The introduction of Sargassum muticum modifies epifaunal patterns in a Moroccan seagrass meadow

Marine macrophytes sustain valuable epiphytic biodiversity. Nonindigenous macroalgae may induce changes in composition and structure of epifaunal assemblages and therefore support different assemblages from those associated with native species. In this study, differences in faunal community structure between the introduced fucoid Sargassum muticum and the native seagrass Cymodocea nodosa were tested over a year on an intertidal shallow sandy bottom at the southern introduction front, the El Jadida coastline (NW Morocco). Epifaunal community structure consistently differed between macrophytes through seasons, with more species‐rich assemblages associated with S. muticum than C. nodosa despite comparable abundances. The significantly greater epifauna diversity on S. muticum may be related to its structural complexity. However, the species contributing most to differences in assemblages between both macrophytes, such as Steromphala umbilicalis and S. pennanti, were found on both habitats with temporally varying abundances. Some species‐specific affinities were detected (Stenosoma cf. acuminatum, Elasmopus vachoni, Chauvetia brunnea). Nitrogen, dissolved oxygen, suspended matter and temperature were identified as the best explanatory variables contributing to the observed macroepifaunal patterns. This study provides evidence that S. muticum acts as a favourable and additional habitat for epifaunal species and supports a more diverse epifaunal assemblage in this Moroccan seagrass meadow.     

Comparative Life Cycle Assessment of Two Types of Truck Bumper Produced in the Algerian Auto Industry

Currently, the reduction of weight in automotive is a very important topic to reduce the air pollution. In this context, the purpose of the present paper is to analyze a real case study through a comparison of the environmental impacts between a conventional steel bumper and a polyester prototype. In the first part of this work, a door-to-door life-cycle assessment methodology was used throughout the study of the component manufacturing phase. The SimaPro 7.1 software is used to evaluate the impacts of both bumpers on the environment and health. The second part is devoted to dust analysis from the polyester workshop. The obtained results have allowed us to show the company that its choice of steel substitution by the polyester is advantageous for certain impacts including the impact of climate change, but unfortunately there may be, given the working conditions of the polyester workshop, a transfer of impact, since we will end up with a risk of health (irritations, cancers) for the workers. LCA has proven to be a very useful tool for validating a redesigned automotive component from an environmental point of view; from this case study, several recommendations were made for the company to design environmentally friendly components, and ecodesign should be introduced into the company’s procedures.     

Hydrologic and geologic factors controlling groundwater geochemistry in the Turonian aquifer (southern Tunisia)

Water in the fissured limestone and dolomite of the Turonian aquifer of Tunisia has been investigated using geochemical (major ions) and isotopic (δ¹⁸O, δ²H, ¹⁴C) data. To carry out a characterization of aquifer behaviour, 48 representative samples were collected at the end of the humid season. The evolution of chemical composition of groundwater from recharge areas to discharge areas is characterized by increasing sodium, chloride and sulphate contents as a result of leaching of evaporite rock. In the study, three distinct chemical trends in groundwater were identified. The major reactions responsible for the chemical evolution of groundwater in the investigated area fall into three categories: (1) calcite precipitation, (2) gypsum and halite dissolution, and (3) ion exchange. The stable isotope composition of water samples indicates large-scale interaction between the Continental Intercalaire and the Turonian aquifer and the presence of a young local component which probably enters the system via faults and/or fractures.     

Une nouvelle méthode de cartographie de la région d’Oran (Algérie) à l’aide de la télédétection multispectrale

We have mapped the region of Oran, Algeria, using multispectral remote sensing with different resolutions. For the identification of objects on the ground using their spectral signatures, two methods were applied to images from SPOT, LANDSAT, IRS-1 C and ASTER. The first one is called Base Rule method (BR method) and is based on a set of rules that must be met at each pixel in the different bands reflectance calibrated and henceforth it is assigned to a given class. The construction of these rules is based on the spectral profiles of popular classes in the scene studied. The second one is called Spectral Angle Mapper method (SAM method) and is based on the direct calculation of the spectral angle between the target vector representing the spectral profile of the desired class and the pixel vector whose components are numbered accounts in the different bands of the calibrated image reflectance. This new method was performed using PCSATWIN software developed by our own laboratory LAAR. After collecting a library of spectral signatures with multiple libraries, a detailed study of the principles and physical processes that can influence the spectral signature has been conducted. The final goal is to establish the range of variation of a spectral profile of a well-defined class and therefore to get precise bases for spectral rules. From the results we have obtained, we find that the supervised classification of these pixels by BR method derived from spectral signatures reduces the uncertainty associated with identifying objects by enhancing significantly the percentage of correct classification with very distinct classes.     

Silicifications pédogénétiques dans les dépôts hamadiens du piémont de Boudenib (Maroc)

Résumé

— Le système de piémont atlasique du Sud marocain, d’âge tertiaire, est constitué dans le secteur de Boudenib de deux unités distinctes. La llamada de Boudenib forme l’unité inférieure et se caractérise par d’importants encroûtements carbonatés, riches en dolomite et attapulgite. L’unité supérieure de la llamada du Cuir marque une reprise de l’érosion et le dépôt de matériaux relativement peu altérés.

Des silicifications affectent les différents faciès de l’unité inférieure, ainsi que les grès crétacés sous-jacents, et jalonnent une surface d’érosion intra-fonnationnelle. Ces silicifications sont précoces, puisque remaniées dans les dépôts ultérieurs. Les illuviations d’opale et les accumulations gramdaires intercalées entre les concrétionnements successifs de silice attestent d’environnements pédologiques. La silicification plus forte vers la partie supérieure des coupes, ainsi que l’association fréquente des faciés silicifiés avec des niveaux hioturhés et altérés sont également à rapporter à des dispositions pédologiques. Ce sont des silcréles pédogénétiques.

L’étude micrographique montre que la silicification procède par épigénie des argiles et des carbonates, ainsi que par des cristallisations dans les vides. C’est à partir des vides existants (fentes, bioturbations et porosité intergranulaire) que se développe la silicification, montrant ainsi le rôle primordial des circulations. En particulier, l’épigénie des carbonates par la silice semble limitée par la diffusion de la silice à partir des vides, où le renouvellement des solutions est assuré. Les séquences de cristallisation des différentes formes de silice (allant de l’opale vers les quartz automorphes) peuvent être interprétées en terme d’évolution du milieu au cours de la silicification. Au fur et à mesure que des dépôts de silice se font sur les parois des vides, les solutions nourricières sont isolées de la roche encaissante, elles se chargent alors moins en cations étrangers, et la cristallisation de plus grands cristaux peut intervenir.

Les silicifications se développent pendant une période de stabilité tectonique et s’installent dans un paysage de glacis et sous des climats chauds à saisons alternées. Leur reconnaissance à l’échelle régionale peut constituer un repère lithostratigraphique précieux.     

Silicifications de nappe dans les formations carbonatées tertiaires du piedmont atlasique (Hamada du Guir,Maroc)

Résumé

Les formations tertiaires du système de piedmonts atlasiques du Sud marocain montrent de nombreuses silicifications qui affectent les différents faciès de la série : les grès calcaires, les conglomérats, les calcaires lacustres, aussi bien que les faciès plus argileux. Les accidents siliceux sont de tailles et de faciès variés, allant d’échardes millimétriques à des masses pluri-décimétriques. Dans les faciès argileux (torba), ce sont des plaquettes et des tubules de silice translucide. Dans les calcaires, ce sont surtout des faciès silexoïdes, à morphologies variées et à contours irréguliers. Dans les grès calcaires, ce sont des silicifications scoriacées, quelquefois disposées suivant un réseau de conduits anastomosés,

La pétrographie révèle que les dépôts de silice dans les vides forment une part importante des silicifications. Les silicifications translucides des faciès argileux sont entièrement formées de concrétions de calcédoine. Dans les grès calcaires, les silicifications résultent de la cimentation des grains de quartz détritiques par des dépôts de silice fibreuse et d’opale, après dissolution du ciment calcaire primaire. Dans les calcaires, certaines silicifications correspondent à la cimentation de micro-brèches karstiques par des quartz géodiques; même les plages qui apparaissent très homogènes, formées de quartz microcristallin, révèlent une porosité primaire importante. Il y a alternance de phases de dépôt de silice et de dissolution de la matrice calcaire. A côté de ces dépôts dans les vides existent aussi des épigénies, c’est à dire le remplacement de la matrice calcaire avec préservation des structures, sans formation de vides. Néanmoins, ces épigénies sont limitées à la bordure de vides à dépôts de silice.

Les silicifications sont dues à des processus diagénétiques tardifs. L’essentiel de la silice est constitué par des dépôts dans des vides ce qui permet de faire des hypothèses sur la nature des solutions nourricières. La régularité des dépôts tout autour des vides indique un milieu saturé, au sein d’une nappe. En raison de la solubilité relativement faible de la silice dans les eaux superficielles, des débits importants sont nécessaires pour renouveler constamment la silice précipitée des solutions. Ceci conduit à envisager des climats relativement humides à l’époque de la silicification, ainsi que l’existence de reliefs et de paysages incisés pour générer les écoulements de nappe suffisants.     

Seismic risk and damage prediction: case of the buildings in Constantine city (Algeria)

Located at the North-Eastern part of Algeria (Tellian Atlas), Constantine has crucial administrative, economic, scientific and cultural importance. It has continuously experienced significant urban evolutions during the different periods of its history. The city is located in an active seismic region within Algeria and has been struck in the past by several moderate and strong earthquakes. The strongest earthquake recorded since the beginning of instrumental seismology took place on October 27, 1985 with a magnitude M \(_\mathrm{S}=\) 5.9. Constantine presents a high seismic risk, because of its dense housing and high population density (2,374 inhabitants/km \(^{2})\) . This requires a risk assessment in order to take preventive measures and reduce the losses in case of potential major earthquake. For this purpose, a scenario based approach is considered. The building damage assessment methodology adopted for the Algerian context is adapted from HAZUS approach. In the present case, the effective Algerian seismic code response spectrum (RPA 99/2003) is considered as a seismic hazard model. The prediction of the expected damages is performed for a set of almost 29,000 buildings.     

Cs baseline levels in the Mediterranean and Black Sea: A cross-basin survey of the CIESM Mediterranean Mussel Watch programme

The common mussel Mytilus galloprovincialis was selected as unique biomonitor species to implement a regional monitoring programme, the CIESM Mediterranean Mussel Watch (MMW), in the Mediterranean and Black Seas. As of today, and upon standardization of the methodological approach, the MMW Network has been able to quantify ¹³⁷Cs levels in mussels from 60 coastal stations and to produce the first distribution map of this artificial radionuclide at the scale of the entire Mediterranean and Black Seas. While measured ¹³⁷Cs levels were found to be very low (usually <1 Bq kg⁻¹ wet wt) ¹³⁷Cs activity concentrations in the Black Sea and North Aegean Sea were up to two orders of magnitude higher than those in the western Mediterranean Basin. Such effects, far from representing a threat to human populations or the environment, reflect a persistent signature of the Chernobyl fallout in this area.     

Exchange of light rare earths for Ca in apatite

Diffusion experiments were carried out on natural apatite crystals that were immersed in molten light rare earth element (REE) chloride salt at temperatures between 900 and 1150 °C for periods up to 35 days. Electron microprobe analysis of the crystals showed that light REEs replaced Ca according to electronic balance, i.e. $\text{2}\text{REE}{}^{\mathrm{3+}}$ for $\text{3}\text{Ca}{}^{\mathrm{2+}}$. These diffusion profiles indicate that a maximum amount of substitution in the structure occurs when two of the ten Ca ions in apatite are replaced by the REE diffusing elements. Anisotropic diffusion is observed between a and c crystallographic directions. Comparison of maximum distance indicates that the larger ions move more easily in the apatite structure. We conclude that the light REEs diffuse within the channel structures of the mineral, and that this diffusion is controlled by the substitution type of elements in the calcium sites. To cite this article: A. Iqdari et al., C. R. Geoscience 335 (2003).