Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.     

Numerical simulations of deformation and movement of blocks within North China in response to 1976 Tangshan earthquake

Using methods of discontinuous deformation analysis and finite element (DDA+FEM), this paper simulates dynamic processes of the Tangshan earthquake of 1976, which occurred in the northern North China where its internal blocks apparently interacted. Studies focus upon both the movement and deformation of the blocks, in particular, the Ordos block, and variations of stress states on the boundary faults. The Tangshan earthquake was composed of three events: slipping motions of NNE-striking major fault, NE-striking fault near the northeastern end of the NNE-striking fault, and NW-striking fault on the southeastern side of the NNE-striking fault. Compared with previous studies, our model yields a result that is more agreeable with the configuration of aftershock distributions. A number of data are presented, such as the principle stress field during the earthquake, contours of the maximum shear stress, the strike-slip deformation between blocks near the earthquake focus, time-dependent variations of slips of earthquake-triggered faulting, the maximum slip distance, and stress drops. These results are in accord with the earthquake source mechanism, basic parameters from earthquake wave study, macro-isoseismic line, observed horizontal displacement vectors, etc. The Tangshan earthquake exerted different influences on the adjacent blocks and boundary faults between them, thus resulting in differential movement and deformation. The Ordos block seems to have experienced the small-scale counterclockwise rotation and deformation, but its northeast part, bounded on the east by the Taihangshan and on the north by the Yanshan and Yinshan belts, underwent relatively stronger deformation. The Tangshan earthquake also changed the stress state of boundary faults of the North China, leading to an increase in shear stress and a decrease in normal stress in the NW-trending Zhangjiakou-Penglai fault through Tangshan City and the northern border faults of the Ordos block, and therefore raises the potential risk of earthquake occurrence. This result is supported by the facts that a series of Ms ≥ 6 earthquakes took place at the northern margin of the Ordos block after the Tangshan earthquake.     

Active blocks and strong seismic activity in North China region

The active North China block consists of three second-order blocks: Ordos, North China Plain, and East Shandong-Huanghai Sea blocks. Two active tectonic zones, the Anyang-Heze-Linyi and Tangshan-Cixian zones, exist in the active North China Plain block and have separated the active block into 3 third-order active blocks, Taihangshan, Hebei-Shandong, and Henan-Huai blocks. The 3 third-order active blocks are characterized by their entire motion and are clearly different in their Cenozoic structures and deep structures. The active boundary tectonic zones between the third-order active blocks are less than those between the first- and second-order active blocks in their movement strength, extent, and seismic activity. The density of M· ·6 earthquakes in the boundary zones between active blocks is higher than that within the blocks by 9–22 times in the North China region, up to one order of magnitude on average. M· · 7 earthquakes occurred basically in the boundary zones between active blocks. The difference is not occasional, but reflects the nature of intraplate movement and the characteristics of strong seismic activity and is the powerful evidence for hypothesis of active blocks.     

Enhanced red fluorescence emission in the oxygen minimum zone of the Arabian Sea

 Depth profiles of fluorescence at several excitation and emission wavelengths were measured along with CTD data during the cruise So119 of RV Sonne in the Arabian Sea from 12 May to 10 June 1997. In addition to chlorophyll fluorescence from phytoplankton in the near-surface layer, the profiles in the oxygen minimum region well below the euphotic zone show enhanced red fluorescence. Red fluorescence intensity is inversely related to the oxygen concentration in intermediate and deep waters. A relationship to characteristic water masses of the region cannot be found in the data, and this holds also with chemical data such as DOC. Absorbance spectra of water samples taken in the oxygen minimum zone show an absorption band at 420 nm wavelength with about 50 nm bandwidth, much weaker than gelbstoff absorbance in the same wavelength range. The absorption band remains stable after sample filtration with 0.45 μm glass fibre filters. Hence, the size of the absorbing matter is in the range of dissolved molecules or particles much smaller than 1 μm. Fluorescence spectra of unfiltered samples with 420 nm excitation show a weak emission band at 600 nm and a more pronounced one at 660 nm wavelength. The trailing edge of the 660 nm band falls into the range of chlorophyll emission, thus giving rise to the observed depth profiles of red fluorescence in the oxygen minimum zone. Red fluorescence measured on samples remain stable during a few hours after sampling even in the presence of oxygen. It is not detectable after several weeks of sample storage in the dark and cannot be reproduced even after depletion of dissolved oxygen. Received: 22 May 2002 / Accepted: 18 February 2003 Responsible Editor: Andreas Oschlies Acknowledgements. This work was supported by a grant from the Federal Minister of Education and Technology, Bonn, within the frame work of the JGOFS Arabian Sea program. We are grateful to the captain and the crew of RV Sonne for their support. We are indebted to Mrs. Kirsten Neumann from the Institute of Marine Chemistry and Biogeochemistry of the University of Hamburg for providing the oxygen data, and to Mr. Nikolai Delling from the same institute for making the DOC and chlorophyll data available to us.     

On the circulation in the East Frisian Wadden Sea: numerical modeling and data analysis

 In this paper we use a combination of numerical modeling and data analysis to gain a better understanding of the major characteristics of the circulation in the East Frisian Wadden Sea. In particular, we concentrate on the asymmetry of the tidal wave and its modulation in the coastal area, which results in a complex pattern of responses to the sea-level forcing from the North Sea. The numerical simulations are based on the 3-D primitive equation General Estuarine Transport Model (GETM) with a horizontal resolution of 200 m and terrain-following vertical coordinates. The model is forced at its open boundaries with sea-level data from an operational model for the German Bight (German Hydrographic Office). The validation data for our model simulations include time series of tidal gauge data and surface currents measured at a pile in the back-barrier basin of the Island Langeoog, as well as several ADCP transects in the Accumer Ee tidal inlet. Circulation and turbulence characteristics are investigated for typical situations driven by spring and neap tides, and the analysis is focused on dominating temporal and spatial patterns. By investigating the response of five back-barrier basins with rather different morphologies to external forcing, an attempt is made to elucidate the dominating physical balances controlling the circulation in the individual sub-basins. It is demonstrated that the friction at the seabed tends to slow down the tidal signal in the shallow water. This leads to the establishment of flood dominance in the shallow sea north of the barrier islands. South of the islands, where the water volume of the channels at low tide is smaller than the tidal prism, the asymmetry of the tidal signal is shifted towards ebb dominance, a feature which is particularly pronounced at spring tide. At the northern open boundary, the tidal wave propagating from west to east generates a sea-level difference of ∼1 m along the boundary, and thereby triggers vigorous alongshore currents. The frictional control in the model is located in the inlets, as well as along the northern boundary. The correlation between velocity and turbulent kinetic energy tends to the establishment of a net southward transport, giving theoretical support to the observed accumulation of sediments on the intertidal flats. Weak turbulence along the northern shores of the barrier islands and the small magnitude of the residual currents there promote accumulation of suspended matter in these areas, although wave action will generally counteract this effect. Received: 29 May 2002 / Accepted: 26 September 2002 Responsible Editor: Jean-Marie Beckers Acknowledgements We are indebted to S. Dick for providing the data from the operational model of BSH and to B. Flemming for the useful discussions. The topography data and Fig. 1 have been prepared in cooperation with F. Meyer. Figure 2 has been prepared by G. Brink-Spalink. We also thank for the comments from an anonymous reviewer which helped to improve our paper.     

Tectonics of southwestern Mexico,isotopic evidence,nuclear Central America,Late Cretaceous break up

In the paleogeographic reconstruction of Mexico and northern Central America, an ever-increasing amount of evidence shows that the entire region is a collage of suspect terranes transported from abroad, whose timing and sense of motion are now beginning to be understood. Among these, the Chortis block (nuclear Central America) and the Baja California Peninsula have been proposed as pieces of continent separated from the Pacific coast of southwestern Mexico, that have moved either southeastward by the Farallon plate or northwestward by the Kula plate. Previous studies mainly confined to the northern margin of the Chortis block, confirmed a left-lateral displacement of 130 km in Neogene time. Further studies made northwestward along the Mexican coast provided a better understanding of magmatic and metamorphic processes in the area, and suggested times of detachment increased to 30 Ma, 40 Ma, and 66 Ma. The pre-detachment westernmost position of the block has changed, depending on the model chosen, from Puerto Vallarta and beyond, to the current position. Here we show that the isotopic mineral ages from coastal granites along the coast from Puerto Vallarta, Jalisco (80 Ma) to Puerto Angel, Oaxaca (11 Ma) record systematic decrease of cooling ages from NW to SE. This pattern is interpreted to result from the progressive uplift of rocks exposed at the present-day coast in that direction, such uplift occurred in response to the development of the Middle America Trench at the newly formed continental margin when the Chortis block was sliding at an average rate of 1.5 cm/year in a sinistral sense to its present position. Our results also constrain the position of the Kula-Farallon spreading axis north of Puerto Vallarta. These observations led us to conclude that several indicators point to this time and region for the onset of strike-slip drifting of the Chortis block toward its current position. Here, we also present several view points in terms of other possilble interpretations to different tectonic, geologic and isotopic data sets published recently by different authors.     

Torsionally coupled dynamic performance analysis of asymmetric offshore platforms subjected to wave and earthquake loadings

The dynamic equations of motion of asymmetric offshore platforms under three different environmental conditions:seismic action,wave action and their combination are established in this paper. In establishing these motion equations,three typical eccentricity types including mass eccentricity,rigidity eccentricity and their combination were considered,as are eccentricities that occur un-idirectionally and bi-directionally. The effects of the eccentricity type,the dynamic characteristics and the environmental conditions on the torsional coupling response of platforms are investigated and compared. An effort has also been made to analyze the inffluence of accidental eccentricity on asymmetric platforms with different eccentricity in two horizontally orthogonal directions. The results are given in terms of non-dimensional parameters,accounting for the uncoupled torsional to lateral frequency ratio. Numerical results reveal that the eccentricity type has a great inffluence on the torsionally coupled response under different environmental conditions. Therefore,it is necessary to consider the combination of earthquake and wave action in the seismic response analysis of some offshore platforms.     

Synchronous structure control of superlarge ore deposits

The control of synchronous structures on formation of superlarge stratabound ore deposits is immense. Based on studies of ore deposits in South Qiniing, northern Guangdong, Langshan and other areas, three new ideas in comparison with examples of ore control of synchronous structures both in China and abroad are proposed: (i) multiorder ore control of synchronous structures, which means that synchronous structures of different orders display different controls on ore deposits; (ii) synchronous structures in different stages of basin evolution display different controls on basin fluid system and ore-forming system; (iii) synchronous strurture accompanying hydrothermal mineralization as a preexisting weak surface in earth crust often reactivate in later tcctono-thermal event to be a channelway for magma or thermal fluids which superimposed on and reformed preexisting ore beds to form large or superlarge composite ore deposits.