Determination of the deformation properties of bedrock under turbine foundations

Summary This paper presents an improved investigation technique for in-situ determination of the deformation properties of rock masses, which are important parameters in the desing of foundations. This technique permits testing on a circular, one square metre area of the rock. In order to obtain reproducible loading conditions when testing, an equipment was introduced that gave almost uniformly distributed loading of the rock surface. This device is described in this paper. Displacement measurements are made in a central measuring hole, since a point of zero displacement, located equidistant between the loaded surface and the upward-pointing anchoring forces, offered a suitable reference point. In this way, the measuring device is also well protected against disturbing variations in temperature. During cyclic loading and unloading, charateristic load/deflection graphs are recorded, which directly demonstrate the deformation properties of the rock, such as the modulus of deformation at different loads, linearity deviation from linearity, as well as hysteresis effects and creep. It is clear that the results of the investigation apply only to the measuring point—the place at which the investigation was carried out. The properties of the rock nearby may vary considerably. The procedure for using this method of investigation for testing improvement measures for turbine foundations is shown in some examples.     

Precise GRACE baseline determination using GPS

Precision relative navigation is an essential aspect of spacecraft formation flying missions, both from an operational and a scientific point of view. When using GPS as a relative distance sensor, dual-frequency receivers are required for high accuracy at large inter-satellite separations. This allows for a correction of the relative ionospheric path delay and enables double difference integer ambiguity resolution. Although kinematic relative positioning techniques demonstrate promising results for hardware-in-the-loop simulations, they were found to lack an adequate robustness in real-world applications. To overcome this limitation, an extended Kalman Filter modeling the relative spacecraft dynamics has been developed. The filter processes single difference GPS pseudorange and carrier phase observations to estimate the relative position and velocity along with empirical accelerations and carrier phase ambiguities. In parallel, double difference carrier phase ambiguities are resolved on both frequencies using the least square ambiguity decorrelation adjustment (LAMBDA) method in order to fully exploit the inherent measurement accuracy. The combination of reduced dynamic filtering with the LAMBDA method results in smooth relative position estimates as well as fast and reliable ambiguity resolution. The proposed method has been validated with data from the gravity recovery and climate experiment (GRACE) mission. For an 11-day data arc, the resulting solution matches the GRACE K-Band Ranging System measurements with an accuracy of 1 mm, whereby 83% of the double difference ambiguities are resolved.     

An example of structural and metamorphic relationships in the Musgrave orogenic belt,central Australia

The western Musgrave Ranges are broadly divided into three groups of metamorphic rocks. A central granulite‐facies core is bounded on the north by rocks of amphibolite grade and on the south by rocks transitional between the granulite and amphibolite facies. Faults trending east‐west separate the three groups of rocks.

The detailed structural relationships between the granulites and the lower grade rocks are described and discussed. The granulites are structurally relatively simple and are characterised by the presence of a strong southwesterly‐plunging, mineral‐streaking lineation. In marked contrast, the transitional rocks are more complexly folded on a macroscopic scale and they also have a well‐developed mineral lineation plunging to the southeast. These two lineation orientations are considered to be directions of maximum elongation. The amphibolite‐facies rocks are also complexly folded and at least two lineations related to different phases of deformation have been recognized.

A suite of foliated and lineated dolerite dykes which occurs throughout the area inherited their fabric during a period of intense deformation and recrystallization, which resulted in the development of numerous mylonite zones.

It is suggested that the granulite‐facies rocks may represent a suite of cover rocks which have been thrust in a northerly direction over a pre‐existing amphibolite‐facies basement.     

Linking Cree hunters’ and scientific observations of changing inland ice and meteorological conditions in the subarctic eastern James Bay region, Canada

For the Cree First Nation communities of the eastern James Bay region in the Canadian Subarctic, local weather plays a key role in traditional subsistence activities. There is rising concern among the Cree about changes in inland ice conditions as they pose challenges to Cree livelihood, health and culture. Here we contrast Crees’ observations of inland ice conditions and long-term measurements obtained to foster interdisciplinary climate change research between scientists and Cree communities. We compiled qualitative observations of inland ice conditions and compared them with long-term measurements (> 25 years) of air temperature, precipitation and snow depth from three meteorological stations in the Cree territory. Cree hunters observed a weakening of lake ice cover (e.g., change in ice composition and structure, increased rain in winter). Trend analysis of long-term measurements showed a significant increase in mean autumn air temperature as well as in winter and autumn precipitation. By contrasting Cree hunters’ observations with climate data, we identified that an increase in fall and winter precipitation could be causing a weakening of inland ice through a change in its composition (i.e., snow ice instead of congelation ice). We conclude that Cree and scientific knowledge are complementary when investigating and understanding climate change in the Subarctic.     

Rare earth abundances in Deccan trap basalts

Twenty one basaltic flows of known mineralogical and chemical composition from the Deccan of western India have been analyzed for nine rare-earth elements (REE), together with Hf, Ta and Th by instrumental neutron activation methods. The flows, which are tholeiites and transitional alkali basalts, are relatively enriched in the Light REE and have total REE abundances systematically related to their bulk petrochemistry. The results are compared with REE abundances of basalts from other provinces.     

Mechanical resistance of coppice stems derived from full‐scale impact tests

Broadleaf coppice forests have the capacity to mitigate the threat posed by rockfall in many mountainous regions. Other forest types alike the rockfall protective effect is determined by the mechanical resistance of the coppice tree stems. In addition, the rockfall protective function of coppice forests is enhanced by specific stem aggregations (clumps) that have a rock interception and retention effect difficult to evaluate. The main objectives of this study are to quantify the mechanical resistance of small diameter coppice stems and to gain qualitative insight on breakage behavior. The aim is to supply data for more reliable assessments of the rockfall protective function of coppice forests with rockfall simulation models and to provide a basis for better estimating the rockfall protective effect of coppice clumps. To achieve these objectives we assessed the mechanical resistance of 73 beech (Fagus sylvatica L.) coppice stems using an impact pendulum device. We found an exponential relationship between the stem diameter at breast height (DBH) and mechanical resistance (loss of momentum or kinetic energy of the impactor during impact). Moreover, the results show that the high flexibility of the stems leads to relatively long lasting impacts and only negligible damage at the point of impact on the stem. As a result, the mechanical resistance of the stems is partly determined by impactor velocity and mass. These findings question the practicality of defining mechanical resistance by means of the change of momentum or energy of the impactor. Moreover, the results highlight the limits of upscaling or downscaling the data of this study to conclude for the mechanical resistance of beech trees of other than the tested dimensions. For the target DBH range the obtained dataset is nevertheless more reliable than data of previous studies, because the DBH specific impact process could be considered. Copyright © 2013 John Wiley & Sons, Ltd.     

COCORP: new perspectives on the deep crust

Summary. Relict sutures from colliding continents, regions characterized by a "young" Mono, layering and faulting throughout the crust, mid-crustal magma traps, and seismic "bright spots" which suggest deep crustal fluids are among recent COCORP findings. In addition, new studies of signal penetration, noise mitigation, recording geometry, and coherency filtering have yielded better understanding of, and substantial improvements in, data quality. Amplitude anomalies, or "bright spots", in the Basin and Range may be due to magma at mid-crustal levels; in one case, a normal fault appears to link the deep magma with young surface volcanics. Another bright spot. 15 km deep in southeastern Georgia, has a flat geometry that suggests a gas/liquid interface, perhaps within fluids underthrust along an Appalachian suture. The Mono continues to appear relatively undisturbed in many regions of past deformation, suggesting that its formation post-dates these major tectonic episodes. The diversity of reflection patterns from the U.S. Cordillera casts further doubt on the generality of the common model of a reflective, layered lower crust underlying a transparent upper crust.