Factors controlling regional spatial distribution of 53 elements in coastal sea sediments in northern Japan: Comparison of geochemical data derived from stream and marine sediments

In all, 53 elements were analyzed in 1406 coastal sea sediment samples collected from an area off Hokkaido and the Tohoku region of Japan during a nationwide marine geochemical mapping project. The spatial distribution patterns of the elemental concentrations in coastal seas along with the existing geochemical maps in terrestrial areas were used to define natural geochemical background variation and mass transport processes. The terrestrial area is covered by mafic volcanic rocks and accretionary complexes associated with ophiolite, which has small amounts of felsic volcanic rocks and granite. The spatial distribution patterns of elements enriched in mafic lithologies such as Fe (Total Fe₂O₃) and Sc in marine environments are influenced by adjoining terrestrial materials. The spatial distribution patterns of Cr and Ni concentrations, which are highly abundant in ultramafic rocks on land, are used to evaluate the mass transport from land to the sea and the dispersive processes caused by oceanic currents. The scale of mass transport by oceanic currents occurs up to a distance of 100–200 km from the coast along the coastal areas. The regional differences of elements rich in felsic lithologies such as K (K₂O), Nb and La in marine sediments are determined mainly by the relative proportion of minerals and lithic fragments enriching felsic materials to those associated with mafic materials. The spatial distribution of elemental concentration is not always continuous between the land areas and coastal sea areas. That difference is interpreted as resulting from (1) transportation of marine sediments by oceanic currents and storm waves, (2) contribution of volcanic materials such as tephra, (3) occurrence of shell fragments and foraminifera tests and (4) distribution of relict sediments of the last glacial age and early transgression age. Contamination with Cu, Zn, Cd, As, Mo, Sn, Sb, Hg, Pb and Bi was not observed in marine environments because the study area has little anthropogenic activity. Terrestrial materials are the dominant source for these metals. The Mo, Cd, Sn, Sb, Hg, Pb and Bi are abundant in silty and clayey sediments locally because of early diagenetic processes, authigenic precipitation and organic substances associated with these elements. The spatial distribution of As concentration shows exceptions: it is concentrated in some coarse and fine sands on the shelf. The enrichment is explained by adsorption of As, sourced from a coal field, to Fe hydroxide.     

VIDEO AND PHOTOGRAPHIC SPECTROSCOPY OF 1998 AND 2001 LEONID PERSISTENT TRAINS FROM 300 TO 930 nm

Spectra of persistent meteor trains were observed at wavelength between 300 and 930 nm. Two obtained train spectra during the 1998 and 2001 Leonid meteor showers are reported here. During the 1998 Leonids, one train was detected by a photographic camera with a spectrograph covering 370–640 nm region. On the other hand, during the 2001 Leonids, video observations were carried out using image intensified cameras in ultraviolet (UV), visible and near infrared (near-IR) wavelengths. Temperatures in persistent trains have been measured by atmospheric O₂ A(0,1) band at the wavelength near 864.5 nm. From a video spectrum obtained just 7 s after parent fireball’s flare, a rotational temperature of 250 K at altitude of 88.0±0.5 km was estimated. We can say that the cooling time scale of train strongly depends on the initial mass of its fireball at least for Leonids. Based on cooling constant calculated from our results, we estimated a temperature of ∼ ∼130 K as a final exothermic temperature at early stage of persistent trains.     

Linear waves in a radiating and scattering grey medium

The equation of radiative acoustics is derived by taking into account the effect of a transverse magnetic field, which is quite similar to the acoustic equation derived in Paper I. The only difference is that theadiabatic, isothermal, andisentropic speeds of sound and theradiation-acoustic speed are replaced by theadiabatic, isothermal, andisentropic magnetoacoustic speeds and theradiation-magnetoacoustic speed, respectively. The main results shown in Paper I are valid even in the presence of a transverse magnetic field.     

Removal of water‐surface reflection effects with a temporal minimum filter for UAV‐based shallow‐water photogrammetry

The recent development of structure‐from‐motion (SfM) and multi‐view stereo (MVS) photogrammetry techniques has enabled semi‐automatic high‐resolution bathymetry using aerial images taken by consumer‐grade digital cameras mounted on unmanned aerial vehicles (UAVs). However, the applicability of these techniques is sometimes limited by sun and sky reflections at the water surface, which render the point‐cloud density and accuracy insufficient. In this research, we present a new imaging technique to suppress the effect of these water‐surface reflections. In this technique, we order a drone to take a short video instead of a still picture at each waypoint. We then apply a temporal minimum filter to the video. This filter extracts the smallest RGB values in all the video frames for each pixel, and composes an image with greatly reduced reflection effects. To assess the performance of this technique, we applied it at three small shallow‐water sites. Specifically, we evaluated the effect of the technique on the point cloud density and the accuracy and precision of the photogrammetry. The results showed that the proposed technique achieved a far denser point cloud than the case in which a randomly chosen frame was used for each waypoint, and also showed better overall accuracy and precision in estimating water‐bottom elevation. The effectiveness of this new technique should depend on the surface wave state and sky radiance distribution, and this dependence, as well as the applicability to large areas, should be investigated in future research. Copyright © 2018 John Wiley & Sons, Ltd.     

Diets of Steller sea lions off the coast of Hokkaido,Japan: An inter‐decadal and geographic comparison

Inter‐decadal and geographic variations in the diets of Steller sea lion, Eumetopias jubatus, were examined based on the contents of 408 stomachs collected from coastal areas around Hokkaido Island during the periods 1994–1998 and 2005–2012. The most important prey species in the 1990s were gadid fishes (walleye pollock [Gadus chalcogrammus], Pacific cod [Gadus microcephalus] and saffron cod [Eleginus gracilis]). The frequency of occurrence and gravimetric contribution of gadids decreased in the 2000s latter period at three study sites (Rausu, Shakotan and Rebun) and were replaced by Okhotsk Atka mackerel (Pleurogrammus azonus) and smooth lumpsucker (Aptocyclus ventricosus). However, analysis based on gravimetric composition indicated that the dietary diversity of prey showed only a slight inter‐decadal difference, reflecting the wide diversity of prey ingested during both study periods. These results indicate that Steller sea lions along the Hokkaido coast are opportunistic feeders that utilize a wide variety of prey, and appear to feed mainly upon prey that is easily obtained.     

Collapse behavior of a brick masonry house using a shaking table and numerical simulation based on the extended distinct element method

Damage caused by devastating earthquakes has occurred in many developing countries. In order to mitigate such damage by promoting the study of adequate seismic design strategies, the authors conducted a dynamic collapse test on 3 m × 3 m × 3 m brick masonry house constructed with Pakistani bricks, using a one-direction horizontal large-scale shaking table. In order to analyze and simulate seismic performance of the masonry structures, the authors applied a new numerical simulating method based on the Extended Distinct Element Method (EDEM) and conducted collapse simulations of the brick masonry house behavior during the shaking table tests. In the numerical simulation model, bricks were assumed to be rigid bodies, and mortar was modeled using a mortar spring that consists of a normal spring and a shear spring. The parameters of each mortar spring were defined based on the results of material tests. Simulated results showed various collapsing processes, and the simulated aspects were found to be similar to the results of the shaking table tests.     

Fluid Inclusion Study and Opaque Mineral Assemblage at the Deep and Shallow Part of the Batu Hijau Porphyry Copper-gold Deposit, Sumbawa, Indonesia

The Batu Hijau deposit is the only porphyry type deposit in production in the Sunda‐Banda arc, Indonesia. This study discusses the reason for the localization of copper grade at the deep part of the deposit based on the observation of opaque mineral assemblage. In addition, the formation condition of quartz veins and opaque minerals is discussed on the basis of the fluid inclusion microthermometry. Samples were selected from drill holes SBD100, SBD168, SBD194, SBD254, and SBD257 to cover the wide vertical range. At the Batu Hijau deposit, quartz veins have been classified mainly into four types called A, B, C and D veins, and the A veins contain mainly bornite, often associated with digenite and chalcocite. In addition, magnetite occurs in A veins. However, at the deep part of the deposit, there are quartz veins associated with magnetite, but few copper sulfides such as bornite and chalcopyrite in quartz veins, as observed in SBD257. Quartz veins at depth in SBD257 have abundant magnetite and pyrite. Pyrite in quartz veins at depth in SBD257 mainly occur at the rim of magnetite grains or interstices between them. In quartz veins in SBD254, there are abundant copper sulfides such as bornite and chalcopyrite in spite of the depth. Bornite and chalcopyrite occur as inclusions in magnetite grains in quartz veins in SBD254. Pyrite which often occurs in low grade zone in quartz veins in SBD254 is also recognized at the rims of copper sulfides. This indicates that pyrite in SBD257 and SBD254 formed later than magnetite. On the other hand, blebs of bornite and chalcopyrite inclusions in magnetite grains, which are recognized in quartz veins in SBD168 at shallow high grade part, suggest that the hydrothermal fluid, from which magnetite was deposited also brought the copper sulfides such as bornite and chalcopyrite to the deep part of the Batu Hijau deposit. Therefore, it is concluded that initially the high grade ore zone extended to depth without localization. However due to the later overprinting hydrothermal activity, copper sulfides and magnetite were replaced or dissolved and pyrite was formed, resulting the low grade zone at the deep part of the deposit. Dissolution temperatures (Td) of halite obtained by from fluid inclusion microthermometry show significant differences between SBD168 and other drill holes. The high Td obtained in SBD168 may indicate larger volume of NaCl crystals in hydrothermal fluid at the time of entrapment of the fluid inclusions and formation of other opaque minerals such as magnetite and copper‐iron sulfides. It suggests that the ratio of vapor to brine is also higher at the shallow part of the deposit. The higher vapor to brine ratio may suggest a higher degree of boiling. Removal of vapor phase separated from brine during boiling increases the concentration of substances dissolved in the brine, and this will result in saturation, as evidenced by the salinity and NaCl saturation. The higher degree of boiling suggested by the higher vapor to brine ratio at shallow part may have increased the copper concentration in the brine that may have lead the saturation, resulted in the deposition of copper‐bearing minerals.