An analysis of climatic and human induced determinants of agricultural land use changes in Shupiyan area of Jammu and Kashmir state,India

The economy of the Jammu and Kashmir state depends mostly on traditional forms of occupation. Unaffected and unaltered by modern day industrial developments and changing times, the indigenous traditional occupations of farming, animal husbandry and horticulture forms the backbone of the state economy. But in the last few decades, Agriculture in the state as well as the study area is receiving a set back and Horticulture is flourishing leaps and bounds. The present study aims to analyze various determinants responsible for this change. Climatic as well as field data was thoroughly analyzed to comprehend the situation. A Mann–Kendall test was done on the climatic data to support the hypotheses. It was observed that initially changing climatic trends proved to be the triggering factor supporting this change, but in due course of time, the determinants took an economic and psychological turn. The perusal of Indian Meteorological Data reveals an increasing trend of annual mean maximum temperature from 16.78 °C in 1985 to 17.58 °C in 1995 and an increase from 5.30 °C to 7.00 °C in the annual mean minimum temperature, and as such acting as a triggering factor for the land use conversion. Further, the mean annual rainfall shows a decrease from 100.75 mm in 1981 to 79.43 mm in 1991. The greater economic returns from horticulture as well as the changing behavioral patterns of people over the time further cemented its growth. The farmers have since persisted with the horticulture activity as it has proven to be an economically a much better lucrative enterprise.     

Electrical and electromagnetic surveys to locate possible causes of water seepage to ground surface at a quarry open pit near Helwan city,Egypt

Water seepage to ground surface at a limestone quarry located at Wadi Garawy about 20 km south-east of Helwan city in Egypt posed a real threat to the mining activity at the quarry. The quarry area is known to be very dry for decades and away from water utilities and infrastructures that may cause water leaks to the quarry. Geophysical investigation including 1D Vertical Electrical Sounding (VES), 2D Electrical Resistivity Tomography (ERT) and 1D Transient Electromagnetic (TEM) surveys were conducted to characterize the rock sequence and locate what could be a possible source of water seepage to the quarry. The resistivity profiles generated from the VES and TEM surveys mapped the rock units in the area down to depths exceeded 100 m. The ERT profiles acquired from the quarrying zone close to the water seepage spot have imaged the top of groundwater level at few meters below the ground surface at the quarry open pit. The spot of groundwater seepage seemed to occur at an area of limestone dissolution that were filled by finer sediments. The finer sediments acted as a hydrological conduit that allowed an upward seepage of groundwater to ground surface under the capillary action effect.     

Uncertainty as the overlap of alternate conditional distributions

An important task in modern geostatistics is the assessment and quantification of resource and reserve uncertainty. This uncertainty is valuable support information for many management decisions. Uncertainty at specific locations and uncertainty in the global resource is of interest. There are many different methods to build models of uncertainty, including Kriging, Cokriging, and Inverse Distance. Each method leads to different results. A method is proposed to combine local uncertainties predicted by different models to obtain a combined measure of uncertainty that combines good features of each alternative. The new estimator is the overlap of alternate conditional distributions.     

Temporal and Spatial Dynamics of Diel-Cycling Hypoxia in Estuarine Tributaries

The distribution and intensity of hypoxia (low dissolved oxygen) in estuaries is increasing worldwide due to cultural eutrophication. This study quantifies the strength of associations between the duration of diel-cycling severe hypoxia (≤2 mg O₂ l⁻¹) in bottom water (∼15 cm above bottom) of a shallow (<2 m) coastal lagoon estuary (Delaware, USA) and abiotic environmental variables (water temperature, insolation, tide, streamflow, and wind) and predicts the duration of severe hypoxia given different combinations of these variables. The intensity and spatial extent and dynamics of diel-cycling severe hypoxia events were defined. Vertical variability in dissolved oxygen (DO) concentration during the daytime was also determined. During the summers of 2001–2005, bottom DO data were collected for periods of weeks to months at multiple sites using automated sondes. Multiple linear regression (MLR) and regression tree analysis (RTA) were used to determine the relative importance of the environmental variables in predicting the number of hours of severe hypoxia per day. Key findings of the study were that severe hypoxia events of minutes to hours in duration occurred frequently in all four tributaries sampled, primarily between 0200 and 1000 hours. Severe hypoxia duration and diel-cycling amplitudes of DO concentration increased in the up-tributary direction. Hierarchically, the duration of severe hypoxia was influenced mostly by the mean daily water temperature, then by preceding days’ total insolation, percentage of morning hours (02:00 to 10:00 a.m.) ebb tide, and daily streamflow. Collectively, the variables examined by the MLR and the RTA approaches accounted for 62% and 65% of the variability in the duration of severe hypoxia, respectively. RTA demonstrated that daily mean water temperature above 26.3°C and previous day’s total insolation below 13.6 kW m⁻² were associated with the longest lasting severe hypoxic events (9.56 h). The environmental variables and combinations of conditions that modulate or augment diel-cycling hypoxia presented in this paper enhance understanding of this widespread and growing phenomenon and provide additional insight regarding the extent to which it can impact food webs in very shallow estuarine waters that often serve as nursery habitat.     

Relation between temperature changes of the mid-upper troposphere over Eurasian mid-high latitudes and solar irradiance in the twentieth century

The δ¹⁸O data obtained from an 18.7 m ice core drilled in Chongce Ice Cap at an elevation of 6,530 m a.s.l. in the West Kunlun Mountains on the northern Tibetan Plateau show a strong correlation with the summer temperature of the middle to upper troposphere over the mid-high latitudes of Eurasia. Based on this, the δ¹⁸O record can be used as a proxy of the June–September mean temperature of the mid-upper troposphere (MUT) from 1903 to 1992. The time span of the ice core record is much longer than the meteorological data available only after 1948. Using the empirical mode decomposition method (EMD), the δ¹⁸O record is decomposed into various frequency components and compared with the solar irradiance variations of the same period. The results show that (1) The June–September mean temperature of the MUT over Eurasian mid-high latitudes is completely decomposed into four IMF (intrinsic mode function) components and an increasing trend. (2) Solar irradiance is decomposed into the Schwabe cycle, the Hale cycle, the Gleissberg cycle, and an increasing trend. (3) The correlation coefficients between the June and September mean temperatures of the MUT over Eurasian mid-high latitudes and solar irradiance on the longer timescales (at least more than 11-year) show the significant correlations; their phase changes are basically identical in general, and (4) the 11-year Schwabe cycle exists in the June–September mean temperature of the MUT over Eurasian mid-high latitudes during most of the time from 1903 to 1992, and only in the two high-temperature phases (1929–1944 and from 1975 to the present) may global warming disturb this relation. A full understanding of this phenomenon would shed insight into the potential consequence of global warming on the MUT.     

PLL Tracking Performance in the Presence of Oscillator Phase Noise

The tracking performance of a Phase Lock Loop (PLL) is affected by the influence of several error sources. In addition to thermal noise and dynamic stress error, oscillator phase noise can cause significant phase jitter which degrades the tracking performance. Oscillator phase noise is usually caused by two different effects: Allan deviation phase noise is caused by frequency instabilities of the receiver's reference oscillator and the satellite's frequency standard. It can be termed as system-inherent phase noise and is relevant for both static and dynamic applications. “External” phase noise, however, is caused by vibration and is a major problem for dynamic applications. In the context of this paper, both types of phase noise will be modeled and the resulting integrals will be evaluated for PLLs up to the third order. Besides, phase jitter induced by thermal noise and signal dynamics will also be discussed, thus providing all necessary formulas for analyzing the performance of a phase lock loop in case of different forms of stress. Since the main focus is centered on the effects of oscillator phase noise, the overall PLL performance is graphically illustrated with and without consideration of oscillator phase noise. © 2002 Wiley Periodicals, Inc.     

Evaluation of the effect of river style framework on water quality: application of geomorphological factors

The Tarwal River basin with an area of 6560.20 km² is located in the eastern part of Iranian Kurdistan Province. This river crosses the Qorveh and Dehgolan plains and joins the Ghezel Ozan River in Zanjan Province. The importance of this river as a source for drinking water and agricultural and industrial uses in the region necessitates the need for research in this field. The main purpose of this study is to identify the natural features of the riverbed from the perspective of river geomorphology and to investigate their impact on water quality and river self-purification capacity. To achieve this, the river style framework was employed. To investigate the effects of each style framework on the river, a total of 20 samples from the entrance and outlet of styles were obtained using Impact Assessment method and sampling standards which were later analyzed for their quality parameters including T, pH, EC, TDS, TSS, Na, Ca, Mg, K, Cl, F, NO₂, NO₃, SO₄, PO₄, DO, COD and BOD. The results indicated that the changes in the styles lead to changes in water quality and the impact of each style is greater on the physical parameters than the chemical parameters. The river self-purification capacity varied depending on the style. The maximum and the minimum self-purifications occurred in fine-grained Anabranching and low-sinuosity fine-grained styles, respectively.     

Sulfur and selenium systematics of the subcontinental lithospheric mantle: Inferences from the Massif Central xenolith suite (France)

Selenium has been analyzed in addition to S in 58 spinel peridotite xenoliths collected in Cenozoic alkali basalts from the Massif Central (France). The S concentration range now available for this suite, calculated from 123 samples, is the largest ever reported for alkali basalt-hosted xenoliths (<3-592 ppm). Likewise, the Se concentrations range between 0.2 and 67 ppb. No partial melting signature can be identified from the S and Se systematic. Half of the analyzed xenoliths have lost S during supergene weathering. By contrast, neither surficial alteration, nor loss of chalcophile elements during eruption can explain the regional-scale variations of S and Se concentrations. A first group of lherzolite xenoliths sampled in Southern Massif Central, from volcanic centers older and spatially unrelated to the Massif Central plume that triggered the Cenozoic volcanism, contains between 20 and 250 ppm S (with occasional S concentrations up to 592 ppm) and 12-67 ppb Se. It is clear that the highest S values, originally interpreted as representing S abundances in the primitive mantle, were in fact enriched by metasomatism. Highly variable S and Se contents (<5-360 ppm; 9-52 ppb) have also been observed in peridotite xenoliths collected in the Northern Massif Central, from volcanic centers mostly older than the plume. Like Group I xenoliths, these Group II xenoliths were strongly metasomatized by volatile-rich carbonated/silicated melts which precipitated Cu-rich sulfides. A third group of xenoliths from Plio-Quaternary basalts spatially related to the Massif Central Plume are uniformly poor in S (10-60 ppm) and Se (9-29 ppb). In this Group III, poikiloblastic textured xenoliths have lost most of their S and Se budget by peridotite-melt interactions at high melt/rock ratios. Taken as a whole, the Massif Central xenolith suite provides further evidence for strong heterogeneities in the S and Se budget of the sub-continental lithospheric mantle. However, the few LREE-depleted fertile lherzolites that escaped strong metasomatic alterations suggest a S- and Se-depleted primitive mantle reservoir compared to currently accepted primitive mantle estimates.     

Output-only identification of the modal and physical properties of structures using free vibration response

The viability of a complete structural characterization of civil structures is explored and discussed. In particular, the identification of modal (i.e. natural frequencies, damping ratios and modal shapes) and physical properties (i.e. mass and stiffness) using only the structure’s free decay response is studied. To accomplish this, modal analysis from free vibration response only (MAFVRO) and mass modification (MM) methodologies are engaged along with Wavelet based techniques for optimal signal processing and modal reconstruction. The methodologies are evaluated using simulated and experimental data. The simulated data are extracted from a simple elastic model of a 5 story shear building and from a more realistic nonlinear model of a RC frame structure. The experimental data are gathered from shake table test of a 2-story scaled shear building. Guidelines for the reconstruction procedure from the data are proposed as the quality of the identified properties is shown to be governed by adequate selection of the frequency bands and optimal modal shape reconstruction. Moreover, in cases where the structure has undergone damage, the proposed identification scheme can also be applied for preliminary assessment of structural health.