Spatial Variation of the Precipitation Chemistry in the Thrace Region of Turkey

Pollutants affect not only the environment in which they originate since they are also transported by air currents to other locations. For this reason, air pollution is a global problem for all countries and the air and water quality need to be monitored carefully. More information on precipitation chemistry is required to determine the source of pollution as well as its effects on the ecosystems. In this study, precipitation chemistry has been analyzed for the first time by using simple bulk collectors located at four different sites in Northwest Turkey for a period of two years. About 650 sequential rainwater samples were collected and analyzed for pH, electrical conductivity, anions such as , , Cl^?, and cations such as Na⁺, K⁺, Mg²⁺, Ca²⁺, and . The selected sites were under the effect of different environmental factors. Our results showed that the highest and concentrations were measured in the Northwest of the research area. Additionally, it has been found that Ca²⁺ ions are abundant within all rainwater samples.     

A comparison of landslide susceptibility mapping of the eastern part of the North Anatolian Fault Zone (Turkey) by likelihood-frequency ratio and analytic hierarchy process methods

The North Anatolian Fault is known as one of the most active and destructive fault zones which produced many earthquakes with high magnitudes both in historical and instrumental periods. Along this fault zone, the morphology and the lithological features are prone to landslides. Kuzulu landslide, which is located near the North Anatolian Fault Zone, was triggered by snow melting without any precursor, occurred on March 17, 2005. The landslide resulted in 15 deaths and the destruction of about 30 houses at Kuzulu village. There is still a great danger of further landslides in the region. Therefore, it is vitally important to present its environmental impacts and prepare a landslide susceptibility map of the region. In this study, we used likelihood-frequency ratio model and analytical hierarchy process (AHP) to produce landslide susceptibility maps. For this purpose, a detailed landslide inventory map was prepared and the factors chosen that influence landslide occurrence were: lithology, slope gradient, slope aspect, topographical elevation, distance to stream, distance to roads, distance to faults, drainage density and fault density. The ArcGIS package was used to evaluate and analyze all the collected data. At the end of the susceptibility assessment, the area was divided into five susceptibility regions, such as very low, low, moderate, high and very high. The results of the analyses were then verified using the landslide location data and compared with the probability model. For this purpose, an area under curvature (AUC) and the seed cell area index assessments were applied. An AUC value for the likelihood-frequency ratio-based model 0.78 was obtained, whereas the AUC value for the AHP-based model was 0.64. The landslide susceptibility map will help decision makers in site selection and the site-planning process. The map may also be accepted as a basis for landslide risk-management studies to be applied in the study area.     

Coexistence of abyssal and ultra-depleted SSZ type mantle peridotites in a Neo-Tethyan Ophiolite in SW Turkey: Constraints from mineral composition,whole-rock geochemistry (major–trace–REE–PGE), and Re–Os isotope systematics

We present new, whole-rock major and trace element chemistry, including rare earth elements (REE), platinum-group elements (PGE), and Re–Os isotope data from the upper mantle peridotites of a Cretaceous Neo-Tethyan ophiolite in the Mu?la area in SW Turkey. We also report extensive mineral chemistry data for these peridotites in order to better constrain their petrogenesis and tectonic environment of formation. The Mu?la peridotites consist mainly of cpx-harzburgite, depleted harzburgite, and dunite. Cpx-harzburgites are characterized by their higher average CaO (2.27 wt.%), Al₂O₃ (2.07 wt.%), REE (53 ppb), and ¹⁸⁷Os/¹⁸⁸Os_(i) ratios varying between 0.12497 and 0.12858. They contain Al-rich pyroxene with lower Cr content of coexisting spinel (Cr# = 13–22). In contrast, the depleted harzburgites and dunites are characterized by their lower average CaO (0.58 wt.%), Al₂O₃ (0.42 wt.%), and REE (1.24 ppb) values. Their clinopyroxenes are Al-poor and coexist with high-Cr spinel (Cr# = 33–83). The ¹⁸⁷Os/¹⁸⁸Os_(i) ratios are in the range of 0.12078–0.12588 and are more unradiogenic compared to those of the cpx-harzburgites.Mineral chemistry and whole rock trace and PGE data indicate that formation of the Mu?la peridotites cannot be explained by a single stage melting event; at least two-stages of melting and refertilization processes are needed to explain their geochemical characteristics. Trace element compositions of the cpx-harzburgites can be modeled by up to ~ 10–16% closed-system dynamic melting of a primitive mantle source, whereas those of the depleted harzburgites and dunites can be reproduced by ~ 10–16% open-system melting of an already depleted (~ 16%) mantle. These models indicate that the cpx-harzburgites are the products of first-stage melting and low-degrees of melt–rock interaction that occurred in a mid-ocean ridge (MOR) environment. However, the depleted harzburgites and dunites are the product of second-stage melting and related refertilization which took place in a supra subduction zone (SSZ) environment. The Re–Os isotope systematics of the Mu?la peridotites gives model age clusters of ~ 250 Ma, ~ 400 Ma and ~ 750 Ma that may record major tectonic events associated with the geodynamic evolution of the Neo-Tethyan, Rheic, and Proto-Tethyan oceans, respectively. Furthermore, > 1000 Ma model ages can be interpreted as a result of an ancient melting event before the Proto-Tethys evolution.     

Code Development of Three-Dimensional General Relativistic Hydrodynamics with AMR (Adaptive-Mesh Refinement) and Results from Special and General Relativistic Hydrodynamics

In this paper, the general procedure to solve the general relativistic hydrodynamical (GRH) equations with adaptive-mesh refinement (AMR) is presented. In order to achieve, the GRH equations are written in the conservation form to exploit their hyperbolic character. The numerical solutions of GRH equations are obtained by high resolution shock Capturing schemes (HRSC), specifically designed to solve nonlinear hyperbolic systems of conservation laws. These schemes depend on the characteristic information of the system. The Marquina fluxes with MUSCL left and right states are used to solve GRH equations. First, different test problems with uniform and AMR grids on the special relativistic hydrodynamics equations are carried out to verify the second-order convergence of the code in one, two and three dimensions. Results from uniform and AMR grid are compared. It is found that adaptive grid does a better job when the number of resolution is increased. Second, the GRH equations are tested using two different test problems which are Geodesic flow and Circular motion of particle In order to do this, the flux part of GRH equations is coupled with source part using Strang splitting. The coupling of the GRH equations is carried out in a treatment which gives second order accurate solutions in space and time. This revised version was published online in July 2006 with corrections to the Cover Date.     

Hydrogeological and hydrogeochemical characterization of a karstic mountain region

Karstic limestone formations in the Mediterranean basin are potential water resources that can meet a significant portion of groundwater demand. Therefore, it is necessary to thoroughly study the hydrogeology and hydrogeochemistry of karstic mountain regions. This paper presents a detailed hydrogeological and hydrogeochemical characterization of the Nif Mountain karstic aquifer system in western Turkey, an important recharge source for the densely populated surrounding area. Based on the geological and hydrogeological studies, four major aquifers were identified in the study area including the allochthonous limestone in Bornova flysch, conglomerate-sandstone and clayey-limestone in Neogene series, and the Quaternary alluvium. Physicochemical characteristics of groundwater were measured in situ, and samples were collected at 59 locations comprised of springs and wells. Samples were analyzed for major ions, isotopic composition, arsenic, boron and heavy metals among other trace elements. It was found that the hydrogeological structure is complex with many springs having a wide range of discharge rates. High-discharge springs originate from allochthonous limestone units, whereas low-discharge springs are formed at the contacts with claystone and limestone units. Using stable isotope analysis data, a δ¹⁸O-deuterium relationship was obtained that lies between the Mediterranean meteoric and mean global lines. Tritium analyses showed that low-discharge springs originating from contact zones had longer circulation times compared to the high-discharge karstic springs. Furthermore, hydrogeochemical data revealed that groundwater quality significantly deteriorated as water moved from the mountain to the plains. Heavy metal, arsenic and boron concentrations were generally within drinking-water quality standards with a few exceptions occurring in residential and industrial areas located at the foothills of the mountain. Elevated arsenic concentrations were related to local geologic formations, which are likely to contain oxidized sulfite minerals in claystones. It is concluded that Nif Mountain overall has a significant potential to provide high-quality water with a safe yield of at least 50 million m³/year, which corresponds to about 28% of the mean annual inflow to the Tahtali reservoir, a major water resource for the city of Izmir. An erratum to this article can be found at     

Evaluation of digital image processing (DIP) in analysis of magnetic separation fractions from Na-feldspar ore

Combination of flotation and magnetic separation methods is widely used for enrichment of feldspar ores by purifying from dark-colored gangue minerals such as iron and titanium. In this study, the removal of dark-colored minerals from feldspar ore (Aydin Cine region of Turkey) was studied using a dry magnetic separator. The effect of several parameters such as feed particle size, blade angle, and roll speed on the removal efficiency was investigated in detail. In addition, the gangue contents of the magnetic and non-magnetic products were determined by a digital image processing (DIP) method in terms of using color differences between the feldspar sample and gangue minerals. The results obtained from this study clearly indicated that the dry magnetic separation method can be successfully applied in enrichment of feldspar. Meanwhile, the particle size of the sample showed no significant influence on the separation recovery. According to the results obtained from the digital image processing process, the sample with 0.04% cross sectional area of dark-colored minerals can be obtained at roll speed of 100 rpm and 130° of blade angle using the original particle size of 500×106 μm. Additionally, most importantly, these results showed that digital image processing method can be used to determine gangue content (dark-colored minerals) of the magnetic separation products compared to conventional methods as a simple, a reliable, and a repeatable method.     

C2/c pyroxene phenocrysts from three potassic series in the Neogene alkaline volcanics, NE Turkey: their crystal chemistry with petrogenetic significance as an indicator of P–T conditions

Chemical and structural data are reported for C2/c pyroxene phenocrysts collected from three potassic series (Group A: basanite-tephrite, Group B: tephrite-phonolitic tephrite, Group C: alkaline basalt-trachybasalt) of the Neogene alkaline volcanics (NAVs) in northeastern Turkey, in order to investigate the evolution of the magmatic plumbing system and the location of magma chamber(s) with crystallization conditions. The rock series hosting the clinopyroxene phenocrysts show generally porphyritic texture and have a variable phenocryst-rich nature (20–58%), with phenocryst assemblages characterized by cpx ± ol ± plag ± foid ± amp ± bio. The clinopyroxene phenocrysts can be chemically classified as Ti- and Fe³⁺-rich Al-diopsides for Groups A and B (AB-cpxs) and Ti- and Fe³⁺-poor Al-diopsides for Group C (C-cpxs). They have poorly variable composition, clustering in the diopside field. Structurally, the diopside groups have nearly similar a (ranging from 9.73 to 9.75 ?), V _cell (437.2–440.9 ?³), and 〈beta〉 angle values (106.01°–106.23°), but some differences in polyhedral parameters and geometries of the AB-cpxs and C-cpxs have been observed. For example, the AB-cpxs are characterized by larger c (5.27–5.30 vs. 5.25–5.28 ?), V _T (2.27–2.30 vs. 2.23–2.28 ?³), and V _M2 (25.53–25.72 vs. 25.41–25.59 ?³) values and smaller b (8.87–8.88 vs. 8.88–8.91 ?) and V _M1 (11.49–11.63 vs. 11.64–11.83 ?³) values with respect to the C-cpxs. In addition, the AB-cpxs show higher values of V _M2/V _M1 (2.20–2.23) due to large V _M2 and small V _M1 compared to the V _M2/V _M1 ratios of the C-cpxs (<2.19). Such differences in the crystal structure of the AB-cpxs and C-cpxs from the NAVs are partly related to different crystallization pressures, but mostly related to variation in melt composition and, possibly, the influence of other crystallizing mineral phases. In particular, R(M2-O1) and R(M1-O2) (i.e. bond lengths) differences in the clinopyroxenes of different groups support the presence of evolved host rocks with different alkaline character (i.e. silica-undersaturated Groups A–B and silica-saturated Group C). Based on the cpx-geothermobarometry, the crystallization pressures for the C-cpxs are lower than 4.5 kbars, but the AB-cpxs have relatively high-pressure values (5.6–10.6 kbars), suggesting that the AB-cpxs crystallized in higher pressure environments. The relatively higher crystallization temperatures of the AB-cpxs also indicate higher cooling rates. The P–T estimates suggest that the source regions of the clinopyroxene phenocrysts from the NAVs were crustal magma chambers in a closed plumbing system at a moderate- to low-pressure regime.     

Swell pressure prediction by suction methods

Soil suction is the most relevant soil parameter for characterization of the swell behavior. An attempt was made to predict swell pressures from soil suction measurements. In this study, Na-bentonite was mixed with kaolinite in the ratios of 5, 10, 15, 20 and 25% of dry kaolinite weight to obtain soils in a wide range of plasticity indices (i.e. 30, 50, 68, 84 and 97%). Suction measurements using thermocouple psychrometer technique were made on statically compacted specimens. The dependence of soil suction on water content, dry density and bentonite content was examined. Soil suction was correlated to the soil properties, namely, water content, plasticity index, dry density, cation exchange capacity and specific surface area using multiple regression analyses. The correlations revealed a simple regression equation for a quick prediction of soil suctions from easily determined soil properties. In order to investigate soil suction versus swell pressure behavior, the results of standard constant volume swell tests (ASTM, 1990) performed on statically compacted samples of these clay mixtures were used. A linear relationship was established between the logarithm soil suction and the swell pressure. It was also found that an experimental relationship which would directly relate the initial soil suction to the swell pressure can be established.