Potential pollution of groundwater in the valley of the Seybouse River,north-eastern Algeria

In north-eastern Algeria, the Seybouse River is an important source of water used mainly for irrigation of large agricultural areas extending from the Guelma region to Annaba city. Industrial activities in this region contribute substantial water pollution to the river and the groundwater. Based on the different sources of pollution, mapping of areas vulnerable to groundwater pollution has been accomplished by combining land use and data on groundwater levels. The resulting maps show that the most vulnerable areas are those with large industrial activities—in Meboudja, Bouchegouf and Guelma. Infiltration and runoff contribute to pollution, and the highest infiltration rate is generally observed in areas of agricultural and industrial activities. Pollution of the aquifers in this area is of concern. Mountains, such as the Edough and Gelaat Bou Sbaa, contribute high runoff that carries pollutants towards the groundwater.     

A 48-kyr-long slip rate history for the Jordan Valley segment of the Dead Sea Fault

We investigate the late Quaternary active deformation along the Jordan Valley segment of the left-lateral Dead Sea Fault and provide new insights on the behaviour of major continental faults. The 110-km-long fault segment shows systematic offsets of drainage systems surveyed at three sites along its southern section. The isotopic dating of six paleoclimatic events yields a precise chronology for the onset of six generations of gully incisions at 47.5 ka BP, 37.5 ka BP, 13 ka BP, 9 ka BP, 7 ka BP, and 5 ka BP. Additionally, detailed mapping and reconstructions provide cumulative displacements for 20 dated incisions along the fault trace. The individual amounts of cumulative slip consistently fall into six distinct classes. This yields: i) an average constant slip rate of 4.7 to 5.1 mm/yr for the last 47.5 kyr and ii) a variable slip rate ranging from 3.5 mm/yr to 11 mm/yr over 2-kyr- to 24-kyr-long intervals. Taking into account that the last large earthquake occurred in AD 1033, we infer 3.5 to 5 m of present-day slip deficit which corresponds to a Mw  7.4 earthquake along the Jordan Valley fault segment. The timing of cumulative offsets reveals slip rate variations critical to our understanding of the slip deficit and seismic cycle along major continental faults.     

Toward an Ecological Explanation of Agricultural Unemployment in Bangladesh

Cultural ecology theoretical framework was found suitable to explain unemployment in agriculture in three villages in Bangladesh. Path analysis and multiple regression statistics were used to examine the direct, indirect, and total effects of eight independent human, social, environmental, and technology variables as well as their aggregate contribution on agricultural unemployment. The multiple regression model explains 86.2% of the total variation in unemployment in agriculture; they were followed by environmental constraints and labor saving technology variables.     

A proposed structure–groundwater model: application to chalky media of the Paris Basin

The groundwater flow in a fissured chalky environment at the northern border of the Paris Basin depends on several geological and hydrogeological parameters. Although the studied sector of the basin presents a homogeneous rock type, it is affected by a fracture network. In this type of environment, in which the permeability is low, the groundwater flow displays significant disruption, which is localized in the Fruges region (northern France). The interconnection of the discontinuities (network of fault and/or joints) is reliant on the structural control of groundwater flow through increases in the hydraulic connection between the unsaturated and the saturated zone. The methodology developed herein makes use of microstructural and regional analysis of the fracture patterns, and allowed consideration of the piezometric variations of the chalk aquifer during periods of low and high groundwater levels (April and October 2001) and a diagraphic representation of the estimated physical parameters (electrical resistivity). This enabled us to construct a ‘flow structure’ conceptual model in which we identify two types of faults: tight walls and flow paths that control the piezometric heads and the flow rate. Model validation was carried out on a similar sector. Copyright © 2007 John Wiley & Sons, Ltd.     

Rock slope stability and design in Arafat–Muzdalifa area,Saudi Arabia

The present contribution is a complete study extending before, during, and after the excavation of the mountain side that lying north of road 7. It includes slope stability analysis, rock cut design, and rockfall modeling for natural slope and rock cut face. Neoproterozoic granodiorite and biotite granite forming the slope body have medium to very high strengths. Mineral compositions and textures of these intact rocks control the strength values. These rocks are intensively dissected by fractures that are filled with montmorillonite and chlorite. The high plasticity and slippery nature of these filling materials represent the main problem that may face a rock cut designer because they damage the mechanical properties of these fractures. The problem begins with the selection of the rock mass classification that deals with the fracture fillings and extends during the stability analysis and the suggestion of mitigation and supporting measures. The rock masses building the natural slope are suffered by plane, wedge, and toppling failures. Therefore, two rock cut designs are suggested to avoid the hazards related to these failures and considering the construction cost as well. Rockfall modeling for the natural slope and rock cut designs was done to assess the hazards related to these falling of the blocks. The kinetic energy of falling blocks is represented on the roadway by the coverage distance and block rebound amplitude. Slope height has a positive effect on the values of these distance and amplitude, whereas the steepness of berm height has a negative effect on them. Coverage distance is a function to the location of rockfall barrier and to the width of road ditch, while the amplitude controls the barrier height.     

Conjunctive use of surface water and groundwater via the bank infiltration method

The bank infiltration (BI) technique may be a viable option if the local climate, hydrological, and geological conditions are conducive. This study was specifically conducted to explore the possibility of using BI to source the polluted surface water in conjunction with groundwater. Three major factors were considered for evaluation: (1) investigation on the contribution of surface water through BI, (2) input of local groundwater, and (3) water quality characteristics of water supply. Initially, the geophysical method was employed to define the subsurface geology and hydrogeology, and isotope techniques were performed to identify the source of groundwater recharge and interaction between surface water and groundwater. The physicochemical and microbiological parameters of the local surface water bodies and groundwater were analyzed before and during water abstraction. Extracted water revealed a 5 %–98 % decrease in turbidity, as well as HCO₃ ⁺, SO₄ ^?, NO₃ ^?, Al, As, and Ca concentration reduction compared with those of Langat river water. However, water samples from test wells during pumping show high concentrations of Fe²⁺ and Mn²⁺. In addition, amounts of Escherichia coli, total coliform, and Giardia were significantly reduced (99.9 %). Pumping test results indicate that the two wells (DW1 and DW2) were able to sustain yields.     

Multi-factor impact analysis of agricultural production in Bangladesh with climate change

Diverse vulnerabilities of Bangladesh's agricultural sector in 16 sub-regions are assessed using experiments designed to investigate climate impact factors in isolation and in combination. Climate information from a suite of global climate models (GCMs) is used to drive models assessing the agricultural impact of changes in temperature, precipitation, carbon dioxide concentrations, river floods, and sea level rise for the 2040–2069 period in comparison to a historical baseline. Using the multi-factor impacts analysis framework developed in Yu et al. (2010), this study provides new sub-regional vulnerability analyses and quantifies key uncertainties in climate and production. Rice (aman, boro, and aus seasons) and wheat production are simulated in each sub-region using the biophysical Crop Environment REsource Synthesis (CERES) models. These simulations are then combined with the MIKE BASIN hydrologic model for river floods in the Ganges-Brahmaputra-Meghna (GBM) Basins, and the MIKE21 Two-Dimensional Estuary Model to determine coastal inundation under conditions of higher mean sea level. The impacts of each factor depend on GCM configurations, emissions pathways, sub-regions, and particular seasons and crops. Temperature increases generally reduce production across all scenarios. Precipitation changes can have either a positive or a negative impact, with a high degree of uncertainty across GCMs. Carbon dioxide impacts on crop production are positive and depend on the emissions pathway. Increasing river flood areas reduce production in affected sub-regions. Precipitation uncertainties from different GCMs and emissions scenarios are reduced when integrated across the large GBM Basins’ hydrology. Agriculture in Southern Bangladesh is severely affected by sea level rise even when cyclonic surges are not fully considered, with impacts increasing under the higher emissions scenario.     

Seasonal variations and mechanisms of groundwater nitrate pollution in the Gaza Strip

Nitrate represents one of the major pollutants of groundwater in the Gaza Strip. Several cases of blue babies disease were reported in the last couple of years. The present study is an investigation of the seasonal variations in nitrate concentration to better understand the mechanisms and parameters controlling this perilous pollutant. Nitrate was analysed in 100 wells (47 agricultural and 53 domestic) in five governorates. The results showed that 90% of the tested wells have nitrate far beyond the allowed values set by the World Health Organization (WHO). The average concentration of nitrate in domestic wells is 128 mg/L in June-July and 118 mg/L in Jan-Feb, and for the agricultural wells, the average is 100 mg/L in June-July, and 96 mg/L for Jan-Feb. The results suggest that the seasonal differences in nitrate concentrations of the domestic wells are slightly more observable than those of the agricultural wells. The environmental factors that control nitrate in groundwater are: a partially-confined aquifer, lack of a sewage system, population density, the presence of refugee camps, the presence of fertilizers and the annual rain. The variations in nitrate concentration of the domestic wells are not of considerable values. It is suggested that concrete policies in pollution control and/or prevention measures could be formulated upon better understanding of the environmental factors.     

The use of watershed geomorphic data in flash flood susceptibility zoning: a case study of the Karnaphuli and Sangu river basins of Bangladesh

Natural Hazards - The occurrence of heavy rainfall in the south-eastern hilly region of Bangladesh makes this area highly susceptible to recurrent flash flooding. As the region is the commercial...     

Sedimentary and geochemical evidence of Eocene climate change in the Xining Basin,northeastern Tibetan Plateau

The northeastern Tibetan Plateau began to grow during the Eocene and it is important to understand the climatic history of Asia during this period of so-called ‘doubthouse' conditions. However, despite major advances in the last few decades,the evolutionary history and possible mechanisms of Eocene climate change in the northeastern Tibetan Plateau remain unclear.The Xining Basin in the northeastern Tibetan Plateau contains a continuous sequence of Early to Late Eocene non-marine sediments which provides the opportunity to resolve long-term climate changes during this period. In this study, we report the results of analyses of lithofacies, sediment color and geochemistry of bulk samples collected from the Xijigou section of the Xining Basin. An abrupt lithofacies change between the Early(~52–40 Ma) and Late Eocene(~40–34 Ma) indicates a change in the depositional environment from a shallow lake to a playa lake in response to a significant climatic shift. During ~52–40 Ma,higher values of sediment redness(a*), redness/lightness(a*/L*) and higher modified Chemical Index of Weathering(CIW′)indicate a relatively warm and humid climate, while from ~40–34 Ma the lower values of a*, a*/L*and lower CIW′ imply subhumid to semi-arid climatic conditions. The paleoclimatic records indicate a long-term(~52–34 Ma) trend of decreasing chemical weathering, consistent with global climate change. An abrupt sharp excursion of the proxy records during ~42–40 Ma suggests a relatively brief warm interval, corresponding to the Middle Eocene Climatic Optimum(MECO). We suggest that global cooling substantially reduced humidity in inner Asia, resulting in sub-humid to semi-arid climatic conditions after 40 Ma in the Xining Basin, which may have been responsible for the long-term trend of decreasing chemical weathering during the Eocene.