity to which the process or processes responsible for the change in composition of each architectural component has been active. These processes include shearing, fragmentation, fluid flow, and generation of frictional heat. Non-central principal component analysis indicates that principal component 1 explains 99.7 % of the spread of A–CN–K data about the calculated compositional linear trend (i.e., the variance). The significance level for the overall one-way analysis of variance (ANOVA) is 0.0001. Such a result indicates that at least one significant difference across the group of means of t values is different at the 95 % confidence level. Following completion of the overall one-way ANOVA, the difference in means t test indicated that the mean of the t values for the fault core are different than the means obtained from the transition and damage zones. In contrast, at the 95 % confidence level, the means of the t values for the transition and damage zones are not statistically distinguishable. The results of XRD work completed during this study revealed that the <2 µm fraction is composed primarily of illite/smectite with ~15 % illite in the damage zone, of illite/smectite with ~30 % illite in the transition zone, and of discreet illite with very minor smectite in the fault core. These changes parallel the increasing values of the chemical alteration intensity factors (i.e., t). Based on the above results, it is speculated that when fault zones are derived from tonalitic wall rocks at depths of ~400 ± 100 m, the onset of the illite/smectite to illite conversion will occur when t values exceed 0.20 ± 0.12, the average chemical alteration intensity factor calculated for the transition zone. Under such conditions during repeated rupturing events, frictional heat is produced and acidic fluids with elevated temperatures (≥ ~125 °C) are flushed through the fault core. Over time, the combination of shearing, fragmentation, and frictionally elevated temperatures eventually overcomes the kinetic barrier for the illite/smectite to illite transition. Such settings and processes are unique to fault zones, and as a result, they represent an underappreciated setting for the development of illite from illite/smectite. The success of non-central principal component analysis in this environment offers the first statistically rigorous methodology for establishing the existence of compositional linear trends in fault zones. This method also derives quantifiable alteration intensity factors that could potentially be used to compare the intensity of alteration at different segments of a fault, as well as offer a foundation to interpret the potential driving forces for said alteration and differences therein.     

An Open,Object-Based Framework for Generating Anisotropy in Sedimentary Subsurface Models

The spatial distribution of hydraulic properties in the subsurface controls groundwater flow and solute transport. However, many approaches to modeling these distributions do not produce geologically realistic results and/or do not model the anisotropy of hydraulic conductivity caused by bedding structures in sedimentary deposits. We have developed a flexible object-based package for simulating hydraulic properties in the subsurface—the Hydrogeological Virtual Realities (HyVR) simulation package. This implements a hierarchical modeling framework that takes into account geological rules about stratigraphic bounding surfaces and the geometry of specific sedimentary structures to generate realistic aquifer models, including full hydraulic-conductivity tensors. The HyVR simulation package can create outputs suitable for standard groundwater modeling tools (e.g., MODFLOW), is written in Python, an open-source programming language, and is openly available at an online repository. This paper presents an overview of the underlying modeling principles and computational methods, as well as an example simulation based on the Macrodispersion Experiment site in Columbus, Mississippi. Our simulation package can currently simulate porous media that mimic geological conceptual models in fluvial depositional environments, and that include fine-scale heterogeneity in distributed hydraulic parameter fields. The simulation results allow qualitative geological conceptual models to be converted into digital subsurface models that can be used in quantitative numerical flow-and-transport simulations, with the aim of improving our understanding of the influence of geological realism on groundwater flow and solute transport.     

Analysis of radial movement of an unconfined leaky aquifer due to well pumping and injection

Radial movement of an unconfined leaky aquifer was studied with respect to hydraulic forces that are induced by well recharge and discharge. New analytic solutions in the velocity and displacement fields were found and applied to describe transient movement in an unconfined leaky aquifer. Linear momentum and mass balance of saturated porous sediments, the Darcy-Gersevanov law, and the analytic solution of hydraulic drawdown for unsteady flow within the unconfined leaky aquifer were introduced to find the new solutions. Analytic results indicate that the nonlinear relation between the initial hydraulic head (h₀) and the well function has an insignificant effect on the aquifer transient movement when the drawdown s<0.02h ₀. When the well function is simplified with different assumptions and pumping conditions, the new solutions correspondingly reduce to cases that are similar to the Hantush-Jacob, Muskat, and Theis transient movement of a confined leaky aquifer. It was found that large leakance is important in slowing radial movement and reducing aquifer deformation. Flow velocity in the aquifer is more responsive to leakance than to cumulative displacement within the aquifer. The zones and boundary with tensile stress can be located using the same approach applied to a confined aquifer for risk assessment of earth fissuring.

---

Résumé Le mouvement radial dans un aquifère semi-perméable libre a été étudié en considérant les forces hydrauliques induites par la recharge et le prélèvement au niveau d’un puits. De nouvelles solutions analytiques des champs de vitesse et de déplacement ont été trouvées et appliquées pour décrire le mouvement transitoire dans un aquifère semi-perméable libre. Pour trouver les nouvelles solutions, le moment linéaire et le bilan de masse dans les sédiments poreux saturés, la loi de Darcy-Gersevanov, et la solution analytique du rabattement hydraulique pour un écoulement transitoire dans un aquifère semi-perméable libre sont pris en compte. Les résultats analytiques montrent que la relation non-linéaire entre le potentiel hydraulique initial (h₀) et la fonction de puits a un effet insignifiant sur le mouvement transitoire de l’aquifère quand le rabattements s <0.02h₀. Si la fonction de puits est simplifiée en tenant compte de différentes hypothèses et conditions de pompage, les nouvelles solutions se réduisent en conséquence à des cas similaires au mouvement transitoire dans un aquifère semi-perméable captif selon Hantush-Jacob, Muskat, et Theis. Il s’est avéré qu’une drainance élevée est importante pour le ralentissement du mouvement radial et la réduction de la déformation de l’aquifère. La vitesse d’écoulement dans l’aquifère est plus sensible à la drainance qu’au déplacement cumulé dans l’aquifère. Les zones et la frontière présentant des contraintes de traction peuvent être localisées en utilisant la même approche appliquée à un aquifère captif pour l’évaluation des risques de fissuration du sol.

---

Resumen Se ha estudiado el movimiento radial en un acuífero no confinado con fuga en relación a las fuerzas hidráulicas que son inducidas por la descarga y recarga del pozo. Se encontraron nuevas soluciones analíticas en los campos de desplazamiento y velocidad, las cuales se aplicaron para describir el movimiento transitorio en un acuífero no confinado con fuga. Se han introducido cálculos de balance de masa y momentum lineal de los sedimentos porosos saturados, la Ley Darcy-Gersevanov, y la solución analítica de descenso hidráulico para flujo sin régimen permanente dentro del acuífero no confinado con goteo para encontrar las nuevas soluciones. Los resultados analíticos indican que la relación no lineal entre la presión hidráulica inicial (h₀) y la función del pozo tiene efecto insignificante en el movimiento transitorio del acuífero cuando el descenso s < 0.02h₀. Cuando se simplifica la función del pozo en base a diferentes supuestos y condiciones de bombeo se reducen las nuevas soluciones a casos que son similares a el movimiento transitorio Hantush-Jacob, Muskat, y Theis de un acuífero confinado con goteo. Se encontró que las fugas grandes son importantes en la disminución del movimiento radial y en la reducción de la deformación del acuífero. La velocidad de flujo en el acuífero responde más a las fugas que al desplazamiento acumulativo dentro del acuífero. Pueden localizarse zonas y límites con esfuerzos tensionales usando el mismo enfoque aplicado a acuíferos confinados para evaluación de riesgo de generación de fracturas en el terreno.

---

     

NEW OBSERVATIONS ON THE MEIOTIC PROCESS IN THE MARINE DINOFLAGELLATE NOCTILUCA SCINTILIANS （NOCTILUCALES, DINOPHYCEAE）

The meiotic process in Noctiluca scintillans were observed under light microscope.Some abnormal cell divisions, incompletely separated “zoospores” and the changes of the zoospores are described in this paper. Together with the fmdings of field samplings and the previous results by other researchers, the process of meiosis in N. scintillans was supposed to be a pathway to reduce the extra high density of NH3-N within the cell in order to ensure normal population growth.     

Middle Campanian–lowermost Maastrichtian nannofossil and foraminiferal biostratigraphy of the northwestern Australian margin

The middle–late Campanian was marked by an increase in the bioprovinciality of calcareous microfossil assemblages into distinct Tethyan, Transitional, and Austral Provinces that persisted to the end of the Maastrichtian. The northwestern Australian margin belonged to the Transitional Province and the absence of key Tethyan marker species such as Radotruncana calcarata and Gansserina gansseri has led petroleum companies operating in the area to use the locally developed KCCM integrated calcareous microfossil zonation scheme. The KCCM zonation is a composite scheme comprising calcareous nannofossil (KCN), planktonic foraminiferal (KPF) and benthonic foraminiferal (KBF) zones. This paper presents the definitions and revisions of Zones KCCM8–19, from the highest occurrence (HO) of Aspidolithus parcus constrictus to the lowest occurrence (LO) of Ceratolithoides aculeus, and builds on our previous early–late Maastrichtian study. The presence of a middle–upper Campanian disconformity is confirmed by microfossil evidence from the Vulcan Sub-basin, Exmouth and Wombat plateaus, and the Southern Carnarvon Platform. In the Vulcan Sub-basin and on the Exmouth Plateau (ODP Hole 762C) the hiatus extends from slightly above the LO of common Rugoglobigerina rugosa to above the LO of Quadrum gothicum. On the Wombat Plateau (ODP Hole 761B) it spans from above the LO of Heterohelix semicostata to above the LO of Quadrum gothicum; and in the Southern Carnarvon Platform the disconformity has its longest duration from above the HO of Heterohelix semicostata to above the LO of Quadrum sissinghii. A significant revision of the events which define Zones KCCM18 and 19 was necessary owing to the observation that the LO of Ceratolithoides aculeus occurs below the HOs of Archaeoglobigerina cretacea and Stensioeina granulata incondita and the LO of common Rugoglobigerina rugosa. In the original zonation these events were considered to be coincident.     

Spatial and multivariate analysis of geochemical data from metavolcanic rocks in the Ben Nevis area, Ontario

A study of the lithogeochemistry of metavolcanics in the Ben Nevis area of Ontario, Canada has shown that factor analysis methods can distinguish lithogeochemical trends related to different geological processes, most notably, the principal compositional variation related to the volcanic stratigraphy and zones of carbonate alteration associated with the presence of sulphides and gold. Auto- and cross-correlation functions have been estimated for the two-dimensional distribution of various elements in the area. These functions allow computation of spatial factors in which patterns of multivariate relationships are dependent upon the spatial auto- and cross-correlation of the components. Because of the anisotropy of primary compositions of the volcanics, some spatial factor patterns are difficult to interpret. Isotropically distributed variables such as CO ₂ are delineated clearly in spatial factor maps. For anisotropically distributed variables (SiO ₂ ), as the neighborhood becomes smaller, the spacial factor maps becomes better. Interpretation of spatial factors requires computation of the corresponding amplitude vectors from the eigenvalue solution. This vector reflects relative amplitudes by which the variables follow the spatial factors. Instability of some eigenvalue solutions requires that caution be used in interpreting the resulting factor patterns. A measure of the predictive power of the spatial factors can be determined from autocorrelation coefficients and squared multiple correlation coefficients that indicate which variables are significant in any given factor. The spatial factor approach utilizes spatial relationships of variables in conjunction with systematic variation of variables representing geological processes. This approach can yield potential exploration targets based on the spatial continuity of alteration haloes that reflect mineralization.List of symbols c _i Scalar factor that minimizes the discrepancy between andU _i - D Radius of circular neighborhood used for estimating auto- and cross-correlation coefficients - d Distance for which transition matrixU is estimated - d _ij Distance between observed valuesi andj - E Expected value - E _i Row vector of residuals in the standardized model - F(d _ij) Quadratic function of distanced _ij F(d _ij)=a+bd _ij+cd _ij ² - L Diagonal matrix of the eigenvalues ofU - _i Eigenvalue of the matrixU;ith diagonal element ofL - N Number of observations - p Number of variables - Q Total predictive power ofU - R Correlation matrix of the variables - R _0j Variance-covariance signal matrix of the standardized variables at origin;j is the index related tod andD (e.g.,j=1 ford=500 m,D=1000 m) - R _1j Matrix of auto- and cross-correlation coefficients evaluated at a given distance within the neighborhood - R _m ² Multiple correlation coefficient squared for themth variable - S _i Column vectori of the signal values - s _k ² Residual variance for variablek - T _i Amplitude vector corresponding toV _i;ith row ofT=V ^–1 - T Total variation in the system - U Nonsymmetric transition matrix formed by post-multiplyingR ₀₁ ^–1 byR _ij - U _i Componenti of the matrixU, corresponding to theith eigenvectorV _i;U _i= _iV_iT_i - U* _i ComponentU _i multiplied byc _i - U _ij Sum of componentsU _i+U _j - V _i Eigenvector of the matrixU;ith column ofV withUV=VL - w Weighting factor; equal to the ratio of two eigenvalues - X _i Random variable at pointi - x _i Value of random variable at pointi - y _i Residual ofx _i - Z _i Row vectori for the standardized variables - z _i Standardized value of variable     

HUBEX强化观测期雷达测雨在水文过程模拟中的应用(英)

选择全球能量与水循环亚洲季风试验区的淮河黄泥庄水文站控制的史河流域(805 km2)为研究区域,基于数字高程模型,生成栅格水流流向,构建数字流域及空间拓扑关系;然后,将阜阳雷达观测数据经过订正校准后作为研究区内每一栅格单元上的雨量输入,并在每一栅格上应用新安江模型构建产流模型;再根据每一栅格至流域出口断面-黄泥庄水文站的距离,运用Muskingum方法进行汇流演算,从而获得黄泥庄站的流量过程。计算结果显示,从1998年5月31日-8月3日的强化观测期内模型确定性系数为92.41％,其间4场洪水的确定性系数分别为85.64％、86.62％、92.57％和83.91％,高于应用地面雨量计观测的数据计算的结果。这说明雷达测雨数据具有较高的时空分辨率,当它应用于水文过程模拟时优于地面雨量计资料,基于栅格的水文模型为充分利用雷达数据提供了良好平台。     

Exploration geochemistry—Distribution of elements and recognition of anomalies

The exploration geochemist faces a serious problem in reconciling theoretical statistics with the empirical distribution of elements in materials in the earth's crust. The results of computer-simulation experiments being conducted by the Exploration Geochemistry Group at the University of New Brunswick illustrate some of the problems of the relation between frequency distributions and spatial distributions of elements and raise some interesting questions about sampling patterns and physical size of samples. Most importantly, the simulation experiments and empirical examples support the contention that attempts to make an assumption of normality more efficient by performing log transformations on positively skewed data may defeat the purpose of statistical analysis for exploration work. New developments in computer-data presentation and interpretation, including population sorting and classification, illustrate the increasing use of the computer in exploration geochemistry.     

Skolithos pipes as strain markers in mylonites

It is argued that mylonite zones result from translatory movements between rock masses and that the deformation mechanism is one of simple shear. Evidence is adduced to show that the mylonite zones in the Moine Thrust Belt of northwestern Scotland were developed in association with the inverted limbs of early Caledonian folds which trend parallel to the thrust front. On this basis a method is developed for the determination of shear strain from parameters which can be measured in mylonites which contain deformed Skolithos worm burrows. Very large strains are indicated (γ - 10). Some general implications are discussed.