Ozone measurements from the Balloon Intercomparison Campaign

Measurements of the Balloon Intercomparison Campaign (BIC), conducted during fall, 1982 (BIC-1) and summer, 1983 (BIC-2), are reported. Results of five remote and two in situ techniques agree (with a few exceptions) within 95% confidence level uncertainties and generally within 15% above 20 km. Weighted mean profiles, which best represent conditions during the capaign, are used as a comparison standard. Accuracies of experiments indicated by BIC generally confirm estimated uncertainites for ECC sondes, UV photometry, and microwave emission experiments, are somewhat better for far IR emission and IR absorption experiments, and are somewhat worse for IR emission and solar UV absorption experiments. The large collection of BIC measurements confirms a problem reported earlier with current theoretical modeling of ozone near 40 km where transport is negligible and the chemistry is believed to be simpler.     

Die Petrographie des Knollenmergel,Mittlerer Keuper,Trias

In Württemberg, the upper part of the Middle Keuper is referred to as “Knollenmergel” (= “nodular marl”, a marly claystone containing carbonate nodules), 24 samples were studied from a test well located near Hechingen. X-ray diffraction was used for the determination of the mineral composition of whole rocks and of the clay fractions. The coarser fractions were studied under the petrographic microscope. The fractions < 2π Ø consist chiefly of an mixed-layer mineral with illite and expandable, montmorillonite-like layers as the components. There are about 30 % of expandable layers. A low-angle reflection near 31 Å is indicative of considerable order among component-layer species approaching that of rectorite. In the lower part of the section, moderate amounts of sudoite are present in addition. Illite as a discrete phase could not be determined with certainty. The microscopic fractions consist partly of monomineralic grains of quarz, dolomite, and calcite. In addition, they contain considerable amounts of polymineralic aggregates, which were not dispersed by the rather mild disintegration method used in the present study. Accordingly, the rocks are claystones characterized by the same degree of lithification as those occurring in other parts of the Keuper in Württemberg. The interstratified mineral is tentatively derived from the erosion of a uniform body of volcanogenic material of Paleozoic age. On the basis of grain-size distribution, the Knollenmergel is a water-laid sediment. Eolian transport as advocated by some geologists can be excluded. The difficulties experienced with the Knollenmergel as a building ground are explained by the high percentage of the expandable interstratified mineral and the dearth of a genuine sand fraction.     

A bottom-up methodology for integrating underwater video and acoustic mapping for seafloor substrate classification

A method that links acoustic mapping data to underwater video observations of seafloor substrate is described for use in defining fish habitat. Three study areas in the Aleutian Islands were acoustically mapped using sidescan and multibeam sonar. The sidescan sonar data were used to compute average reflectivity (hardness) and seafloor complexity. The multibeam depth data were used to determine local slope, rugosity (seafloor roughness) and relative height. Underwater video was collected from three to four transects in each of the three study areas. The underwater video was used to classify the seafloor into nine observed primary and secondary substrate classes. A statistical relationship between the observed (video) and the remotely sensed (acoustic) seafloor characteristics was estimated using a classification tree. The best classification tree utilized rugosity, reflectivity and complexity data and produced misclassification rates of less than 25% overall. Mean grain size of sediment samples was not strongly related to the acoustic data. Error rates were highest for those substrate classes with the smallest number of data points. The results highlight the need for adequate sample sizes and coverage of all potential substrate types when groundtruthing acoustic maps.     

Sound in media: audio drama and audio-guided tours as stimuli for the creation of place

Mass media frequently makes use of more than the visual image. With the exception of music, movie scores, and radio news however, media geographers have largely ignored the impact sound in media has on shaping and characterizing our experience of the world. We address this lack by showcasing two types of audio media: audio drama and audio-guided tours. The former will be explored with the help of the world’s most successful audio drama series The Three Investigators to give a historical and theoretical introduction to the realm of sound within mass media. The latter will be illustrated using the example of the Austin Walking Tour as a representative production for city tourism.     

The X-ray spectrum and light curve of Supernova 1995N

We report on multi-epoch X-ray observations of the Type IIn (narrow emission line) Supernova (SN) 1995N with the ROSAT and ASCA satellites. The 1998 January ASCA X-ray spectrum is well fitted by a thermal bremsstrahlung         or power-law         model. The X-ray light curve shows evidence for significant flux evolution between 1996 August and 1998 January: the count rate from the source decreased by 30 per cent between our 1996 August and 1997 August ROSAT observations, and the X-ray luminosity most likely increased by a factor of ∼2 between our 1997 August ROSAT and 1998 January ASCA observations, although evolution of the spectral shape over this interval is not ruled out. The high X-ray luminosity,     places SN 1995N in a small group of Type IIn supernovae with strong circumstellar interaction, and the evolving X-ray luminosity suggests that the circumstellar medium is distributed inhomogeneously.     

Production of Drinking Water from Highly Contaminated Surface Waters: Removal of Organic,Inorganic, and Microbial Contaminants Applying Mobile Membrane Filtration Units

In military out of area missions of the Bundeswehr, it can be necessary to produce drinking water even from highly polluted surface waters containing a variety of organic, inorganic, and microbiological contaminants. Thus, mobile drinking water purification systems must be able to remove such contaminants as far as possible to meet the requirements of the German and European drinking water regulation/directive. Presently, two novel drinking water purification units applying membrane filtration undergo intensive long‐term trials carried out by the Bundeswehr. If these trials positively proof the functionality of these units and their ability to remove all possible contaminants they shall substitute so far available devices which use large amounts of chemicals and charcoal filtration for water purification.In the course of a research project, the functionality of the new devices and their efficacy to remove high amounts of algae, microbes, and organic and inorganic pollutants are additionally tested in “worst‐case” field studies. In September 2000, the first mobile drinking water purification unit was tested at the Teltowkanal in Berlin, Germany.This canal was chosen because it carries high burdens of municipal sewage effluents. The results from the fatigue test confirmed the ability of the water purification unit to reduce the concentrations of all contaminants meeting the maximum tolerance levels set by the German/European drinking water regulation.The pre‐filtration device was very effective in removing algae and solid particles to protect the membranes from clogging and to enable an almost maintenance‐free operation. Residues of pharmaceuticals and some other organic contaminants have almost totally been removed from the surface water where they were detected at individual concentrations up to the μg/L‐level.     

Hydrodynamic model of cells for designing systems of urban groundwater drainage

An improved mathematical hydrodynamic quasi-two-dimensional model of cells, CELSUB3, is presented for simulating drainage systems that consist of pumping well fields or subsurface drains. The CELSUB3 model is composed of an assemblage of algorithms that have been developed and tested previously and that simulate saturated flow in porous media, closed conduit flow, and flow through pumping stations. A new type of link between aquifer cells and drainage conduits is proposed. This link is verified in simple problems with well known analytical solutions. The correlation between results from analytical and mathematical solutions was considered satisfactory in all cases. To simulate more complex situations, the new proposed version, CELSUB3, was applied in a project designed to control the water-table level within a sewer system in Cha?ar Ladeado Town, Santa Fe Province, Argentina. Alternative drainage designs, which were evaluated under conditions of dynamic recharge caused by rainfall in a critical year (wettest year for the period of record) and a typical year, are briefly described. After analyzing ten alternative designs, the best technical–economic solution is a subsurface drainage system of closed conduits with pumping stations and evacuation channels. Electronic Publication     

A New Single Vacuum Furnace Design for Cosmogenic 3He Dating

Helium‐3 is a stable cosmogenic isotope that can be used to determine the time interval during which a rock sample has been at or close to the Earth’s surface. As a result of the high production rate of ‘cosmogenic’³He (≈ 130 at g^?1 year^?1) and the low detection limit of modern mass spectrometers, it is possible to date exceptionally young surfaces (≈ 1000 years). The precision and accuracy of cosmogenic ³He measurements depend critically on the passive helium blank (produced by the metalwork of the extraction furnace) which can be significant relative to the sample signals. We have developed and constructed, at the CRPG (Nancy, France), a new high temperature furnace (< 1500 °C) to extract helium in minerals such as apatite, pyroxene and olivine at 1050, 1350 and 1450 °C, respectively. The furnace demonstrated an excellent helium extraction yield (> 99% for olivine and pyroxene for heating times of 20–30 min and temperatures in the range 1050–1450 °C) and low residual helium contributions (the blank, obtained under the same analytical conditions as for sample extraction: 1 × 10^?15 mole ⁴He and < 4 × 10^?21 mole ³He). This is approximately an order of magnitude lower than those reported by other laboratories using conventional furnaces.