Paleoflood events recorded by speleothems in caves

Speleothems are usually composed of thin layers of calcite (or aragonite). However, cemented detrital materials interlayered between laminae of speleothemic carbonate have been also observed in many caves. Flowstones comprising discontinuous carbonate layers form due to flowing water films, while flood events introduce fluviokarstic sediments in caves that, on occasion, are recorded as clayey layers inside flowstones and stalagmites. This record provides a potential means of understanding the frequency of palaeofloods using cave records. In this work, we investigate the origin of this type of detrital deposit in El Soplao Cave (Northern Spain). The age of the lowest aragonite layer of a flowstone reveals that the earliest flood period occurred before 500 ka, though most of the flowstone formed between 422 +69/‐43 ka and 400 +66/‐42 ka. This suggests that the cave was periodically affected by palaeoflood events that introduced detrital sediments from the surface as a result of occasional extreme rainfall events, especially at around 400 ka. The mineralogical data enable an evolutionary model for this flowstone to be generated based on the alternation of flood events with laminar flows and carbonate layers precipitation that can be extrapolated to other caves in which detrital sediments inside speleothems have been found. Copyright © 2014 John Wiley & Sons, Ltd.     

Assessment of evaporation and water fluxes in a column of dry saline soil subject to different water table levels

Dry saline soils are common in the arid and hyper‐arid basins located in the Chilean Altiplano, where evaporation from shallow groundwater is typically the major component of the water balance. Thus, a good understanding of evaporation processes is necessary for improving water resource planning and management in these regions. In this study, we conducted laboratory experiments with a natural saline soil column to estimate evaporation rates and assess the liquid and water vapor fluxes under different water table levels. Water content, electrical conductivity and temperature at different depths were utilized to assess the liquid and water vapor fluxes in the soil column. We observed movement of water that dissolves salts from the soil and transports them to areas in the column where they accumulate. Isothermal liquid flux was predominant, while thermal and isothermal liquid and thermal water vapor fluxes were negligible, except for deep water table levels where isothermal and thermal water vapor fluxes had similar magnitude but opposite directions. Differences observed in total fluxes for all water table levels were due to different upward and downward fluxes, which depend on changes in water content and temperature within the soil profile. Both the vapor flux magnitude and direction were found to be very sensitive to the choice of empirical parameters used in flux quantification, such as tortuosity and the enhancement factor for local temperature gradients in the air phase within the column. Copyright © 2013 John Wiley & Sons, Ltd.     

A New Method for Determining Compound Specific Carbon Isotope of Chlorinated Solvents in Porewater

A new method for the extraction of chlorinated solvents (CSs) from porewater with dimethylacetamide (DMA) used as a solvent and the determination of δ¹³C by gas chromatography-isotope ratio mass spectrometry (GC-IRMS) with solid-phase microextraction (SPME) are presented. This method was used for the determination of δ¹³C of chloroethenes and chloromethanes. The extraction of the CSs from porewater with DMA led to a minimal loss of mass of solvent and chlorinated compounds. The accuracy of the method was verified with the analysis of the pure injected compounds using elemental analyzer—isotope ratio mass spectrometry (EA-IRMS). It has been effectively applied in a study area in saturated soil samples of a pollutant source zone of perchloroethylene (PCE) and trichloroethylene (TCE). The limit of quantification of the new method was 0.034 μg/g for PCE and TCE for 10–20 g of soil sample. This new method allows for compound-specific isotope analysis of CSs in porewater, which can be beneficial in sites where the identification of contamination sources and the behavior of the contaminants are not clear.     

Medium-term responses of rocky bottoms to sewage discharges from a deepwater outfall in the NE Atlantic

An investigation on the effects of deepwater outfall discharges on the status of rocky reef communities was carried out. The sanitation system was found to be an environmentally suitable option for the protection of those habitats situated in high energy coastal environments. Sediments occurring between the predominating rocky substrates showed low values of the fine fraction (<63microm) and organic matter content. In addition, high average concentrations of Cd, Hg and Zn were found in these sediments, though these values were similar to those registered in non-affected sites, far away from the outfall. On the other hand, those assemblages typical of hard substrates that settled near the outfall showed an increase in total richness and abundance of macroinvertebrates. Moreover, the average number of species of each taxonomic group, a good indicator of the maintenance of the previous trophic structure, only varied considerably over time at the rip-rap protection. In a global context, those changes were not directly related to the discharge disturbances, but to the natural variability or the successional processes occurring within those communities. Only communities dwelling in the rip-rap protection area were affected by the proximity of the discharges.     

Some Insights into Topographic,Elastic and Self-gravitation Interaction in Modelling Ground Deformation and Gravity Changes in Active Volcanic Areas

Surface displacements and gravity changes due to volcanic sources are influenced by medium properties. We investigate topographic, elastic and self-gravitation interaction in order to outline the major factors that are significant in data modelling. While elastic-gravitational models can provide a suitable approximation to problems of volcanic loading in areas where topographic relief is negligible, for prominent volcanoes the rough topography could affect deformation and gravity changes to a greater extent than self-gravitation. This fact requires the selection, depending on local relief, of a suitable model for use in the interpretation of surface precursors of volcanic activity. We use the three-dimensional Indirect Boundary Element Method to examine the effects of topography on deformation and gravity changes in models of magma chamber inflation/deflation. Topography has a significant effect on predicted surface deformation and gravity changes. Both the magnitude and pattern of the geodetic signals are significantly different compared to half-space solutions. Thus, failure to account for topographic effects in areas of prominent relief can bias the estimate of volcanic source parameters, since the magnitude and pattern of deformation and gravity changes depend on such effects.     

Analysis of Physical and Chemical Parameters for Discrimination of Water Origin in a Hydroelectric Reservoir

Seventeen physical and chemical parameters were obtained from a hydroelectric reservoir located in a tropical region in the south of Brazil. Multivariate Principal Component Analysis (PCA) and Hierarchical Group Analysis (HGA) were used to identify the parameters discriminating the origin of water from the Tibagi and the Primeiro de Maio River, after it has passed the mixing region. The study was conducted during the dry and rainy seasons in July 2002 and February 2003 at three depths and three sampling sites located 0, 5, and 10 km away from the mixing region. The statistical methods showed to be appropriate for identifying the contribution of each tributary in the water mixing site of a complex water system. The most important discriminating parameter was the absorbance relation A(253 nm)/A(203 nm), followed by the concentrations of Fe(III), Mn(III), and Ni(II). An anthropogenic interference was found in the reservoir due to high Ni(II) and orthophosphate concentrations caused by a nearby town sewage discharge. The interference was more important during the dry periods due to the lower dispersion of the pollutants. Urgent initiatives should be taken from the state government to build treatment stations for the wastewater of the small cities around the Capivara hydroelectric reservoir to prevent the drinking water quality from deteriorating.     

Entropy‐based equation to assess hillslope sediment production

A new equation to assess hillslope sediment production, based on physical and probabilistic approaches, is presented. The equation, which allows the computation of the delivery ratio for every event, considers the physical variables of travel distance, stream power, settling velocity and gross erosion. The probability density function that arises from the new formulation is solved using the principle of maximum entropy. Based on data from five watersheds in both tropical and temperate zones, the new delivery parameter K_v is calibrated and associated with vegetation cover and conservation practice. The proposed equation is rationally based in relation to parameter K_v. The entropy‐based equation was applied to assess sediment yield in two other experimental watersheds, showing good predictability for the set (mean absolute error of 20·8%). No systematic error was found in the analysed data. The entropy‐based equation showed good predictability for long‐term sets of data and for high‐erosivity events, but did not perform well for the low‐erosivity ones. Copyright © 2007 John Wiley & Sons, Ltd.     

Occurrence and Resistance of Pathogenic Bacteria Along the Tietê River Downstream of São Paulo in Brazil

The load of pathogenic bacteria, their fate and their dangerousness in the Tietê River were assessed along 100 km starting from the city of São Paulo, Brazil. The data were compared with those from two German rivers. High loads of pathogens were found in the Tietê River near the city of São Paulo (Escherichia coli O157:H7, Shigella flexneri, and Shigella boydii), which were absent 30 km downstream of São Paulo. The antibiotic resistances observed in the Tietê river were rather low and decreased after the major input in São Paulo to significantly lower levels about 30 km downstream. While the Brazilian isolates were more susceptible for ampicillin than the German ones, the reverse was observed for gentamycin. For optimal control of infections in humans critical areas where these bacteria survived longer and their elimination mechanisms should be identified as well as the extent and the origin of antibiotic resistance should be determined.     

Critical soil conditions for oxygen stress to plant roots: Substituting the Feddes-function by a process-based model

Effects of insufficient soil aeration on the functioning of plants form an important field of research. A well-known and frequently used utility to express oxygen stress experienced by plants is the Feddes-function. This function reduces root water uptake linearly between two constant pressure heads, representing threshold values for minimum and maximum oxygen deficiency. However, the correctness of this expression has never been evaluated and constant critical values for oxygen stress are likely to be inappropriate. On theoretical grounds it is expected that oxygen stress depends on various abiotic and biotic factors. In this paper, we propose a fundamentally different approach to assess oxygen stress: we built a plant physiological and soil physical process-based model to calculate the minimum gas filled porosity of the soil (_{gas_min}) at which oxygen stress occurs.First, we calculated the minimum oxygen concentration in the gas phase of the soil needed to sustain the roots through (micro-scale) diffusion with just enough oxygen to respire. Subsequently, _{gas_min} that corresponds to this minimum oxygen concentration was calculated from diffusion from the atmosphere through the soil (macro-scale).We analyzed the validity of constant critical values to represent oxygen stress in terms of _{gas_min}, based on model simulations in which we distinguished different soil types and in which we varied temperature, organic matter content, soil depth and plant characteristics. Furthermore, in order to compare our model results with the Feddes-function, we linked root oxygen stress to root water uptake (through the sink term variable F, which is the ratio of actual and potential uptake).The simulations showed that _{gas_min} is especially sensitive to soil temperature, plant characteristics (root dry weight and maintenance respiration coefficient) and soil depth but hardly to soil organic matter content. Moreover, _{gas_min} varied considerably between soil types and was larger in sandy soils than in clayey soils. We demonstrated that F of the Feddes-function indeed decreases approximately linearly, but that actual oxygen stress already starts at drier conditions than according to the Feddes-function. How much drier is depended on the factors indicated above. Thus, the Feddes-function might cause large errors in the prediction of transpiration reduction and growth reduction through oxygen stress.We made our method easily accessible to others by implementing it in SWAP, a user-friendly soil water model that is coupled to plant growth. Since constant values for _{gas_min} in plant and hydrological modeling appeared to be inappropriate, an integrated approach, including both physiological and physical processes, should be used instead. Therefore, we advocate using our method in all situations where oxygen stress could occur.