Long-term precipitation and stream discharge records at seven forested experimental watersheds along a latitudinal transect in Japan: Jozankei,Kamabuchi, Takaragawa,Tsukuba, Tatsunokuchi-yama,Kahoku and Sarukawa

This data note introduces a database of long-term daily total precipitation and stream discharge data for seven forested watersheds in Japan that have been continuously monitored by the Forestry and Forest Products Research Institute. Three of the watersheds started data collection in the 1930s. Forest cover across the sites ranges from cool to warm temperate regions with the latitude spanning from 31 to 44° N and annual precipitation ranging from 1200 to 3000 mm yr⁻¹. The effects of vegetation change via clearcutting, thinning and forest fire (among other stressors) on stream discharge can be analysed from the long-term observation sites. Moreover, this multi-site dataset allows for inter- and intra-site comparisons of annual water loss (difference of annual precipitation and stream discharge). These long-term datasets can provide comprehensive insights into the effects of climate change and other stressors on forested ecosystems, not only in Japan but across a spectrum of forest types, if combined with other long-term records from other forested watersheds across the world.     

A pair of Langmuir cells in two laboratory tanks (II) on generation mechanism

Vertical and cross-wind profiles of mean currents were measured systematically in vertical cross-sections of two wind-wave tanks with aspect ratios of order one to study the secondary flow in the tanks. A pair of Langmuir cells turned out to be driven by a close combination of the pressure gradient along the tank and the side-wall effects. That is, part of the adverse pressure gradient produced a parabolic cross-wind profile with the smallest downwind current at the centerline and the largest current along the two sidewalls. As a result, upwelling occurred in the center zone where the return flow was strongest, probably because of the entrainment action of the wind-driven current. In order to compensate for this upwelling, downwelling occurred along the two side-walls from the flow continuity. The resulting vertical circulation formed a pair of Langmuir circulations across the span and served to maintain the parabolic profile formed by the pressure gradient. A positive feedback mechanism is thus found between the primary and secondary circulations through upwelling of the return flow in the center zone. Vertical shears of the span-averaged downwind current measured in two tanks were found to be systematically different from each other. This difference seems to depend on the magnitude of the advective Reynolds stresses in the two tanks.     

Correction of atmospheric effect on ADEOS/OCTS ocean color data: Algorithm description and evaluation of its performance

This paper first describes the atmospheric correction algorithm for OCTS visible band data used at NASDA/EOC. Sharing a basic structure with Gordon and Wang’s Sea WiFS algorithm, it uses 10 candidate aerosol models including the “Asian dust model” introduced in consideration of the unique feature of aerosols over the east Asian waters. Based on the observations at 670 and 865 nm bands, the algorithm selects a pair of aerosol models that account best for the observed spectral reflectances, and synthesizes the aerosol reflectance used for the atmospheric correction. Two different schemes for determining the value of the parameter for the aerosol model selection are presented and their anticipated estimation error is analyzed in terms of retrieved water reflectance at 443 nm. The results of our numerical simulation show that the standard deviation of the estimation error of the “weighted average” scheme is mostly within the permissible level of ±0.002, reducing the error by 18% on average compared to the “simple average” scheme. The paper further discusses the expected error under the old CZCS-type atmospheric correction, which assumes constant aerosol optical properties throughout the given image. Although our algorithm has a better performance than the CZCS algorithm, further analysis shows that the error induced by the assumption taken in the algorithm that the water-leaving radiance at 670 nm band is negligibly small may be large in high pigment concentration waters, indicating the necessity for future improvements.     

Two extraterrestrial dust horizons found in the Dome Fuji ice core,East Antarctica

Two silicate-rich dust layers were found in the Dome Fuji ice core in East Antarctica, at Marine Isotope Stages 12 and 13. Morphologies, textures, and chemical compositions of constituent particles reveal that they are high-temperature melting products and are of extraterrestrial origin. Because similar layers were found ～ 2000 km east of Dome Fuji, at EPICA (European Project for Ice Coring in Antarctica)-Dome C, particles must have rained down over a wide area 434 and 481 ka. The strewn fields occurred over an area of at least 3 × 10⁶ km². Chemical compositions of constituent phases and oxygen isotopic composition of olivines suggest that the upper dust layer was produced by a high-temperature interaction between silicate-rich melt and water vapor due to an impact explosion or an aerial burst of a chondritic meteoroid on the inland East Antarctic ice sheet. An estimated total mass of the impactor, on the basis of particle flux and distribution area, is at least 3 × 10⁹ kg. A possible parent material of the lower dust layer is a fragment of friable primitive asteroid or comet. A hypervelocity impact of asteroidal/cometary material on the upper atmosphere and an explosion might have produced aggregates of sub-μm to μm-sized spherules. Total mass of the parent material of the lower layer must exceed 1 × 10⁹ kg. The two extraterrestrial horizons, each a few millimeters in thickness, represent regional or global meteoritic events not identified previously in the Southern Hemisphere.     

3-D internal architecture of methane hydrate-bearing turbidite channels in the eastern Nankai Trough, Japan

The reservoir architecture of methane hydrate (MH) bearing turbidite channels in the eastern Nankai Trough, offshore Japan is evaluated using a combination of 3-D seismic and well data. On the 3-D seismic section, the MH-bearing turbidite channels correspond to complex patterns of strong seismic reflectors, which show the 3-D internal architecture of the channel complex. A seismic-sequence stratigraphic analysis reveals that the channel complex can be roughly classified into three different stages of depositional sequence (upper, middle, and lower). Each depositional sequence results in a different depositional system that primarily controls the reservoir architecture of the turbidite channels. To construct a 3-D facies model, the stacking patterns of the turbidite channels are interpreted, and the reservoir heterogeneities of MH-bearing sediments are discussed. The identified channels at the upper sequence around the β1 well exhibit low-sinuosity channels consisting of various channel widths that range from tens to several hundreds of meters. Paleo-current flow directions of the turbidite channels are typically oriented along the north-northeast-to-south-southwest direction. High-amplitude patterns were identified above the channels along the north-to-south and north-northeast-to-south-southeast directions. These roughly coincide with the paleo-current flow of the turbidite channels. An interval velocity using high-density velocity analysis shows that velocity anomalies (>2000 m/s) are found on the northeastern side of the turbidite channels. The depositional stage of the northeastern side of the turbidite channels exhibits slightly older sediment stages than the depositional stages of the remaining channels. Hence, the velocity anomalies of the northeastern side of the channels are related to the different stages of sediment supply, and this may lead to the different reservoir architectures of the turbidite channels.     

High belowground biomass allocation in an upland black spruce (Picea mariana) stand in interior Alaska

The root system of forest trees account for a significant proportion of the total forest biomass. However, data is particularly limited for forests in permafrost regions. In this study, therefore, we estimated the above- and belowground biomass of a black spruce (Picea mariana) stand underlain with permafrost in interior Alaska. Allometric equations were established using 4–6 sample trees to estimate the biomass of the aboveground parts and the coarse roots (roots >5 mm in diameter) of P. mariana trees. The aboveground biomass of understory plants and the fine-root biomass were estimated by destructive sampling. The aboveground and coarse-root biomasses of the P. mariana trees were estimated to be 3.97 and 2.31 kg m^?2, respectively. The aboveground biomass of understory vascular plants such as Ledum groenlandicum and the biomass of forest floor mosses and lichens were 0.10 and 0.62 kg m^?2, respectively. The biomass of fine roots <5 mm in diameter was 1.27 kg m^?2. Thus, the above- and belowground biomasses of vascular plants in the P. mariana stand were estimated to be 4.07 and 3.58 kg m^?2, respectively, indicating that belowground biomass accounted for 47% of the total biomass of vascular plants. Fine-root biomass was 36% of the total root biomass, of which 90% was accumulated in the surface organic layer. Thus, this P. mariana stand can be characterized as having extremely high belowground biomass allocation, which would make it possible to grow on permafrost with limited soil resource availability.     

Stormflow generation involving pipe flow in a zero‐order basin of Peninsular Malaysia

Hydrological responses in a zero‐order basin (ZOB), a portion of whose discharge emerged via preferential flow through soil pipes, were examined over a 2‐year period in Peninsular Malaysia to elucidate primary stormflow generation processes. Silicon (Si) and specific conductance (EC) in various runoff components were also measured to identify their sources. ZOB flow response was dependent on antecedent precipitation amount; runoff increased linearly with precipitation during events >20 mm in relatively wet antecedent moisture conditions. Runoff derived from direct precipitation falling onto saturated areas accounted for <0·2% of total ZOB flow volume during the study period, indicating the predominance of subsurface pathways in ZOB flow. ZOB flow (high EC and low Si) was distinct from perennial baseflow via bedrock seepage (low EC and high Si) 5 m downstream of the ZOB outlet. Pipe flow responded quickly to ZOB flow rate and was characterized by a threshold flow capacity unique to each pipe. Piezometric data and pipe flow records demonstrated that pipes located deeper in the soil initiated first, followed by those at shallower depths; initiation of pipe flow corresponded to shallow groundwater rise above the saprolite‐soil interface. Chemical signatures of pipe flow were similar to each other and to the ZOB flow, suggesting that the sources were well‐mixed soil‐derived shallow groundwater. Based upon the volume of pipe flow during storms, the combined contribution of the pipes monitored accounted for 48% of total ZOB flow during the study period. Our results suggest that shallow groundwater, possibly facilitated by preferential flow accreted above the saprolite–soil interface, provides dominant stormflow, and that soil pipes play an important role in the rapid delivery of solute‐rich water to the stream system. Copyright © 2006 John Wiley & Sons, Ltd.     

Large-Scale Mapping Observations of the C i (3P1-3P0) and CO (J = 3-2) Lines toward the Orion A Molecular Cloud

Large-scale mapping observations of the 3P1-3P0 fine-structure transition of atomic carbon (C i, 492 GHz) and the J=3-2 transition of CO (346 GHz) toward the Orion A molecular cloud have been carried out with the Mount Fuji submillimeter-wave telescope. The observations cover 9 deg2 and include the Orion Nebula M42 and the L1641 dark cloud complex. The C i emission extends over almost the entire region of the Orion A cloud and is surprisingly similar to that of 13CO (J=1-0). The CO (J=3-2) emission shows a more featureless and extended distribution than C i. The C i/CO (J=3-2) integrated intensity ratio shows a spatial gradient running from the north (0.10) to the south (1.2) of the Orion A cloud, which we interpret as a consequence of the temperature gradient. On the other hand, the C i/13CO (J=1-0) intensity ratio shows no systematic gradient. We have found a good correlation between the C i and 13CO (J=1-0) intensities over the Orion A cloud. This result is discussed on the basis of photodissociation region models.     

Resistivity exploration for altered zone at otake geothermal area — Japan

Geothermal electric power plant with a capacity of 10 mw has been now constructed by the Kyushu Electric Power Co. Ltd. at Otake, northern part of the Kyushu Island. Resistivity exploration, one of geophysical prospecting applied to this field in order to investigate the subsurface structure accompanied with natural steams, indicated low resistivity layer corresponding to altered zone of andesite due to hydrothermal agents. For the rapid interpretation of resistivity sounding curves, a method of calculating the standard curve for the multiple layered earth is developed in the utilization of an electronic digital computer. Some examples to show the application of this method are given, and tinally the result is described of resistivity measurement at Otake geothermal area.     

Partial mass isolation in tall buildings

To find an economical approach in the seismic design of tall buildings, it is proposed to isolate a part of the structure by an isolator layer located in the height of building. Application of this technique causes a fundamental change in basic dynamic characteristics of the system. As a result, all major modal shapes of structure exhibit large displacement at the level of the isolator. A viscous damping device integrated into the isolation layer utilizes this relative movement to effectively reduce the earthquake input energy transmitted to the system. This technique is quite versatile and easily adjustable to different applications including seismic retrofit of buildings. Numerical analysis of some basic examples in this study shows desirable performances for a variety of applications. © 1998 John Wiley & Sons, Ltd.