Sediment accumulation along a glacially impacted mountainous coastline: north-east Gulf of Alaska

Tectonically active coastal regions of the world recently have been suggested to supply the bulk of sediment from land to the oceans. Seabed sampling on the continental shelf and in coastal embayments of the north-east Gulf of Alaska (Alsek River to Prince William Sound) was performed to examine the temporal and spatial variability of sediment accumulation in a mountainous coastal setting. Cores of varying lengths (30–300 cm) were collected at 84 stations to provide information on sedimentary processes using radiochemical (²¹⁰Pb and ¹³⁷Cs) techniques. Four types of ²¹⁰Pb activity profiles were observed, dominantly reflecting steady-state sediment accumulation. However, nonsteady-state profiles also were measured, resulting in part from episodic deposition near glacier-fed rivers and on the Copper River Delta. Sediment accumulation rates in the eastern half of the study area are highest at midshelf depths (≈100 m) (≥10 mm yr^?1) and near rivers draining the Bering Glacier (≈20 mm yr^?1). On the Copper River Delta, sediment accumulation rates are highest for the delta front (> 20 mm yr^?1) and decrease westward along the sediment dispersal route. Total annual sediment accumulation is 90–140×10⁶ tons yr^?1 on the shelf in the study area. Annual sediment accumulation for the total marine environment in the study area (including Icy and Yakutat Bays) exceeds 250×10⁶ tons yr^?1, potentially making this region the largest sink for sediment in North America. Spatial patterns in sediment accumulation on the shelf are similar between centennial and Holocene time-scales, reflecting the dominance of the Copper River and Bering and Malaspina glaciers as sediment sources. Temporal variability in accumulation rates between centennial and Holocene time-scales exists for portions of the study area near fiords and demonstrates the considerable changes that occur in sediment supply during glacial advances and retreats.     

Archean adakites from the Ashuanipi complex,eastern Superior Province,Canada: geochemistry,geochronology and tectonic significance

Contributions to Mineralogy and Petrology - Adakitic geochemical features characterize the Desliens suite of pre-tectonic diorite to tonalite sills intruded into volcanogenic greywackes of the...     

Holocene paleoenvironmental change inferred from two sediment cores collected in the Tibetan lake Taro Co

Journal of Paleolimnology - The Tibetan Plateau, also known as the “Water Tower of Asia” because of its function as a water storage and supply region, responds dramatically to modern...     

Sequence stratigraphy of a Middle to Upper Ordovician foreland succession (Ottawa Embayment,central Canada): Evidence for tectonic control on sequence architecture along southern Laurentia

The Middle to Upper Ordovician foreland succession of the Ottawa Embayment in central Canada is divided into nine transgressive‐regressive sequences that defines net deepening of a platform succession over ~15 m.y. from peritidal to outer ramp settings, then a return to peritidal conditions over ~3 m.y. related to basin filling by orogen‐derived siliciclastics. With a backdrop of net eustatic rise through the Middle to Late Ordovician, there are several different expressions of structural influence on sequence development in the embayment. During the Middle Ordovician (Darriwilian), foreland‐basin initiation was marked by regional onlap with abundant synsedimentary deformation across a faulted trailing‐margin platform interior; subsequent craton‐interior uplift resulted in voluminous influx of siliciclastics contemporary with local structurally influenced local channelization; then, a formation of a platform‐interior shale basin defines continued intrabasin tectonism. During the Late Ordovician (Sandbian, early Katian), structural influence was superimposed on sea‐level rise as indicated by renewed local development of a platform‐interior shale basin; differential subsidence and thickness variation of platform carbonate successions; abrupt deepening across shallow‐water shoal facies; and, micrograben development coincident with foreland‐platform drowning. These stratigraphic patterns are far‐field expressions of distal orogen development amplified in the platform interior through basement reactivation along an inherited buried Precambrian fault system. Comparison of Upper Ordovician (Sandbian‐lower Katian) sequence stratigraphy in the Ottawa Embayment with eustatic frameworks defined for the Appalachian Basin reveals greater regional variation associated with Sandbian sequences compared to regional commonality in base level through the early Katian.     

The influence of sampling design on spatial data quality in a geographic citizen science project

Geographic citizen science has much potential to assist in wildlife research and conservation, but the quality of observation data is a key concern. We examined the effects of sampling design on the quality of spatial data collected for a koala citizen science project in Australia. Data were collected from three samples—volunteers (n = 454), an Internet panel (n = 103), and landowners (n = 35)—to assess spatial data quality, a dimension of citizen science projects rarely considered. The locational accuracy of koala observations among the samples was similar when benchmarked against authoritative data (i.e., an expert‐derived koala distribution model), but there were differences in the quantity of data generated. Fewer koala location data were generated per participant by the Internet panel sample than the volunteer or landowner samples. Spatial preferences for land uses affecting koala conservation were also mapped, with landowners more likely to map locations for residential and tourism development and volunteers less likely. These spatial preferences have the potential to influence the social acceptability of future koala conservation proposals. With careful sampling design, both citizen observations and land use preferences can be included within the same project to augment scientific assessments and identify conservation opportunities and constraints.     

Insights about the formation of a complex impact structure formed in basalt from numerical modeling: The Vista Alegre structure,southern Brazil

We present the outcomes of simulations of the formation of the Vista Alegre impact structure, Paraná Basin, Brazil. The target comprised a thick sequence of volcanic rocks of predominantly basaltic composition of the Serra Geral Formation that had been deposited on top of sedimentary rocks (sandstones) of the Pirambóia/Botucatu formations. The cratering process was modeled using the iSALE shock physics code. Our best‐fit model suggests that (1) the crater was originally ~10 km in size; (2) it was formed in ~115 s by a stony projectile of 1000 m in diameter, for an assumed impact velocity of 12 km s^?1; (3) target rocks underwent a peak pressure of ~20 GPa, in agreement with previous petrographic investigations of shock deformation. Furthermore, the model points out that the sedimentary strata below the layer of volcanic rocks were raised by ~650 meters at the central part of the crater, which resulted in the current partial exposure of the sandstones at the surface. The outcomes of our modeling suggest that parameters like cohesion and strength of the target rocks, after shock compression, determined the final morphology of the crater, especially the absence of a topographically prominent central peak. Finally, the results of the numerical modeling are roughly in agreement with gravity data over the structure, in particular with respect to the presence of the uplifted sedimentary strata, which are responsible for a low gravity signature at the center of the structure.     

A high‐resolution seismic stratigraphy from a Scottish sea loch and its implications for Loch Lomond Stadial deglaciation

A detailed high‐resolution seismic stratigraphy, calibrated by core data and terrestrial geomorphological mapping, has been constructed for Loch Ainort, Isle of Skye. This study has provided a palaeoenvironmental history of the area as well as important corroborative evidence for the stepped deglaciation of the Loch Lomond Stadial ice‐field on Skye. The Ainort Glacier reworked pre‐Loch Lomond glacial deposits terminating in a grounded tidewater ice‐front potentially 800 m beyond the previously extrapolated limit. The first stage of deglaciation was characterised by the formation of De Geer moraines indicative of a period of interrupted retreat. The second phase, by contrast, produced hummocky relief with sporadic linear moraines suggesting periods of uninterrupted retreat with occasional stillstands/readvances. Paraglacial reworking of terrestrial slopes resulted in the deposition of thick, subaqueous, debris flows which graded into fluvioglacial dominated sediments and ultimately modern fjordic deposits. The identification of an initial period of active retreat punctuated by numerous readvances correlates directly with the terrestrial record. However, the offshore stratigraphy suggests that although the second phase was dominated by uninterrupted retreat, occasional stillstands/ readvances did occur. Copyright © 2000 John Wiley & Sons, Ltd.     

Tectono-sedimentary evolution of transverse extensional faults in a foreland basin: Response to changes in tectonic plate processes

Late Paleocene to Middle Eocene strata in the easternmost part of the Southern Pyrenees, up to 4 km thick, provide information on tectono-sedimentary evolution of faults transversal to the Pyrenean chain. To know how changes in tectonic plate processes control the structural evolution of transverse faults and the synchronous thickness and lithological distribution of sedimentary strata in a foreland basin, field observations, interpretation of 2D seismic lines tied to lithostratigraphic data of exploration wells and gravity modelling constrains were carried out. This resulted in the following two tectono-sedimentary phases in a foreland basin: first phase, dominated by transverse extensional faulting, synchronous with deposition of marine carbonates (ca. 57 to 51 Ma); and second phase, characterized by transverse contractional faulting, coeval to accumulation of marine and transitional siliciclastics (51 to 44 Ma). During the first phase, Iberia and Adria were moving to the east and west respectively. Therefore, lithospheric flexure in the easternmost part of the Iberian plate was developed due to that Sardinia was over-thrusting Iberia. Consequently, activation of E-dipping normal faults was generated giving rise to thick-deep and thin-shallow carbonate platform deposits across the hanging walls and footwalls of the transverse structures. During the second phase, a shearing interaction between Iberia and Sardinia prevailed re-activating the transverse faults as contractional structures generating thin-shelf and thick-submarine fan deposits across the hanging walls and footwalls of the transverse structures. In the transition between the first and second phases, evaporitic conditions dominated in the basin suggesting a tectonic control on basin marine restriction. The results of our study demonstrate how thickness and lithology distribution, controlled by transverse faulting in a compressional regimen, are influenced by phases related to processes affecting motions and interactions between tectonic plates and continental blocks.     

Helminth parasites of brown trout (Salmo Trutta L.) in Canterbury,New Zealand

Neopeltopsis pectinipes gen. et sp. nov. is described and figured from sublittoral marine algae at Wellington, New Zealand; the genus is an addition to the Peltidiidae Sars. The genus is compared with the other genera of the family, and a revised key is given to the genera of the Peltidiidae.     

P–T paths reconstruction of a collisional event: The example of the Thiviers-Payzac Unit in the Variscan French Massif Central

Because of late metamorphic and tectonic overprints, the reconstruction of prograde parts of P–T paths is often difficult. In the SW Variscan French Massif Central, the Thiviers-Payzac Unit (TPU) is the uppermost allochthon emplaced above underlying units. The TPU experienced a Barrovian metamorphism coeval with a top-to-the-NW ductile shearing (D2 event) in Early Carboniferous times (ca. 360–350 Ma). The tectonic setting of the D2 event, compression or synconvergence extension, remains unclear. Using the THERMOCALC software and the model system MnNCKFMASH, the peak P–T conditions are estimated from garnet rims and matrix minerals and the prograde evolution is deduced from garnet core compositions. The combination of these two approaches demonstrates that the TPU experienced pressure and temperature increases before reaching peak conditions at 6.6–9.0 +/− 1.2 kbar and 615–655 +/− 35 °C. This kind of P–T path shows that the regional D2 event corresponds to crustal thickening.