Constraints from deuterium on the formation of icy bodies in the Jovian system and beyond

We consider the role of deuterium as a potential marker of location and ambient conditions during the formation of small bodies in our Solar system. We concentrate in particular on the formation of the regular icy satellites of Jupiter and the other giant planets, but include a discussion of the implications for the Trojan asteroids and the irregular satellites. We examine in detail the formation of regular planetary satellites within the paradigm of a circum-Jovian subnebula. Particular attention is paid to the two extreme potential subnebulae—“hot” and “cold”. In particular, we show that, for the case of the “hot” subnebula model, the D:H ratio in water ice measured from the regular satellites would be expected to be near-Solar. In contrast, satellites which formed in a “cold” subnebula would be expected to display a D:H ratio that is distinctly over-Solar. We then compare the results obtained with the enrichment regimes which could be expected for other families of icy small bodies in the outer Solar system—the Trojan asteroids and the irregular satellites. In doing so, we demonstrate how measurements by Laplace, the James Webb Space Telescope, HERSCHEL and ALMA will play an important role in determining the true formation locations and mechanisms of these objects.     

S2O, polysulfuroxide and sulfur polymer on Io's surface?

To settle the question of disulfur monoxide and sulfur monoxide deposition and occurrence on Io's surface, we performed series of laboratory experiments reproducing the condensation of S₂O at low temperature. Its polymerization has been monitored by recording infrared spectra under conditions of temperature, pressure, mixing with SO₂ and UV-visible radiation simulating that of Io's surface. Our experiments show that S₂O condensates are not chemically stable under ionian conditions. We also demonstrate that SO and S₂O outgassed by Io's volcanoes and condensing on Io's surface should lead to yellow polysulfuroxide deposits or to white deposits of S₂O diluted in sulfur dioxide frost (i.e., S₂O/SO₂ < 0.1%). Thus S₂O condensation cannot be responsible for the red volcanic deposits on Io. Comparison of the laboratory infrared spectra of S₂O and polysulfuroxide with NIMS/Galileo infrared spectra of Io's surface leads us to discuss the possible identification of polysulfuroxide. We also recorded the visible transmission spectra of sulfur samples resulting from polysulfuroxide decomposition. These samples consist in a mixture of sulfur polymer and orthorhombic sulfur. Using the optical constants extracted from these measurements, we show that a linear combination of the reflectance spectra of our samples, the reflectance spectrum of orthorhombic S₈ sulfur and SO₂ reflectance spectrum, leads to a very good matching of Io's visible spectrum between 330 and 520 nm. We conclude then that Io's surface is probably mainly composed of sulfur dioxide and a mixture of sulfur S₈ and sulfur polymer. Some polysulfuroxide could also co-exist with these dominant components, but is probably restricted to some volcanic areas.     

Luciola hypertelescope space observatory: versatile, upgradable high-resolution imaging, from stars to deep-field cosmology

Luciola is a large (1 km) “multi-aperture densified-pupil imaging interferometer”, or “hypertelescope” employing many small apertures, rather than a few large ones, for obtaining direct snapshot images with a high information content. A diluted collector mirror, deployed in space as a flotilla of small mirrors, focuses a sky image which is exploited by several beam-combiner spaceships. Each contains a “pupil densifier” micro-lens array to avoid the diffractive spread and image attenuation caused by the small sub-apertures. The elucidation of hypertelescope imaging properties during the last decade has shown that many small apertures tend to be far more efficient, regarding the science yield, than a few large ones providing a comparable collecting area. For similar underlying physical reasons, radio-astronomy has also evolved in the direction of many-antenna systems such as the proposed Low Frequency Array having “hundreds of thousands of individual receivers”. With its high limiting magnitude, reaching the m _v?=?30 limit of HST when 100 collectors of 25 cm will match its collecting area, high-resolution direct imaging in multiple channels, broad spectral coverage from the 1,200 Å ultra-violet to the 20 μm infra-red, apodization, coronagraphic and spectroscopic capabilities, the proposed hypertelescope observatory addresses very broad and innovative science covering different areas of ESA’s Cosmic Vision program. In the initial phase, a focal spacecraft covering the UV to near IR spectral range of EMCCD photon-counting cameras (currently 200 to 1,000 nm), will image details on the surface of many stars, as well as their environment, including multiple stars and clusters. Spectra will be obtained for each resel. It will also image neutron star, black-hole and micro-quasar candidates, as well as active galactic nuclei, quasars, gravitational lenses, and other Cosmic Vision targets observable with the initial modest crowding limit. With subsequent upgrade missions, the spectral coverage can be extended from 120 nm to 20 μm, using four detectors carried by two to four focal spacecraft. The number of collector mirrors in the flotilla can also be increased from 12 to 100 and possibly 1,000. The imaging and spectroscopy of habitable exoplanets in the mid infra-red then becomes feasible once the collecting area reaches 6 m², using a specialized mid infra-red focal spacecraft. Calculations (Boccaletti et al., Icarus 145, 628–636, 2000) have shown that hypertelescope coronagraphy has unequalled sensitivity for detecting, at mid infra-red wavelengths, faint exoplanets within the exo-zodiacal glare. Later upgrades will enable the more difficult imaging and spectroscopy of these faint objects at visible wavelengths, using refined techniques of adaptive coronagraphy (Labeyrie and Le Coroller 2004). Together, the infra-red and visible spectral data carry rich information on the possible presence of life. The close environment of the central black-hole in the Milky Way will be imageable with unprecedented detail in the near infra-red. Cosmological imaging of remote galaxies at the limit of the known universe is also expected, from the ultra-violet to the near infra-red, following the first upgrade, and with greatly increasing sensitivity through successive upgrades. These areas will indeed greatly benefit from the upgrades, in terms of dynamic range, limiting complexity of the objects to be imaged, size of the elementary “Direct Imaging Field”, and limiting magnitude, approaching that of an 8-m space telescope when 1,000 apertures of 25 cm are installed. Similar gains will occur for addressing fundamental problems in physics and cosmology, particularly when observing neutron stars and black holes, single or binary, including the giant black holes, with accretion disks and jets, in active galactic nuclei beyond the Milky Way. Gravitational lensing and micro-lensing patterns, including time-variable patterns and perhaps millisecond lensing flashes which may be beamed by diffraction from sub-stellar masses at sub-parsec distances (Labeyrie, Astron Astrophys 284, 689, 1994), will also be observable initially in the favourable cases, and upgrades will greatly improve the number of observable objects. The observability of gravitational waves emitted by binary lensing masses, in the form of modulated lensing patterns, is a debated issue (Ragazzoni et al., MNRAS 345, 100–110, 2003) but will also become addressable observationally. The technology readiness of Luciola approaches levels where low-orbit testing and stepwise implementation will become feasible in the 2015–2025 time frame. For the following decades beyond 2020, once accurate formation flying techniques will be mastered, much larger hypertelescopes such as the proposed 100 km Exo-Earth Imager and the 100,000 km Neutron Star Imager should also become feasible. Luciola is therefore also seen as a precursor toward such very powerful instruments.     

Biogeochemical impact of a model western iron source in the Pacific Equatorial Undercurrent

Trace element distributions in the source waters of the Pacific Equatorial Undercurrent (EUC) show the existence of elevated total acid-soluble iron concentrations. This region has been suggested to contribute enough bioavailable iron to regulate interannual and interglacial variability in biological productivity downstream in the high-nitrate low-chlorophyll upwelling zone of the eastern equatorial Pacific. We investigated the advection and first-order biogeochemical impact of an imposed, data-based iron maximum in the western Pacific EUC using an ecosystem model forced by a global dynamical model. We imposed two source profiles of iron constrained by total acid-soluble iron measurements. Though the data for total acid-soluble iron included both dissolved and acid-soluble particulate iron species, we treated all of the total acid-soluble iron as if it was dissolved and bioavailable. A deeper (270 m) source was centered in the density horizon of the observed iron maximum and a shallower (180 m) source was located in the core of our model's EUC, where a dissolved iron maximum has been frequently postulated. These source runs were compared with a control run that contained no specific source of iron associated with the EUC. In the source runs elevated iron concentrations were simulated in the EUC across its entire zonal span, evident as a subsurface plume of dissolved iron slightly below the core of the EUC. In the control run there was no iron maximum associated with the EUC. Upwelling of iron-replete water in the central and eastern equatorial Pacific increased integrated primary productivity in the Wyrtki box (180°W:90°W, 5°S:5°N, 0:200 m) by 41% and 66% for the deeper and shallower iron perturbation, respectively. The source runs increased the realism of the zonal extent of HNLC conditions and the meridional distributions of biological productivity, relative to the control run. However, in the source simulations surface chlorophyll concentrations were too high by a factor of two and maximum surface nitrate concentrations were too low, relative to climatologies. The relative abundance of diatoms roughly doubled upon the input of additional iron, exceeding field observations. Though biogeochemical data are limited and we did not adjust parameters to optimize the model fits to observations, these results suggest that acid-soluble particulate iron supplied to the EUC in the western equatorial Pacific is unlikely to be entirely bioavailable.     

An automated salt‐tracing gauge for flow‐velocity measurement

This article introduces the SVG (salt‐velocity gauge), a novel automated technique for measuring flow velocity by means of salt tracing. SVG allows a high measuring rate (up to one every 2 seconds), short control section length (down to 10 cm), high accuracy (+[sol ]?1·5 cm s^?1), and unbiased calculation of the mean velocity in experimental conditions with turbulent, supercritical flow. A few cubic centimetres of saturated salt solution (NaCl) are injected into the flow at regular time intervals using a programmable solenoid valve. The tracer successively passes two conductivity probes placed a short distance downstream. The transformation of the signal between the two probes is modelled as a one‐dimensional diffusion wave equation. Model calibration gives an estimation of the mean velocity and the diffusion for each salt plume. Two implementations of the SVG technique are described. The first was an outdoors simulated rainfall experiment in Senegal (conductivity probes at 40 cm apart, 8 Hz measurement rate, salt injections at 10 second intervals). Mean velocity was estimated to range between 0·1 and 0·3 m s^?1. The second was a laboratory‐based flume experiment (conductivity probes at 10 cm apart, 32 Hz, salt injections at 2 second intervals). Another SVG with probes at 34 cm apart was used for comparison. An acoustic Doppler velocimeter (ADV) was also used to give an independent assessment of velocity. Using the 10 cm salt gauge, estimated mean velocity ranged from 0·6 to 0·9 m s^?1 with a standard deviation of 1·5 cm s^?1. Comparisons between ADV, 10 cm SVG and 34 cm SVG were consistent and demonstrated that the salt‐tracing results were unbiased and independent of distance between probes. Most peaks were modelled with r² > 90 per cent. The SVG technology offers an alternative to the dye‐tracing technique, which has been severely criticized in the literature because of the wide interval of recommended values for the correction factor α to be applied to the timings. This article demonstrates that a fixed value of α is inappropriate, since the correction factor varies with velocity, diffusion and the length of the control section. Copyright © 2005 John Wiley & Sons, Ltd.     

An interpolation method taking into account inequality constraints: II. Practical approach

Common features of models for interpolation, consistent with a finite number of inequality constraints on the range of values of a variablez, are discussed. A method based on constrained quadratic minimization yielding kriging estimates when no constraints exist, is presented. A computationally efficient formulation of quadratic minimization is obtained by using results on duality in quadratic programming. Relevant properties of the optimal interpolator are derived in a simple, self-contained way. The method is applied to mapping of horizon depth and estimation of thickness of an oil-bearing formation.     

Chemical characterization of porewaters in an intertidal mudflat of the Seine estuary: relationship to erosion-deposition cycles

A seasonal field study was carried out in the Seine estuary to determine the chemistry of sediment porewaters using the 'peeper' technique and changes in the elevation of the mudflats using the 'Altus' technique. This approach allowed us to evaluate the release of nutrients and to link these releases to the sediment hydrodynamics. Our results show that nutrient and organic matter cycling in a Seine estuary mudflat exhibits a seasonal behaviour, which is mainly influenced by variations in hydrodynamics. Sediments, rich organic matter, were input during floods and they were mineralized during summer and autumn, releasing nutrients and dissolved organic carbon into the sediment porewaters. The nutrient release, including ammonium, is mainly linked to the mineralization of organic matter, while the release of phosphate is delayed. The delay could be the result of phosphate association with organic matter and/or its co-precipitation with calcium and iron.     

Discovery of an albite gneiss from the Ile de Groix (Armorican Massif, France): geochemistry and LA-ICP-MS U–Pb geochronology of its Ordovician protolith

For the first time, an albite orthogneiss has been recognised and dated within the HP–LT blueschist facies metabasites and metapelites of the Ile de Groix. It is characterised by a peraluminous composition, high LILE, Th and U contents, MORB-like HREE abundances and moderate Nb and Y values. A U–Pb age of 480.8?±?4.8?Ma was obtained by LA-ICP-MS dating of zircon and titanite. It is interpreted as the age of the magmatic emplacement during the Early Ordovician. Morphologically different zircon grains yield late Neoproterozoic ages of 546.6–647.4?Ma. Zircon and titanite U–Pb ages indicate that the felsic magmatism from the Ile de Groix is contemporaneous with the acid, pre-orogenic magmatism widely recognised in the internal zones of the Variscan belt, related to the Cambro-Ordovician continental rifting. The magmatic protolith probably inherited a specific chemical composition from a combination of orogenic, back-arc and anorogenic signatures because of partial melting of the Cadomian basement during magma emplacement. Besides, the late Devonian U–Pb age of 366?±?33?Ma obtained for titanite from a blueschist facies metapelite corresponds to the age of the HP–LT peak metamorphism.