Tsunami hydrodynamic force on a building using a SPH real-scale numerical simulation

Natural Hazards - One of the most important aspects in tsunami studies is the behaviour of the wave when it approaches the coast. Information on physical parameters that characterize waves is often...     

Textural characteristics of sediments along the southern Red Sea coastal areas,Saudi Arabia

A lack of understanding exists of the origin and textural characteristics of Saudi Arabian Red Sea coastal sediments. This paper concerns the southern coastline of Jizan on the Saudi Red Sea. It is some 160 km long characterised by either narrow rocky headlands with intermittent pocket beaches or wide low-lying beaches dissected by wadis. Granulometric testing of samples from 135 locations showed that beach sand size was mainly very fine to medium grained (M _z = 3.93 Ø), sorting ranged from 1.65 to 0.41 and skewness values from ?051 to 0.39, being mainly negative; dune sands were medium to fine grained (M _z = 1.13 Ø; average sorting 2.8), while skewness variations within dune samples indicated symmetrical to fine skewed values (б _Ι = 0.55 to 0.89). Most foreshore samples were derived from wadis. Wadi mud levels can be high, e.g. Baysh (84%), and wadi Samrah (90%) with mean grain size ranging from very fine to medium sand (M _z = 3.9 Ø), sorting being well to poor (0.45 to 1.52) due to sediment influxes. Sabkha had a wide range of sand/mud and significantly higher carbonate percentages than other environments. Sediment source differences and littoral reworking contributed to grain size variation. The carbonate content varied between 1.5 and 31.5% due to hinterland contributions, and spatial analysis showed increasing quantities of carbonate minerals towards the south. On the wider geographical front, findings from Jizan are similar to those of the Northern United Arab Emirates (UAE), including sabkhas, being composed of sand, skeletal carbonate, fine fluvial material and wind-blown silt and clay components of wadi origin. Further work on the northeastern Red Sea edge can hopefully confirm these findings.     

Compressibility and collapse characteristics of arid saline sabkha soils

Arid saline soils are well-distributed over the globe, with a variety of nomenclature. Along the seaboard of the Arabian Gulf, these soils exist widely and are known as “sabkhas”. Despite the cemented and saline characteristics of the sabkha matrix, a recent investigation indicated that flooding the saline sabkha with distilled water in the conventional oedometer apparatus was incapable of producing a sudden reduction in volume and/or a significant collapse. This study proposes a modification to the conventional oedometer on undisturbed sabkha specimens to consolidating specimens under a constant head. Tests were, therefore, conducted on undisturbed sabkha specimens to assess their compressibility and collapse potential whereby percolation of water was commenced under two pressures to evaluate the role of sustained pressure on the collapse mechanisms.

Despite the low compressibility of sabkhas, results of these tests indicated that these arid, saline soils possess a high collapse potential attributable primarily to dissolution of sodium chlorides, leaching of calcium ions and soil grain adjustment. The collapse potential increases with an increase in the acting pressure at which percolation of water takes place. In contrast to other typical soils, the collapse of arid, saline soils is not instantaneous but requires sufficient volume of water to percolate in order to enhance the dissolution of the cementing agents.     

Inverted basin analysis and geological modeling, Razzak Oil Field, Western Desert, Egypt

This paper deals with a geological modeling based on seismic and well data of the Razzak Oil Field, located in northwestern desert of Egypt aimed mainly at improving the knowledge on inversion tectonics in the sedimentary basin corresponding to the oil field. Contour maps of significant seismic horizons corresponding to the top of Meso-Cenozoic formations which represent the stratigraphic traps of the oil field (top Apollonia, top Abu Roash “G,” top Bahariya, and top Alamein) are presented. The final model consists of geological cross-sections showing the inversion basin in the Razzak Oil Field. From the seismic data interpretation and modeling, we have different results matching with regional tectonic and transcurrent motion model. There are two main fault trends: the first one was northeast–southwest matching the Jurassic rift where the Jurassic is characterized by normal faults that formed in conjunction with the opening of the Neo-Tethys, and the other fault trend is northwest–southeast matching with Cretaceous faults. This is followed by a period of compressive tectonism (Syrian Arc deformation) in which two of the Jurassic normal faulted blocks (one at the northern part and the other at the southern part of the Qattara–Alamein ridge in the Razzak field) are reactivated as reverse faulted by Eocene–Early Oligocene time.     

On the Application of the Novel Thin Spray-on Liner (TSL): A Progress Report in Mining Operations

Stability is the main problem in underground excavations that can result in rock-related accidents or closure of mines. This is often controlled by the geological condition of the rockmass and the in situ stress field where excavation is being carried out. Over the years, conventional support systems such as bolts, shotcrete and mesh have been the standard support systems used in difficult ground conditions to maintain stability of underground openings. The novel Thin Spray Liner (TSL) is a technology with an improvement in terms of support capabilities for difficult geological conditions. This technology is predicted to replace conventional support systems, as it offers a significant yielding capacity that is better than that of the traditional techniques of controlling strata. The performance of the TSL lies between that of shotcrete and wire mesh. The TSL has numerous advantages regarding rock reinforcement such as rapid curing period, fast application, high tensile strength, high adhesion properties that prevent movement of rock keyblocks, improved cycle times, reduction in material-handling compared to shotcrete, and a significant ability to penetrate joints. These advantages increase the allowance for mechanisation and improvement of safety in excavations. Despite various benefits of TSLs, there are shortcomings which make end-users to be sceptical about the technology. This study provides a detailed review of the mechanism, properties, composition and types, as well as the general and mining applications of TSLs. It also describes the challenges faced by the mining industry and other end-users in accepting the technology as a solution for stability issues in underground openings. In addition, some insightful suggestions are made as recommendations for future work on the development of suitable, effective and efficient thin surface rock support technology within limitations/constraints.

     

Contribution of remote sensing and GIS to analysis of the risk of flooding in the Zat basin (High Atlas-Morocco)

Natural Hazards - Despite the controversy regarding their use, school buildings are often assigned as emergency evacuation shelters, temporary accommodation and aid distribution hubs following...     

A numerical study on seismic risk assessment of historic masonry towers: a case study in San Gimignano

After a brief introduction on the research project RiSEM (Seismic Risk of Monumental Buildings), the paper discusses on the seismic assessment of historic masonry towers according to the Italian “Guidelines for the assessment and mitigation of the seismic risk of the cultural heritage” that identifies an analysis methodology based on three different levels of evaluation, according to an increased knowledge of the structure. The RiSEM project aimed at developing and testing innovative and expeditious methodologies (i.e. either without or with a minimal direct contact with the masonry building) to evaluate all the main structural features of the monumental buildings required for the assessment of their seismic safety. As a relevant case study the “Town of Fine Towers”, San Gimignano (Italy), listed under the UNESCO World Cultural Heritage Sites, was selected. The paper summarizes the analyses performed on one of the San Gimignano towers: the Coppi-Campatelli one. The seismic vulnerability of the tower was evaluated with reference to the above guidelines, and the paper reports and critically compares the results obtained for the three levels of evaluation there defined: LV1 (analysis at territorial level), LV2 (local analysis) and LV3 (global analysis).     

Spatial organization of decadal and bidecadal rainfall fluctuations in southern North America and southern South America

The spatial organization of decadal and bidecadal components (fluctuations) of annual rainfall is identified in this research for two regions: (1) southern South America, and (2) southern North America (conterminous USA, southeastern Canada and northern and central Mexico). Findings indicate that these decadal and bidecadal components have highly coherent wave-like spatial organization. Two types of organization of decadal and bidecadal components of annual rainfall were identified: a train of propagating fluctuations and quasi-standing fluctuations. For decadal components, such patterns alternate in time. A widespread change in the spatial organization of decadal component of annual rainfall took place simultaneously in both continents in 1932. The bidecadal component is organized as standing fluctuations in southern North America and as travelling fluctuations in southern South America, The spatial pattern of decadal fluctuations of annual rainfall has 12- and 13-year cycles, and the spatial pattern of bidecadal fluctuations has predominantly 21- and 22-year cycles.     

Community forest management in Mexico: carbon mitigation and biodiversity conservation through rural development

Forest management is an important carbon mitigation strategy for developing countries. As demonstrated by the case of Mexico, community forest management is especially effective because it offers tangible local benefits while conserving forests and sequestering carbon. Community forestry receives minimal government support now, but the clean development mechanism (CDM) of the Kyoto Protocol could leverage additional resources to promote the approach in Mexico and elsewhere. We argue that adequately designed and implemented, community forestry management projects can avoid deforestation and restore forest cover and forest density. They comprise promising options for providing both carbon mitigation and sustainable rural development. These kinds of projects should be included in the CDM.     

Consequences of a freshwater canal discharge on the benthic community and its habitat on an exposed sandy beach

This paper analyses the spatial and temporal effects of a freshwater discharge (Canal Andreoni) on the macroinfauna community and its habitat in a sandy beach of Uruguay. Bimonthly, we examined 17 environmental variables plus macroinfauna abundance, biomass, richness, evenness and diversity of three sites: Andreoni, at the canal mouth, Coronilla, at 1 km, and Barra, at 13 km from the mouth. Both univariate and multivariate techniques showed an increasing degree of perturbation towards the canal. This was reflected by abiotic and biotic differences between sites and by a consistent two-dimensional ordination of the samples. A clear seasonal pattern was found, specially accentuated at Coronilla, where the effects of the canal were stronger in winter and weaker in summer. Multivariate linking between macroinfauna and its habitat highlighted the role of salinity as explanatory variable of the observed trends.