Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.     

http://dx.doi.org/10.1016/j.gsf.2016.04.002

Population synthesis studies into planet formation have suggested that distributions consistent with observations can only be reproduced if the actual Type Ⅰ migration timescale is at least an order of magnitude longer than that deduced from linear theories.Although past studies considered the effect of the Type I migration of protoplanetary embryos,in most cases they used a conventional formula based on static torques in isothermal disks,and employed a reduction factor to account for uncertainty in the mechanism details.However,in addition to static torques,a migrating planet experiences dynamic torques that are proportional to the migration rate.These dynamic torques can impact on planet migration and predicted planetary populations.In this study,we derived a new torque formula for Type Ⅰ migration by taking into account dynamic corrections.This formula was used to perform population synthesis simulations with and without the effect of dynamic torques.In many cases,inward migration was slowed significantly by the dynamic effects.For the static torque case,gas giant formation was effectively suppressed by Type I migration;however,when dynamic effects were considered,a substantial fraction of cores survived and grew into gas giants.     

Subsidence of the Miyako‐Sone submarine carbonate platform,east of Miyako‐jima Island,northwestern Pacific Ocean

Bathymetric mapping and observations of the seafloor using a remotely operated vehicle (ROV, Hyper‐Dolphin 3K) were carried out on the slopes of the Miyako‐Sone submarine platform, east of Miyako‐jima in the Ryukyu Islands, northwestern Pacific Ocean. The bathymetric map indicates that terraces are present at water depths of approximately 140 m, 330 m, 400 m, and 680 m on the northwestern slope of the platform. A number of NW–SE trending lineaments, probably faults, extend perpendicular to the axis of the Ryukyu Island Arc. Two ROV surveys were conducted at water depths ranging from 519 m (on the slope) to 121 m (shallowest part of the platform). The surveys revealed that well‐indurated carbonate rocks are exposed at terrace margins and on upper slopes, and that the lower slopes are covered with modern sediments consisting of unconsolidated, coarse‐sand‐sized bioclastic carbonates. Calcareous nannofossils from the well‐indurated carbonate rocks indicate a Middle–Late Pleistocene age, which suggests that the rocks correlate with the Quaternary reef and fore‐reef deposits of the Ryukyu Group (Ryukyu Limestone) on the Ryukyu Islands. No siliciclastic deposits corresponding to the upper Miocene–lower Pleistocene Shimajiri Group (as exposed on Okinawa‐jima and Miyako‐jima islands) were recovered during the surveys. Coeval well‐indurated carbonate rocks, all of which formed in a similar sedimentary environment, have been downthrown towards the west due to displacements on the western sides of normal faults. Subsidence of the Miyako‐Sone submarine platform was the result of large vertical displacements on such normal faults. The timing of initial subsidence cannot be tightly constrained, but the presence of the youngest limestone at progressively lower levels towards the west suggests the subsidence continued until after 0.265 Ma.     

Applicability of Individual Transferable Quotas (ITQs) in Japanese fisheries: A comparison of rights-based fisheries management in Iceland, Japan, and United States

ITQs have not yet been introduced by the Government of Japan. In coastal areas, fishery cooperative associations have traditionally played an important role in managing fisheries through self-imposed rules and peer-monitoring systems. Recently, however, the economic competitiveness of Japanese fisheries in the international market is being questioned. In this paper, a detailed examination of the pros and cons of the current system in Japan is compared to the current fishery management measures of Iceland and the United States, where attaining economically or biologically efficient outcomes may be prioritized in making fisheries management decisions. For many coastal fisheries in Japan, maintaining a management scheme in which stakeholders play an active role in determining fisheries measures seems more relevant if their priority is to maintain the stability of coastal communities and equity of stakeholders. Intensive dialog among stakeholders would be necessary to identify shared objectives of their fishery operations and to make decisions to establish specific steps toward the goal of increasing economic efficiency, environmental sustainability, or stability of communities and equity of stakeholders.     

Quasi-stationary striations in basin-scale oceanic circulation: vorticity balance from observations and eddy-resolving model

Recently, prominent jet-like features of the ocean circulation, called striations, with a meridional scale of O(300–500 ;km) and extending for thousands of kilometers in length, have been detected in satellite and in situ observations and in high-resolution numerical models. In this paper, we study quasi-stationary striations, which are best seen in the multi-year time-averaged velocity fields. Using 1993–2002 mean dynamic ocean topography, satellite altimeter observations, and output of the Ocean General Circulation Model for the Earth Simulator, the dynamics of the quasi-stationary striations in the eastern parts of the subtropical North and South Pacific are examined by assessing individual terms in the time-averaged equations of relative and potential vorticity. While non-linear effects are found to be essential in the dynamics of the striations, rejecting some linear hypotheses forwarded in the earlier studies, the relevance of the Rhines mechanism is not confirmed. Eddy flux does not act as a relative vorticity source for the striations. Using the potential vorticity (PV) diagnostics, we show that the time-mean PV is not conserved along the time-mean streamlines, and on the scale of the striations these changes in PV are largely induced by the eddy flux of layer thickness. The fact that eddy fluxes contribute to the striations’ time-mean PV budget suggests that the striations are not a kinematical artifact of time-averaging of westward-propagating eddies.     

Predicting the displacement of triple pendulum™ bearings in a full‐scale shaking experiment using a three‐dimensional element

The accuracy of a series spring model to predict the peak displacement and displacement history of Triple Pendulum? (TP) bearings in a strongly shaken, full‐scale building is evaluated in this paper. The series spring model was implemented as a self‐contained three‐dimensional TP bearing element in OpenSees and is now available for general use. The TP bearing element contains the option for constant friction or a generalized friction model that accounts for the effect of instantaneous velocity and compression load on the friction coefficient. Comparison between numerical simulation and experimental data of a five‐story steel moment frame building shows that the peak displacement of isolation system can generally be predicted with confidence using a constant friction coefficient model. The friction coefficient model accounting for the effect of axial load and velocity leads to minor improvement over the constant friction coefficient models in some cases. Copyright © 2013 John Wiley & Sons, Ltd.     

Distribution of local Cs anomalies on the seafloor near the Fukushima Dai-ichi Nuclear Power Plant

An estimated 3.5 ± 0.7 × 10¹⁵ Bq of ¹³⁷Cs is thought to have been discharged into the ocean following the melt down at Fukushima Dai-ichi Nuclear Power Plant (F1NPP). While efforts have been made to monitor seafloor radiation levels, the sampling techniques used cannot capture the continuous distribution of radionuclides. In this work, we apply in situ measurement techniques using a towed gamma ray spectrometer to map the continuous distribution of ¹³⁷Cs on the seafloor within 20 km of the F1NPP. The results reveal the existence of local ¹³⁷Cs anomalies, with levels of ¹³⁷Cs an order of magnitude higher than the surrounding seafloors. The sizes of the anomalies mapped in this work range from a few meters to a few hundreds of meters in length, and it is demonstrated that the distribution of these anomalies is strongly influenced by meter scale features of the terrain.     

Projection of future world water resources under SRES scenarios: an integrated assessment

Abstract

Changes in water resources availability, as affected by global climate warming, together with changes in water withdrawal, could influence the world water resources stress situation. In this study, we investigate how the world water resources situation will likely change under the Special Report on Emissions Scenarios (SRES) by integrating water withdrawal projections. First, the potential changes in water resources availability are investigated by a multi-model analysis of the ensemble outputs of six general circulation models (GCMs) from organizations worldwide. The analysis suggests that, while climate warming might increase water resources availability to human society, there is a large discrepancy in the size of the water resource depending on the GCM used. Secondly, the changes in water-stressed basins and the number of people living in them are evaluated by two indices at the basin scale. The numbers were projected to increase in the future and possibly to be doubled in the 2050s for the three SRES scenarios A1b, A2 and B1. Finally, the relative impacts of population growth, water use change and climate warming on world water resources are investigated using the global highly water-stressed population as an overall indicator. The results suggest that population and socio-economic development are the major drivers of growing world water resources stress. Even though water availability was projected to increase under different warming scenarios, the reduction of world water stress is very limited. The principal alternative to sustainable governance of world water resources is to improve water-use efficiency globally by effectively reducing net water withdrawal.

Editor Z.W. Kundzewicz; Associate editor D. Gerten     

Shaking Maps for Scenario Earthquakes by Applying the Upgraded Version of the Strong Ground Motion Prediction Method ��Recipe��

The strong ground motion prediction method ??Recipe?? was published by the Headquarters for Earthquake Research Promotion (HERP) of Japan. HERP has applied this method to prepare shaking maps for scenario earthquakes in specific active faults. Recently, Recipe was updated following its verification by simulations of strong ground motions associated with the Mw?=?6.6 off-shore earthquake west of Fukuoka prefecture in 2005, which occurred in the northwest part of the Kego fault zone located in northern Kyushu, Japan. One of the prominent changes in the upgraded version of Recipe is the inclusion of a procedure to evaluate seismic intensities on the ground surface from waveforms of S-wave velocity of 400?m/s on the engineering bedrock. By applying the upgraded version of Recipe, we have made shaking-maps for earthquakes in the southeast part of the Kego fault zone, which is located directly below the mega-city of Fukuoka. We assume four source models for scenario earthquakes; the locations of the asperities and the hypocenters vary between the models. The results show that in all cases, disastrous seismic intensities can strike a wide area of Fukuoka city. Differences in the distributions of seismic intensities among the four cases can be clearly observed in the area located on the extension of the source fault. Furthermore, we construct a velocity-layer structure model on the engineering bedrock for the central area of Fukuoka city. We assess not only the distribution of seismic intensities but also waveforms on the ground by using an equivalent linear method for the central area of Fukuoka city.     

Performance of dry-separation processes in the recovery of cenospheres from fly ash and their implementation in a recovery unit

Cenospheres recovery is one of the coal fly ash beneficiations, providing economic as well as environmental benefits. Current techniques, such as lagoon or other wet-separation processes, consume large amounts of water and add to water pollution due to leaching of toxic materials from fly ash. The other possible disadvantage is the need for a wide operational area, which is unsuitable for densely populated countries. As wet-separation processes have some disadvantages, an improved and/or sustainable alternative recovery technique is required. An air classifier is one of the alternative techniques. In this study, two types of air classifiers, namely a closed-type pneumatic separator and a micron separator, have been investigated. In terms of separation efficiency, it was found that the micron separator has the potential to be applied in cenospheres recovery from coal fly ash, giving a Newton's efficiency of 0.44, as compared to a value of about 0.26 for the closed-type pneumatic separator. The cenospheres recoveries of both pieces of equipment at their optimum Newton's efficiencies were similar at over 60 wt.%. The separation performance was further assessed from the particle distributions of the overflow and underflow products obtained from both pieces of equipment, as well as from SEM images. It was found that the lower Newton's efficiency of the closed-type pneumatic separator was due to the re-concentration of fine particles in the underflow product at air-flow rates higher than 2.2 m/s (the underflow product yield was about 55 wt.%).In order to further confirm the applicability of this technique, the micron separator, which had provided higher separation efficiency and cenospheres recovery, was deployed in a cenospheres recovery unit prior to the use of a wet-separation process (float and sink tank). About 80% of the cenospheres was recovered, with an 87.8% reduction in the total mass of fly ash to be separated in the float and sink tank. Consequently, much less water was needed for the process of cenospheres recovery. Moreover, it was also confirmed that the micron separator could yield higher quality fly ashes, that is, fly ash types I and II, from lower feed quality of fly ash type IV, which is the lowest category in commercial classification of fly ash according to JIS A6201.