Surface drag and turbulence over an inhomogeneous land surface

Data collected over an inhomogeneous semi-rural area are presented. The data are compared with previous surface-layer data to determine how representative the fixed-point flux measurements are of area averages. Departures from the standard surface-layer results are found to be relatively small (~10–20%), which supports the concept of a blending height above which the flow ceases to respond to variations in the underlying surface and becomes horizontally homogeneous.Effective roughness lengths are derived for different wind directions and the relationship between the effective roughness length and upwind surface is examined in the light of recent ideas on averaging surface roughness lengths. It is found that by averaging drag coefficients, realistic values of the effective roughness length can be calculated which are not very sensitive to the precise choice of the component roughness lengths.     

A note on the total mass of comets in the solar system

The assumption that the very low albedo determined for Halley's comet is typical of all short period comets, taken together with the assumption that the average sizes of long and short period comets are approximately equal, leads to an increase in the total mass of comets in the solar system by almost two orders of magnitude. If gravitational ejection from the Uranus - Neptune zone during the later phases of planet formation is indeed responsible for the classical Oort cloud between 10⁴–10¹⁵ AU, then the mass of comets in this transplanetary region during cosmogonie times has to exceed the combined masses of Uranus and Neptune by over an order of magnitude. Furthermore, if the recent arguments for as many as 10¹⁴ comets in an inner Oort cloud between ~40– 10⁴AU are valid, then the total mass of comets in the solar system approaches 2% of a solar mass.     

The skin friction in the unsteady free-convection flow past an accelerated plate

In this paper the unsteady laminar free-convection flow of a viscous incompressible fluid, past an accelerated infinite vertical porous plate subjected to a constant suction (or injection) in considered. Numerical results for the skin-friction on the plate are obtained for the class of accelerated motions whose velocity is of the formU ₀ t ⁿ wheret is time,U ₀ a constant, andn is a positive integer. The skin friction tends to zero with increasingt when the Grashof number Gr=², the Prandtl number =1,n=0, and >0 which corresponds to suction.On leave of absence from the Department of Mathematics, University of Dhaka, Bangladesh.On leave from absence from the Department of Mathematics, University of Dar-es-Salaam, Tanzania.     

Nuclear reactions on accreting neutron star surface

The production of X-rays and gamma-rays in bursts is believed to be due to the rapid burning of matter accreted onto a neutron star surface from its companion, most probably a giant star. The accreted matter consists mainly of hydrogen and helium and a very small amount of heavy elements. Due to the infall of matter, the temperature at the bottom layers is raised to a value of the order of 10⁸ K. The neutron star surface density is>10⁷ g cm^–3. As hydrogen burning is a slow process under any temperature and density conditions, we consider the helium-burning reactions as the source of gamma-rays in the neutron star surface. Under high-density conditions the ordinary laboratory reaction rates should become modified. At high-density conditions, the strong screening effect due to the polarising cloud of electrons around the ions become important and enhances the reaction rates considerably. The helium-burning reactions are calculated under such conditions. The abundances of helium-burning products such as¹²C, 1¹⁶O, and²⁰Ne, etc., are computed. Under high-density and temperature conditions carbon is found to be more abundant than oxygen. Neon is completely absent in almost all the relevant physical conditions in which a strong screening effect is operative. It is suggested that explosive burning of accreted helium of 10^–13 M will account for the observed energy of gamm-ray burst.     

Further analysis of temperature and emission measure during the decay phase of solar flares derived from soft X-ray light curves

The light curves of soft X-ray lines, observed by the Flat Crystal Spectrometer on Solar Maximum Mission during eight solar flares are modeled to determine the plasma temperature and emission measure as functions of time using the method first presented by Bornmann (1985, Paper I), but modified to include a ² search routine. With this modification the technique becomes more general, more accurate, and applicable throughout the gradual phase of the flare. The model reproduces the light curves of the soft X-ray lines throughout these flares. Model fits were repeated for each flare using five different sets of published line emissivity calculations. The emissivities of Mewe and Gronenschild (1981) consistenly gave the best fits to the observed light curves for each flare.     

A dynamo theory of solar flares

It is proposed that the solar flare phenomenon can be understood as a manifestation of the electrodynamic coupling process of the photosphere-chromosphere-corona system as a whole. The system is coupled by electric currents, flowing along (both upward and downward) and across the magnetic field lines, powered by the dynamo process driven by the neutral wind in the photosphere and the lower chromosphere. A self-consistent formulation of the proposed coupling system is given. It is shown in particular that the coupling system can generate and dissipate the power of 10²⁹ erg s^#X2212;1 and the total energy of 10³² erg during a typical life time (10³ s) of solar flares. The energy consumptions include Joule heat production, acceleration of current-carrying particles along field lines, magnetic energy storage and kinetic energy of plasma convection. The particle acceleration arises from the development of field-aligned potential drops of 10–150 kV due to the loss-cone constriction effect along the upward field-aligned currents, causing optical, X-ray and radio emissions. The total number of precipitating electrons during a flare is shown to be of order 10³⁷–10³⁸.     

Lithology and stratigraphy of the Ordovician facies complexes of Gornyi Altai

In the Ordovician time, the transform margin of the Gornyi Altai region consisted of two bathymetric stages: (1) shelf and upper parts of continental slope; (2) foothills and lower parts of continental slope. The first stage includes the shallow-water facies complexes (terrigenous and terrigenous-carbonate schlieren and variegated flyschoid), while the second stage is composed of deep-water (black shale terrigenous) and subflysch gray (carbonate terrigenous) complexes. Model series of the facies complexes established in our work should be taken into account during the geodynamic analysis of fold zones.     

The WRF model performance for the simulation of heavy precipitating events over Ahmedabad during August 2006

The summer monsoon season of the year 2006 was highlighted by an unprecedented number of monsoon lows over the central and the western parts of India, particularly giving widespread rainfall over Gujarat and Rajasthan. Ahmedabad had received 540.2mm of rainfall in the month of August 2006 against the climatological mean of 219.8mm. The two spells of very heavy rainfall of 108.4mm and 97.7mm were recorded on 8 and 12 August 2006 respectively. Due to meteorological complexities involved in replicating the rainfall occurrences over a region, the Weather Research and Forecast (WRF-ARW version) modeling system with two different cumulus schemes in a nested configuration is chosen for simulating these events. The spatial distributions of large-scale circulation and moisture fields have been simulated reasonably well in this model, though there are some spatial biases in the simulated rainfall pattern. The rainfall amount over Ahmedabad has been underestimated by both the cumulus parameterization schemes. The quantitative validation of the simulated rainfall is done by calculating the categorical skill scores like frequency bias, threat scores (TS) and equitable threat scores (ETS). In this case the KF scheme has outperformed the GD scheme for the low precipitation threshold.     

Asymmetrically zoned reaction rims: assessment of grain boundary diffusivities and growth rates related to natural diffusion-controlled mineral reactions

This study explores garnet coronas around hedenbergite, which were formed by the reaction plagioclase + hedenbergite→garnet + quartz, to derive information about diffusion paths that allowed for material redistribution during reaction progress. Whereas quartz forms disconnected single grains along the garnet/hedenbergite boundaries, garnet forms ～20‐μm‐wide continuous polycrystalline rims along former plagioclase/hedenbergite phase boundaries. Individual garnet crystals are separated by low‐angle grain boundaries, which commonly form a direct link between the reaction interfaces of the plagioclase|garnet|hedenbergite succession. Compositional variations in garnet involve: (i) an overall asymmetric compositional zoning in Ca, Fe²⁺, Fe³⁺ and Al across the garnet layer; and (ii) micron‐scale compositional variations in the near‐grain boundary regions and along plagioclase/garnet phase boundaries. These compositional variations formed during garnet rim growth. Thereby, transfer of the chemical components occurred by a combination of fast‐path diffusion along grain boundaries within the garnet rim, slow diffusion through the interior of the garnet grains, and by fast diffusion along the garnet/plagioclase and the garnet/hedenbergite phase boundaries. Numerical simulation indicates that diffusion of Ca, Al and Fe²⁺ occurred about three to four, four and six to seven orders of magnitude faster along the grain boundaries than through the interior of the garnet grains. Fast‐path diffusion along grain boundaries contributed substantially to the bulk material transfer across the growing garnet rim. Despite the contribution of fast‐path diffusion, bulk diffusion through the garnet rim was too slow to allow for chemical equilibration of the phases involved in garnet rim formation even on a micrometre scale. Based on published garnet volume diffusion data the growth interval of a 20‐μm‐wide garnet rim is estimated at ～10³–10⁴ years at the inferred reaction conditions of 760 ± 50 °C at 7.6 kbar. Using the same parameterization of the growth law, 100‐μm‐ and 1‐mm‐thick garnet rims would grow within 10⁵–10⁶ and 10⁶–10⁷ years respectively.