Determination of Selenium in Twenty-Eight Geological Reference Materials by Atomic Absorption Spectrometry

Twenty-eight geological reference samples have been analysed for selenium using atomic absorption spectrometry with hydride generation and quartz cell atomizer and/or with solvent extraction and carbon tube atomizer. Data are presented for 5 CCRMP, 6 USGS, 3 NBS, 6 NIM and 8 GSJ reference materials.     

Optimal placement of sensors on buildings subjected to intermediate‐storey excitation according to QN control method

An algorithm to calculate direct velocity feedback gain with limited number of sensors is developed in a simple way such that a certain performance index is minimized according to QN control method. If a limited number of velocity outputs can be measured, full velocity responses of the whole structure can be interpolated based on the mode shapes. By defining the performance index function as a combination of the structure's velocity responses and control forces only, feedback gain can be determined according to QN control method with the external excitation being taken into account throughout the entire algorithm. Control forces are then regulated by the time‐invariant feedback gain matrix. The effective location of the active control devices for a building structure subjected to intermediate‐storey excitation has been determined to be in the three floors adjacent to the vibration source. Hence for the purpose of this paper, only the optimal placement of sensors is verified. It is shown in this paper that if the dynamic behaviour of the structure is well described by a mathematical model, sufficient response reduction effect can be achieved according to the new DVFC algorithm, and the degradation of control performance due to time delay can also be verified. Copyright © 2001 John Wiley & Sons, Ltd.     

Linear waves in a radiating and scattering grey medium

The equation of radiative acoustics is derived by taking into account the effect of a non-transverse magnetic field, and the solutions are schematically represented. The main results shown in Paper I and Paper II are valid even in the presence of a non-transverse magnetic field, and the only difference is that theadiabatic, isothermal, andisentropic speeds of sound and theradiation-acoustic speed in Paper I which respectively correspond to theadiabatic, isothermal, andisentropic magnetoacoustic speeds and theradiation-magnetoacoustic speed in Paper II are replaced by the sets of speeds ofadiabatic, isothermal, isentropic, andradiation-acoustic fast andslow waves, respectively.     

Geological and Hydrodynamical Examination of the Bathyal Tsunamigenic Origin of Miocene Conglomerates in Chita Peninsula, Central Japan

A conglomerate appears on a rocky coast called ??Tsubutega-ura Coast??, located on the southwestern coast near the southern tip of the Chita Peninsula, Aichi Prefecture, central Japan. The conglomerate belongs to Miocene sedimentary rocks termed the Morozaki Group. The conglomerate includes meter-scale boulders, indicating that it was formed by an extraordinary event. In the geological investigation, we observed that the conglomerate shows alternate changes of paleocurrent directions between seaward and landward. This feature is supposed to be formed by tsunami currents. In the hydrodynamical investigation, we obtained following results: (1) the lowest limit of a current velocity to move a boulder of about 3?m in diameter would be about 2?C3?m/s, (2) the speed of tsunami currents reproduced by tsunami simulation exceeds 3?m/s at 300?m in depth when the tsunami is generated by a gigantic earthquake with magnitude 9.0 or more, (3) the transport distance of the boulder would be several hundred?meters to several kilometers by one tsunami event caused by a gigantic earthquake. We conclude that tsunamis best explain the formation of the conglomerate deposited in upper bathyal environments about 200?C400?m depth, both from geological and hydrodynamical viewpoints.     

Investigation of cutting methods for small samples of Hayabusa and future sample return missions

We report the investigation of cutting methods for Hayabusa samples. The purpose of our study is to explore the possibility of applying multiple analyses to a single particle effectively. We investigated the cutting performance of a blade dicing saw, laser, focused ion beam (FIB), and physical breaking by microindenter. Cutting performance was examined by estimating the aspect ratio of the cut slit, i.e., depth over width of the slit. We also investigated the possible contamination and sample damage by cutting. The result of the investigation shows that we can cut the samples from <50 μm to 500 μm using those methods with aspect ratios from 10 to 20, although they would introduce some contamination or damage to the samples. Our investigations also provide an important basis for the analysis of samples obtained by future sample return missions.     

Adaptive methods to solve free boundary problems of flow through porous media

Grid adaptive methods combined with domain adaptation are discussed for two-dimensional seepage flow problems with free boundaries through porous media. Examples of grid and domain adaptive methods are presented to demonstrate several ways to predict grids and shapes of free boundaries using an iterative scheme. Finally, the combined adaptive methods are applied to obtain smooth non-oscillatory shape of a free boundary of seepage flow through non-homogeneous porous media.     

Alkali (Rb/K) abundances in Allende barred-olivine chondrules: Implications for the melting conditions of chondrules

Abstract— In order to study abundances of alkali metals in chondrules, 25 petrographically characterized chondrules, including 18 barred olivine (BO) chondrules from the Allende (CV3) meteorite, were analyzed for alkalis (K and Rb) and alkaline earths (Sr, Ba, Ca and Mg) by mass spectrometric isotope dilution. Most BO chondrules with higher alkalis (>CI level) have nearly CI-chondritic Rb/K ratios, while those with lower alkalis clearly show higher Rb/K ratios than the CI-chondritic. In general, BO chondrules with higher Rb/K exhibit more depletion of alkalis relative to Ca. The mean olivine Fa for individual chondrules positively correlates with bulk alkali concentrations in BO type but not in porphyritic type chondrules. These observations suggest that some BO chondrules formed from more reducing assemblages of precursor minerals, which experienced more intensive vaporization losses of alkalis, accompanied by Rb/K fractionation, during the chondrule-formation melting.     

Anisotropy of Mg isotopic fractionation during evaporation and Mg self-diffusion of forsterite in vacuum

Evaporation of solid materials under low-pressure conditions could play important roles in chemical and isotopic fractionations in the early solar system. We have studied anisotropy of isotopic fractionation of ²⁶Mg and ²⁵Mg during kinetic evaporation of forsterite (Mg₂SiO₄), which is potentially a powerful tool to understand thermal histories of crystals in the early solar system. Ion-microprobe depth profiling revealed that the Mg isotopic zoning profiles of forsterite evaporated at 1500-1700 °C are notably differing along the a-, b-, and c-axes, which can be attributed to anisotropy in self-diffusion coefficient of Mg (D) and an isotopic fractionation factor for evaporation of Mg (α). The D and α were obtained from zoning profiles by applying the diffusion-controlled isotopic fractionation model of Wang et al. [1999. Evaporation of single crystal forsterite: Evaporation kinetics, magnesium isotope fractionation, and implications of mass-dependent isotopic fractionation of a diffusion-controlled reservoir. Geochim. Cosmochim. Acta 63(6), 953-966.].The D is largest and smallest along the a- and c-axes, respectively. The activation energy of 560-670 kJ/mol indicates that Mg diffusion at 1500-1700 °C occurred in the intrinsic diffusion regime.The α seems to be larger along the a- or c-axes than along the b-axis. The α along the a- or c-axes show weak temperature dependence. The α along all the crystallographic orientations is closer to unity than that expected from the kinetic theory of gases. These lines of evidence suggest that surface processes such as breaking of bonds and surface diffusion are responsible for the isotopic fractionation.     

Low-temperature single crystal reflection spectra of forsterite

The infrared reflectivities of crystalline forsterite (Mg₂SiO₄) were measured for the temperature range 295–50 K for each crystal axis, between wavenumber 5000 and 100 cm⁻¹. The reflection spectra show clear dependence of temperature; most of the bands become more intense, sharper and their peak positions shift to higher wavenumber with decreasing temperature. Reflection spectra were fitted with dispersion formula of damped oscillator model of the dielectric constants and the oscillator parameters in the model were derived. The absorption spectra of forsterite particle are calculated with the derived dielectric constants to show that the forsterite features are good thermal indicator for cold temperature range below 295 K.