Evaluation of Fragments from Disc Cutting of Dry and Saturated Sandstone

As the use of mechanical excavation in tunneling and mining activities expands, so has the use of disc cutters in various ground conditions. The impact of moisture content on rock behavior and rock excavation by disc cutters is examined in this study. This was done through a series of full-scale cutting tests using a 292 mm (11.5 in.) disc cutter in a moderate strength sandstone. The muck from the cutting tests was used to determine coarseness index (CI) and absolute size constant (x′). x′ was calculated using Rosin–Rammler distribution (or Weibull) curve, a statistical technique to look at the fragmented rock products. This approach is very popular among the mineral-processing professionals for the evaluation of the particle sizes of the comminution products. x′ and CI show a reasonable correlation with the specific energy of cutting and production rate. Both of these indicators were found to be dependent on the cut spacing and the interaction between the adjacent cuts, as anticipated. This paper explains the background information on this topic, reviews the laboratory testing, and offers analysis of the results of grain size distribution and its relationship with specific energy and cutting geometry. It should be noted that the experimental program was limited to only one rock type and additional testing on the other rock types is required to expand the results of the current study.     

Seasonal Dynamics of Phytoplankton and Environmental Factors around the Chagwi-do off the West Coast of Jeju Island,Korea

The dynamics of phytoplankton abundance with seasonal variation in physicochemical conditions were investigated monthly at 10 stations around the Chagwi-do off the west coast of Jeju Island, Korea, including inshore, middle shore, and offshore in the marine ranching area from September 2004 to November 2005. Water temperature varied from 12.1 to 28.9°C (average 18.8°C), and salinity from 28.9 to 34.9 psu (average 33.7 psu). The chlorophyll a concentration was 0.02-2.05 μg L¹ (average 0.70 μg L¹), and the maximum concentration occurred in the bottom layer in April. A total of 294 phytoplankton species belonging to 10 families was identified: 182 Bacillariophyceae, 52 Dinophyceae, 9 Chlorophyceae, 12 Cryptophyceae, 6 Chrysophyceae, 4 Dictyophyceae, 13 Euglenophyceae, 6 Prymnesiophyceae, 5 Prasinophyceae, and 5 Raphidophyceae. The standing crop was 2.21-48.69x10⁴ cells L¹ (average 9.23x 10⁴ cells L¹), and the maximum occurred in the bottom layer in April. Diatoms were most abundant throughout the year, followed by dinoflagellates and phytoflagellates. A phytoplankton bloom occurred twice: once in spring, peaking in April, and once in autumn, peaking in November. The spring bloom was represented by fourChaetoceros species andSkeletonema costatum; each contributed 10–20% of the total phytoplankton abundance. The autumn bloom comprised dinoflagellates, diatoms, and phytoflagellates, of which dinoflagellates were predominant.Gymnodinium conicum, Prorocentrum micans, andP. triestinum each contributed over 10% of the total phytoplankton abundance.     

Simulation of vortex-induced vibrations of a cylinder using ANSYS CFX

In this paper, vortex-induced vibrations of a cylinder are simulated by use of ANSYS CFX simulation code. The cylinder is treated as a rigid body and transverse displacements are obtained by use of a one degree of freedom spring damper system. 2-D as well as 3-D analysis is performed using air as the fluid. Reynolds number is varied from 40 to 16000 approx., covering the laminar and turbulent regimes of flow. The experimental results of （Khalak and Williamson, 1997） and other researchers are used for validation purposes. The results obtained are comparable.     

Origin of wehrlite cumulates in the Moho transition zone of the Neoproterozoic Ras Salatit ophiolite,Central Eastern Desert,Egypt: crustal wehrlites with typical mantle characteristics

Ultramafic cumulates, mainly crustal true wehrlites, were discovered and described in the mantle–crust transition zone (MTZ) and the extremely lower layered gabbro sequence of the Ras Salatit ophiolite, Central Eastern Desert, Egypt. They form either boudinaged lensoidal tabular bodies or interdigitated layers often concordant with the planolinear fabrics of the Ras Salatit ophiolite rocks. The contact between wehrlites and the host MTZ dunite or layered gabbro is razor sharp, lobate and/or sinuous, without chilled margins or any visible deformations. The Ras Salatit wehrlites are orthopyroxene-free and composed mainly of olivine and clinopyroxene. They are texturally equilibrated and show a characteristic poikilitic texture. Crystallization order of the Ras Salatit wehrlites is olivine/spinel followed by clinopyroxene with the absence of plagioclase. Olivine and clinopyroxene of the Ras Salatit wehrlites are compositionally uniform and conspicuously high in Mg#, mostly around 0.93 and 0.92, respectively. Moreover, the clinopyroxene shows low Ti and Al contents coupled with marked depletion in LILE. The calculated melt in equilibrium with clinopyroxene from the Ras Salatit wehrlites is largely similar to lavas from the Izu-Bonin forearc. Given the above characteristics, the Ras Salatit wehrlites were produced by crystal accumulation from a hydrous depleted basaltic/tholeiitic melt corresponding to temperatures between 1,000 and 1,100°C at the oceanic crustal pressure (~2 kbar). The involved hydrous tholeiitic melt has been probably formed by fluid-assisted partial melting of a refractory mantle source (similar to the underlying harzburgites) in a somewhat shallow sub-arc environment.     

Generation of stochastic earthquake ground motion in western Saudi Arabia as a first step in development of regional ground motion prediction model

Earthquake ground motion model is an essential part of seismic hazard assessment. The model consists in several empirical ground motion prediction equations (GMPEs) that are considered to be applicable to the given region. When the recorded ground motion data are scarce, numerical modeling of ground motion based on available seismological information is widely used. We describe results of stochastic simulation of ground motion acceleration records for western Saudi Arabia. The simulation was performed using the finite fault model and considering peak ground acceleration and amplitudes of spectral acceleration at natural frequencies 0.2 and 1.0 s. Based on the parameters of the input seismological model that were accepted in similar previous studies, we analyze influence of variations in the source factor (stress drop) and in the local attenuation and amplification factors (kappa value, crustal amplification). These characteristics of the model are considered as the major contributors to the ground motion variability. The results of our work show that distribution of simulated ground motion parameters versus magnitude and distance reveals an agreement with the GMPEs recently used in seismic hazard assessment for the region. Collection of credible information about seismic source, propagation path, and site attenuation parameters using the regional ground motion database would allow constraining the seismological model and developing regional GMPEs. The stochastic simulation based on regional seismological model may be applied for generation of ground motion time histories used for development of analytical fragility curves for typical constructions in the region.     

Impacts of human activities on the sedimentological and geochemical characteristics of Mabahiss Bay, North Hurghada, Red Sea, Egypt

In Mabahiss Bay, north Hurghada City, Red Sea, Egypt, the bathymetric measurements show the irregular topography of the bottom. The bottom sediments are mainly composed of sand fractions (average 73.5%). Gravel and sand contents decrease with depth. On the other hand, silt and clay percents show indirect relation with depth. Abnormally, there are some spots found near the coast where the percent of both silt and clay increases. They also show carbonate sediments (average 90.15%) increasing toward the bay center. The narrow belt adjacent to the shore area has lower carbonate content reflecting the effect of clastic sediments input into the area. The sediments in the study area have more than one source as indicated from the results of the mechanical analysis. Wide range of grain size distributions, clay spots and low carbonate content near the shore indicate change in the nature of sedimentary environment (i.e., pollution) which may be caused by land filling accompanied with urbanization and building of touristic resorts and centers. The organic matter content in the sediments is much higher than that of the other areas in the Red sea (average 4.8%) with considerable accumulation in the inner most parts of the bay. This may be due to relative abundance of organic productivity, direct discharge of domestic waste in some spots along the coast of the study area, and/or local contamination of hydrocarbons (i.e., tar balls thrown out on shore by weak waves through the few inlets of the study area). The average concentrations of lead, nickel, copper, and cadmium are 44, 34, 51, and 3.1?ppm, respectively. The suggested origin of these metals is either organic (localized oil pollution), or using of antifouling and anticorrosive paints from fishing and tourist boats. Other metals, particularly manganese (average 77?ppm), cobalt (average 51?ppm), and zinc (average 16?ppm) as well as sodium (average 0.32%) and potassium (av. 0.10%) show a common trend of increasing concentration toward the outermost parts of the bay. Some parts along shoreline have increasing concentrations, even if these parameters having a common trend of increase towards the center of the bay. This may be either due to sewage and wastewaters discharges from many outlets of tourist centers and fishermen and cargo boats, and/or terrestrial sediments input. Direct comparison of the present levels of heavy metals in Mabahiss Bay with other published data along the Red Sea and Gulf of Suez shows that the study area has higher concentrations. Dredging, land filling, localized oil pollution, using of antifouling and anticorrosive paints from fishing and tourist boats (where the bay is used as harbor for many of fishermen and cargo boats), sewage, variable amounts of municipal wastewater from many outlets of tourist centers considered to be the sources of pollution within Mabahiss bay. There are many effects of pollution on Mabahiss Bay environment among which: (1) death of fishes, seaweeds, birds, marine mammals, etc., (2) damage of beaches and other recreational areas, (3) damage of marine ecosystem by eliminating or decreasing population of certain species, (4) hazard to human from ingesting contaminated food, and more.     

孟加拉国农业利用强度增加、土地利用/覆盖变化和土地退化

在实地采访、地块土地利用/覆盖调查和1 260个土样的收集和实验室分析等野外工作的基础上,对比分析了1984—1985年和2003—2004年265个家户的人口、农业系统、土地利用和土壤质量数据,研究了孟加拉国6个村庄农业诱导强度增强对土地和土壤质量的影响。1984—2004年家户和土质数据的百分比变化用来构建诱导强度增强模型和土地退化模型中的统计变量和土地退化指标。结果表明：研究区种植强度和土地生产力的增加主要是由于低压泵灌溉的普及,化肥和杀虫剂的使用以及水稻、蔬菜和虾生产的多元化高产。诱导强度增强模型可以解释研究区81%的种植强度增量和73%的土地生产力增量。人口压力和市场驱动也诱发了农业利用强度的增加;环境约束起到了一定制约作用;低压泵灌溉等应对干旱的技术也对农业增产有一定贡献。然而动力耕作机、低压泵灌溉和化学物质的持续利用再加上除草性水稻、蔬菜和虾的频繁耕作和养殖已经导致土壤结构、质地和化学属性的退化,生产力也有所降低。利用强度越大的土地退化现象越严重,生产力下降得也更多。土地的不断退化将有可能会引发孟加拉国的马尔萨斯危机。     

Adaptive state estimation of groundwater contaminant boundary input flux in a 2-dimensional aquifer

In many circumstances involving heat and mass transfer issues,it is considered impractical to measure the input flux and the resulting state distribution in the domain.Therefore,the need to develop techniques to provide solutions for such problems and estimate the inverse mass flux becomes imperative.Adaptive state estimator(ASE)is increasingly becoming a popular inverse estimation technique which resolves inverse problems by incorporating the semi-Markovian concept into a Bayesian estimation technique,thereby developing an inverse input and state estimator consisting of a bank of parallel adaptively weighted Kalman filters.The ASE is particularly designed for a system that encompasses independent unknowns and/or random switching of input and measurement biases.The present study describes the scheme to estimate the groundwater input contaminant flux and its transient distribution in a conjectural two-dimensional aquifer by means of ASE,which in particular is because of its unique ability to efficiently handle the process noise giving an estimation of keeping the relative error range within 10%in 2-dimensional problems.Numerical simulation results show that the proposed estimator presents decent estimation performance for both smoothly and abruptly varying input flux scenarios.Results also show that ASE enjoys a better estimation performance than its competitor,Recursive Least Square Estimator(RLSE)due to its larger error tolerance in greater process noise regimes.ASE's inherent deficiency of being slower than the RLSE,resulting from the complexity of algorithm,was also noticed.The chosen input scenarios are tested to calculate the effect of input area and both estimators show improved results with an increase in input flux area especially as sensors are moved closer to the assumed input location.