Oblique and near collision subduction, Sagami and Suruga Troughs —preliminary results of the French-Japanese 1984 Kaiko cruise, Leg 2

Leg 2 of the French-Japanese 1984 Kaiko cruise has surveyed the Suruga and the Sagami Troughs, which lie on both sides of the northwestward moving and colliding Izu-Bonin Ridge, the northernmost part of the Philippine Sea plate. The transition from the Nankai Trough to the Suruga Trough is characterized by northward decrease in width of the accretionary prism, in good agreement with the increasing obliquity between the through axis and the direction of the convergence, as the strike of the convergent boundary changes from ENE-NNE to south-north. South of the area, the southern margin of the Zenisu Ridge shows contractional deformations. This supports the interpretation made by the team of Leg 1 who studied the western extension of the area we studied, that it is an intra-oceanic thrusting of the ridge over the Shikoku Basin. In the Sagami Trough, where the relative motion is highly oblique to the plate boundary, active subduction is mostly confined in the east-west trending portions of the trough located south of the Boso Peninsula and along the lower Boso Canyon, near the TTT triple junction. In between, the present motion is mainly right-lateral along the northwest trending Boso escarpment. However, an inactive but recent (Pliocene to lower Pleistocene) accretionary prism exists south of the Boso escarpment, which suggests that the relative motion was more northerly than at present before about 1 Ma ago.     

Sea-floor fissures, biological communities and sediment fatty acids of the Northern Okushiri Ridge, Japan Sea: Implications for possible methane seepage

A biological community was discovered in the Northern Okushiri Ridge, northeastern Japan Sea. The community was closely associated with sea-floor fissures, and presumed to be supported by methanotrophic and/or thiotrophic bacterial production. Sediments inside of and in the vicinity of the fissures were collected, and the short-chain (C_9–20) sediment fatty acids were analyzed for amounts and compositions. The fatty acid compositions were compared with those from a known methane seep and a submarine volcano in the Sagami Bay, central Japan, and from a whale skeleton at the Torishima Seamount, northwestern Pacific Ocean. As a result, a close relationship between the sediments from the Northern Okushiri Ridge, the known methane-seep, and the whale skeleton was found. This finding represents the first discovery of methane seepage and associated biological communities in the Japan Sea. This also supports the hypothesis that the eastern margin of the northern Japan Sea is at the early stage of new subduction.     

Scaling laws between seismo-electric/magnetic fields and earthquake magnitude

The mechanisms generating the charges/potentials and abnormal electromagnetic radiation that accompany earthquakes have been discussed based on observational, theoretical and laboratory studies, in particular over the last few decades. We previously conducted stick‐slip tests using precut granite cores with a contact electrode on the sample side, and proposed that surface charges released from charge trapping centres on sheared asperities are a possible source of the above‐mentioned charges or potentials. Here we discuss seismo‐electric and magnetic fields formed by the surface charges, and derive their scaling laws with the earthquake magnitude at a distance. According to our model, detectability of these fields at a point on the ground surface depends strongly on wet/dry condition at a fault zone (sheared asperities).     

Status of butyltin pollution along the coasts of western Japan in 2001, 11 years after partial restrictions on the usage of tributyltin

Restrictions on the use of tributyltin (TBT) in aquaculture and on boats in coastal regions, except for ocean-going vessels, have been in place in Japan since 1990 due to the strong toxic effects of TBT on marine organisms. However, TBT pollution along the Japanese coasts has been reported after this legislation was enacted. In order to elucidate the present status of contamination by butyltin (BT) compounds, we measured the levels of BTs [monobutyltin (MBT), dibutyltin (DBT) and TBT] in seawater and Caprella spp. samples obtained from the western part of Seto Inland Sea, Uwa Sea and Uranouchi Bay in western Japan during March to September, 2001. Butyltins were detected in more than 90% of the seawater samples (n = 59), with average concentrations of 8.2 ± 9.2 (SD) ng MBT L⁻¹, 3.3 ± 3.0 ng DBT L⁻¹ and 9.0 ± 7.0 ng TBT L⁻¹. Among 41 stations situated on coastal lines, a sufficient number of Caprella organisms for chemical analysis could be collected from only 16 stations. The butyltin concentrations in seawater and Caprella samples from Uwa Sea and Uranouchi Bay, in which the dominant industry in both waters is aquaculture, showed significantly higher than or no significant differences from those samples from the western part of Seto Inland Sea, a major heavy-industry area in Japan. As the TBT concentration in seawater increased, the number of Caprella organisms collected decreased. The mean TBT concentration among the seawater samples was above the estimated lowest observable effect concentration (LOEC) that reduces the survival rate of Caprella danilevskii. Thus, the present study indicates that TBT is still a potential ecological hazard to the survival of marine invertebrates inhabiting coasts along western Japan, even 11 years after the partial ban on TBT usage was implemented.     

Studying air pollution with kitt peak solar flux atlas — analysis method and results of observation

For the measurement of atmospheric NO2 vertical column density (VCD), Kitt Peak Solar Flux Atlas can be substituted as an extraterrestrial solar radiation. Compared with differential analysis method, the Taylor expansion of integrated transfer equation underestimates the VCD. This underestimation is as large as 35% when the amount of NO2 is 1 × 1017 cm－2 and observation is conducted with an air mass factor of 10. Even when the VCD is 2 × 1016 cm－2 and the air mass factor is 4, the relative error of the retrieved VCD is still no less than 3%. If the observation is restricted under the small air mass factor condition (≤4), with Kitt Peak Solar spectrum as an extraterrestrial solar radiation, only an atmospheric layer of 2 km thick from ground can be studied, which will make the absorption too weak to be detected by normal instruments.The VCD in winter Tokyo area was observed and analyzed by differential method, which shows a good precision even when the absorption is as low as 3%. The largest average VCD was about 1.3 × 1017 cm－2, and the lowest was about 1.3 × 1016 cm－2. The trend of its variation was almost the same as the ground level observation by Saltzman reagent method.     

Studying Air Pollution with Kitt Peak Solar Flux Atlas—Analysis Method and Results of Observation

l.Introducti0nTwoflightsoftheSAGEIIIinstrumentwereplanedbeinglaunchedinJune2O00byRussianMeteor-3Mandin2002byInternationalSpaceStation(ISS).Itisexpectedthattheywouldofferinformationofalmostglobalcoverage.Theseinstrumentswillutilizetheselfcal-ibratingsolaroccultationtechniquetomeasureprofilesofaerosoIextinctionfrom0to4Okm,ozonefrom6to85km,nitrogendioxidefroml0to5Okm,andwatervaporfrom0to5Okm,andutilizelunaroccultationobservati0nstomonitorthekeynighttimesPecies,nitrogentrioxidefrom22to55k…     

Application of the Information Criterion to the Estimation ofGalaxy Luminosity Function

To determine the exact shape of the luminosity function (LF) of galaxies is one of the central problems in galactic astronomy and observational cosmology. The most popular method to estimate the LF is maximum likelihood, which is clearly understood with the concepts of the information theory. In the field of information theory and statistical inference, great advance has been made by the discovery of Akaike's Information Criterion (AIC). It enables us to perform a direct comparison among different types of model swith different numbers of parameters, and provides us a common basis of the model adequacy. In this paper we applied AIC to the determination of the shape of the LF. We first treated the estimation using stepwise LF(Efstathiou, Ellis and Peterson,1988), and derived a formula to obtain the optimal bin number. In addition, we studied the method to compare the goodness-of-fit of the parametric form (Sandage, Tamman and Yahil, 1979) with stepwise LF. This revised version was published online in July 2006 with corrections to the Cover Date.     

Three‐dimensional microstructure of samples recovered from asteroid 25143 Itokawa: Comparison with LL5 and LL6 chondrite particles

In this study, the three‐dimensional (3‐D) microstructure of 48 Itokawa regolith particles was examined by synchrotron microtomography at SPring‐8 during the preliminary examination of Hayabusa samples. Moreover, the 3‐D microstructure of particles collected from two LL6 chondrites (Ensisheim and Kilabo meteorites) and an LL5 chondrite (Tuxtuac meteorite) was investigated by the same method for comparison. The modal abundances of minerals, especially olivine, bulk density, porosity, and grain size are similar in all samples, including voids and cracks. These results show that the Itokawa particles, which are surface materials from the S‐type asteroid Itokawa, are consistent with the LL chondrite materials in terms of not only elemental and isotopic composition of the minerals but also 3‐D microstructure. However, we could not determine whether the Itokawa particles are purely LL5, LL6, or a mixture of the two. No difference between the particles collected from Rooms A and B of the sample chamber, corresponding to the sampling sequence of the spacecraft's second and first touchdowns, respectively, was detected because of the statistically small amount of particles from Room B.