Groundwater nitrate pollution in the Essaouira Basin (Morocco)

The Essaouira Basin (Morocco) contains a multi-layered aquifer situated in fractured and karstic materials from the Middle and Upper Cretaceous (the Cenomanian, Turonian and Senonian). Water percolates through the limestone and dolomite formations of the Turonian stage either through the marls and calcareous marls of the Cenomanian or through the calcareous marly materials of the Senonian. The aquifer system may be interconnected since the marl layer separating the Turonian, Cenomanian and Senonian aquifers is thin or intensively fractured. In that case, the water is transported through a network of fractures and stratification joints. This paper describes the extent of the nitrate pollution in the area and its origin. Most of the wells and drillholes located in the Kourimat perimeter are contaminated by nitrates with some concentrations over $\text{400 }\text{mg}\text{l}{}^{\mathrm{?1}}$. Nitrate contamination is also observed in the surface water of the Qsob River, which constitutes the natural outlet of the multi-layered complex aquifer system. In this area, agriculture is more developed than in the rest of the Essaouira Basin. Diffuse pollution of the karstic groundwater body by agricultural fertiliser residues may therefore partially explain the observed nitrate pollution. However, point pollution around the wells, springs and drillholes from human wastewater, livestock faeces and the mineralisation of organic debris close to the Muslim cemeteries cannot be excluded.     

Malaysian trawlers: economics of vessel size

This article focuses on the economics of trawling in a location-specific fishery that is affected by seasonal monsoons. Both field evaluation and econometric models were used to determine the economic performances of trawlers of different tonnages. The findings indicate that in a multispecies monsoon-affected fishery medium-sized vessels in the category of 20–30 tons were most efficient.     

Estimation of clay content in soil based on resistivity modelling and laboratory measurements

The determination of clay content in near‐surface formations is crucial for geotechnical, hydrogeological and oil‐contamination studies. We have developed a technique for estimating clay content that consists of the minimization of the difference between the theoretically calculated and measured soil resistivities as a function of water salinity. To calculate the resistivity, we used a model that takes into account the electrochemical processes in the clay micropores. The experimental measurements of soil resistivity were performed on soil samples, completely saturated by brines at different concentrations of NaCl salt in the range 0.6–100 g/l, to obtain the resistivity versus salinity curve. The parameters obtained with this curve inversion are the clay content, the total porosity and the cation exchange capacity. To verify the new technique, we determined clay concentrations of artificial mixtures of calibrated sand and clay. The relative mean error in the clay content does not exceed 20% for a 5% fitting error of the resistivity versus salinity curves. Such evaluations allow the correct separation of the main lithological groups (sand, sandy loam, loam, and light, medium and heavy clay). We applied this technique to estimate the petrophysical parameters of soils (clay content, porosity and cation exchange capacity) at various sites in Mexico. The results improved the interpretation of the vertical electrical soundings, the lithological soil characterization and the delineation of oil‐contaminated areas.     

Seismic-Magnetic Effect of Swarms and Strong Earthquakes along Gulf of Aqaba Fault Segments in Egypt

Geotectonics - Seismo-magnetic investigation can play an important role in the investigation of various phenomena connected with earthquakes. The main target of this study is to investigate the...     

Variation of the Chemistry of the Dead Sea Brine as Consequence of the Decreasing Water Level

For many years, the Dead Sea suffers from an annual inflow deficiency of about one billion cubic meters, flood and baseflow. The water level changes are related to the majority of surface water inflows diverted for irrigation purposes, in addition to intensive loss of water by the high rate of evaporation and industrial water use. This causes the Dead Sea water level to decline about 35 m within the last 50 years for a long-term average of about 0.79 m per year. The changes in the hydrochemical composition were simulated experimentally to determine the changes that take place as a function of brine water evaporation level and its density. The Total Dissolved Solids (TDS) and the density of the Dead Sea water varies as a function of its water evaporation level changes. It was found that the density variation is not following a linear function with respect to water volume changes. But it follows the total amount of precipitate that occurred at different water levels. The electrical conductivity (EC) changes with respect to time and the prevailing temperature. There was no formula to calculate the high salinity of brine water above the normal ocean water. Consequently, the EC measurements were adopted to represent the Dead Sea water salinity. But in this research a converging factor (0.80971) has been found to convert the TDS values into salinity values. On contrary, the pH values revealed an inverse relationship with respect to the evaporation levels.     

Accurate Ocean Bottom Seismometer Positioning Method Inspired by Multilateration Technique

The positioning of ocean bottom seismometers (OBS) is a key step in the processing flow of OBS data, especially in the case of self popup types of OBS instruments. The use of first arrivals from airgun shots, rather than relying on the acoustic transponders mounted in the OBS, is becoming a trend and generally leads to more accurate positioning due to the statistics from a large number of shots. In this paper, a linearization of the OBS positioning problem via the multilateration technique is discussed. The discussed linear solution solves jointly for the average water layer velocity and the OBS position using only shot locations and first arrival times as input data.     

Chlorophyll concentration and surface temperature changes associated with earthquakes

The preparation process of an impending earthquake may leave fingerprints on the earth??s surface. Elastic strain in rocks, formation of micro-cracks, gas releases and other chemical or physical activities in the earth??s crust before and during earthquakes has been reported to cause rises in temperature, surface latent heat flux (SLHF), upwelling index and chlorophyll-a (Chl-a) concentration on the ground or sea surface. Changes in surface temperature can be monitored with thermal infrared sensors such as NOAA-AVHRR and microwave radiometers like AMSR-E/Aqua. SLHF data and upwelling indices are provided by National Centers for Environmental Prediction (NCEP) Reanalysis Project and Pacific Fisheries Environmental Laboratory, respectively. This study examines behaviors of the above four factors prior to the past three oceanic and coastal earthquakes occurred at the Pacific Ocean (Northern California of June 15, 2005, Central California of September 28, 2004, and December 22, 2003). We were successful in detecting pre-earthquake anomalies prior to all three earthquakes. Our detailed analysis revealed 1?C5?°C rises in surface temperature in epicentral areas. Considerable anomalies in Chl-a concentration, 1?C2?weeks before the day of the main earthquakes, were spotted, which are attributed to the rise in upwelling index. Time series of SLHF showed meaningful rises from 1?month to a fortnight before the earthquake events. One problem in our research was the low resolution of the data which makes the graphs that are generated from NCEP database affected by all sources of anomalies, other than seismic activities, within an about 1.8°?C2.5° (200?km) area.     

Flow units delineation of multiple hydrocarbon reservoirs using hydraulic zonation technique via cluster analysis algorithm,Zeit Bay Field,Gulf of Suez,Egypt

Investigation of hydraulic units in drilled wells through multiple reservoirs in Zeit Bay Field is the main target of this paper. Karim Limestone and Nubian Sandstone are target reservoirs in this study. Hydraulic zones provide a fundamental unit for subsequent reservoir characterization and simulation and also prove to be helpful in defining future well completion and work over practices. Hydraulic zonation by means of cluster analysis has been utilized to achieve this target. Hierarchical cluster analysis, elbow method, and k-means clustering are the main steps of this analysis. Petrophysical properties obtained from cores are utilized to perform this zonation. These properties are permeability and porosity data. Results have been validated by comparing the geological behavior of each zone against the measured permeability curve. Finally through this zonation, flow units which have the potential to extract fluids are determined more accurately. Petroleum geologists and engineers are more interested in these results. The cluster analysis flow suggesting in this paper is cost-effective due to lack of need for any commercial software.     

The vein-type barite mineralization of the Draïssa ore field,Ougarta; SW- Algeria: mineralogy,trace elements and halogens

The Draïssa barite vein system in the Ougarta district is located in southwestern Algeria. It is the principal mineral deposit of economic interest of the area. The mineralization is hosted by Cambrian sedimentary rocks that unconformably overlie Precambrian formations. The mineralized structures consist mostly of barite and quartz with minor sulfide minerals and trend dominantly NE-SW, NW-SE, and E-W. Siliceous alteration zones are associated with the vein system. Samples of barite ore are characterized by low total REE contents ranging from 9 to 50 ppm and positive Eu (2–2.15 ppm) and Y (1.2–11.1 ppm) anomalies, indicating hydrothermal activity during mineralization. Halogen data of the barite show that the Cl/Br molar ratio is 189:571 and the Na/Br ratio is 34:376, indicating that the sulfur was derived from seawater. The Ba-enrichment trend in the volcanic rocks of Draïssa is interpreted as possible probable source of the Ba (424–3039 ppm Ba). It appears that the barite-quartz deposits were formed in two stages. Endogenous fluids deposited the primary vein materials, consisting of quartz associated with copper sulfides. Exogenous fluids (cold seawater) became heated during ascendant fluid movement. Mineralization was governed by convective motions and the barite and galena fillings were deposited in openings created by normal faulting.