Process length variation of the cyst of the dinoflagellate Protoceratium reticulatum in the North Pacific and Baltic‐Skagerrak region: calibration as an annual density proxy and first evidence of pseudo‐cryptic speciation

Process length variation of cysts of the dinoflagellate Protoceratium reticulatum (Claparède et Lachmann) Bütschli in surface sediments from the North Pacific was investigated. The average process length showed a significant inverse relation to annual seawater density: σ_{t annual} = ?0.8674 × average process length + 1029.3 (R² = 0.84), with a standard error of 0.78 kg m^?3. A sediment trap study from Effingham Inlet in British Columbia revealed the same relationship between average process length and local seawater density variations. In the Baltic–Skagerrak region, the average process length variation was related significantly to annual seawater density: σ_{t annual} = 3.5457 × average process length ? 993.28 (R² = 0.86), with a standard error of 3.09 kg m^?3. These calibrations cannot be reconciled, which accentuates the regional character of the calibrations. This can be related to variations in molecular data (small subunit, long subunit and internal transcribed spacer sequences), which show the presence of several genotypes and the occurrence of pseudo‐cryptic speciation within this species. Copyright © 2012 John Wiley & Sons, Ltd.     

Transport and deposition of suspended particles in saturated porous media: hydrodynamic effect

A laboratory study was undertaken to determine the transport and deposition rate of suspended particles in columns of saturated porous media (gravel and glass beads), where the porous media were subjected to steady-state flow. Silt particles with a mode of 14 μm diameter (used as the suspended particles) and fluorescein (as the conservative tracer) were injected into the columns in short pulses. The breakthrough curves were competently described with the analytical solution of a convection–dispersion equation with a first-order deposition rate. The experiments were performed using different flow rates. The suspended particle size distribution, the porous media, and the flow rates themselves were the main factors retained in this study to investigate the mechanisms governing the transport and deposition kinetics in detail. The results showed the existence of a flow rate, beyond which suspended particles travel faster than the conservative tracer. A decrease of the deposition rate of suspended particles beyond a critical flow velocity was also observed. Such behaviour led to consideration of the couple hydrodynamic-gravity forces at high flow rates. As the hydrodynamic force increases, particle deposition rates are reduced due to the effect of hydrodynamic forces inhibiting the deposition.     

Brest sea level record: a time series construction back to the early eighteenth century

The completeness and the accuracy of the Brest sea level time series dating from 1807 make it suitable for long-term sea level trend studies. New data sets were recently discovered in the form of handwritten tabulations, including several decades of the eighteenth century. Sea level observations have been made in Brest since 1679. This paper presents the historical data sets which have been assembled so far. These data sets span approximately 300 years and together constitute the longest, near-continuous set of sea level information in France. However, an important question arises: Can we relate the past and the present-day records? We partially provide an answer to this question by analysing the documents of several historical libraries with the tidal data using a ‘data archaeology’ approach advocated by Woodworth (Geophys Res Lett 26:1589–1592, 1999b). A second question arises concerning the accuracy of such records. Careful editing was undertaken by examining the residuals between tidal predictions and observations. It proved useful to remove the worst effects of timing errors, in particular the sundial correction to be applied prior to August 1, 1714. A refined correction based on sundial literature [Savoie, La gnomique, Editions Les Belles Lettres, Paris, 2001] is proposed, which eliminates the systematic offsets seen in the discrepancies in timing of the sea level measurements. The tidal analysis has also shown that shallow-water tidal harmonics at Brest causes a systematic difference of 0.023 m between mean sea level (MSL) and mean tide level (MTL). Thus, MTL should not be mixed with the time series of MSL because of this systematic offset. The study of the trends in MTL and MSL however indicates that MTL can be used as a proxy for MSL. Three linear trend periods are distinguished in the Brest MTL time series over the period 1807–2004. Our results support the recent findings of Holgate and Woodworth (Geophys Res Lett) of an enhanced coastal sea level rise during the last decade compared to the global estimations of about 1.8 mm/year over longer periods (Douglas, J Geophys Res 96:6981–6992, 1991). The onset of the relatively large global sea level trends observed in the twentieth century is an important question in the science of climate change. Our findings point out to an ‘inflexion point’ at around 1890, which is remarkably close to that in 1880 found in the Liverpool record by Woodworth (Geophys Res Lett 26:1589–1592, 1999b).     

A computer simulation study of natural silicate melts. Part I: Low pressure properties

In implementing into a molecular dynamics simulation code a simple interionic potential developed to describe the nine component system K₂O-Na₂O-CaO-MgO-FeO-Fe₂O₃-Al₂O₃-TiO₂-SiO₂ (KNCMFATS), it has been possible to reproduce satisfactorily a number of thermodynamic, structural and transport properties of a representative set of natural silicate melts. An important conclusion reached in this study is the good transferability of the potential from felsic to ultramafic compositions although this transferability becomes less accurate with high silica contents (rhyolitic composition and beyond) and with very iron-rich silicates (e.g. fayalite). A key feature of the simulation is to make the link between macroscopic properties of the melt and its microscopic structure and dynamics. We thus obtain a relationship between the molar volume of the melt, the number of network modifiers and the oxygen coordination number. The simulation also allows one to quantify the coordination environment around the cations as function of the melt composition. Furthermore, the electrical conductivity of the high temperature liquid is investigated.     

Mass‐dependent fractionation of nickel isotopes in meteoritic metal

Abstract— We measured nickel isotopes via multicollector inductively coupled plasma mass spectrometry (MC‐ICPMS) in the bulk metal from 36 meteorites, including chondrites, pallasites, and irons (magmatic and non‐magmatic). The Ni isotopes in these meteorites are mass fractionated; the fractionation spans an overall range of ～0.4‰ amu^?1. The ranges of Ni isotopic compositions (relative to the SRM 986 Ni isotopic standard) in metal from iron meteorites (～0.0 to ～0.3‰ amu^?1) and chondrites (～0.0 to ～0.2‰ amu^?1) are similar, whereas the range in pallasite metal (～–0.1 to 0.0‰ amu^?1) appears distinct. The fractionation of Ni isotopes within a suite of fourteen IIIAB irons (～0.0 to ～0.3‰ amu^?1) spans the entire range measured in all magmatic irons. However, the degree of Ni isotopic fractionation in these samples does not correlate with their Ni content, suggesting that core crystallization did not fractionate Ni isotopes in a systematic way. We also measured the Ni and Fe isotopes in adjacent kamacite and taenite from the Toluca IAB iron meteorite. Nickel isotopes show clearly resolvable fractionation between these two phases; kamacite is heavier relative to taenite by ～0.4‰ amu^?1. In contrast, the Fe isotopes do not show a resolvable fractionation between kamacite and taenite. The observed isotopic compositions of kamacite and taenite can be understood in terms of kinetic fractionation due to diffusion of Ni during cooling of the Fe‐Ni alloy and the development of the Widmanstätten pattern.     

Sedimentary evidence of deglacial megafloods in the northern Gulf of Mexico (Pigmy Basin)

Cored sediments from the Pigmy Basin, northern Gulf of Mexico, were analyzed in order to better constrain late deglacial and early Holocene paleoenvironmental and sedimentary changes in response to North American climate evolution. Mineralogical and geochemical proxies indicate the succession of two sedimentary regimes: dominantly detrital during the deglaciation (15–12.9 cal ka BP) whereas biogenic contribution relatively increased later on during the Younger Dryas and early Holocene (12.9 and 10 cal ka BP). Geochemical data reveal that the deglacial record mainly reflects variations of terrigenous supply via the Mississippi River rather than modifications of redox conditions in the basin. Specific variations of almost all the parameters measured in this paper are synchronous with the main deglacial meltwater episode (Meltwater Spike) described or modeled in previous marine or continental studies. During this episode, most parameters display “stair-step-like” – pattern variations highlighting three successive steps within the main meltwater flow. Variations in grain-size and clay mineral assemblage recorded in the Pigmy Basin indicate that the erosional regime was very strong on land during the first part of the Meltwater Spike, and then milder, inducing more subtle modifications in the sedimentary regime in this part of the Gulf. Specific geochemical and mineralogical signatures (notably, clay minerals and trace metal geochemistry) pinpoint a dominant origin from NW North America for detrital particles reflecting meltwater outflow from the south-western Laurentide Ice Sheet (LIS) margin during the most intense freshwater discharge. The observed decrease of the sedimentation rate from about 200 to 25 cm/ka at ca 12.9 ka evidenced a drastic decrease of erosional processes during late phase of discharge, consistently with the hypotheses of major reduction of meltwater flow. The major modification at 12.9 cal ka BP is interpreted to result from both modifications of the main Mississippi fluvial regime due to eastward and northward rerouting of meltwater flow at the onset of the Younger Dryas, and the increase of sea-surface temperature linked to insolation. Finally, slight grain-size modifications suggest that some freshwater discharges may have episodically reached the Gulf of Mexico after the Younger Dryas reflecting possible small adjustments of the postglacial hydrological regime.     

Ca isotope cycling in a forested ecosystem

Reports of large Ca isotope fractionations between trees and soils prompted this study of a Boreal forest ecosystem near La Ronge, Saskatchewan, to improve understanding of this phenomenon. The results on five tree species (black spruce, trembling aspen, white spruce, jack pine, balsam poplar) confirm that nutrient Ca uptake by plants favors the light isotopes, thus driving residual Ca in plant available soil pools towards enrichment in the heavy isotopes. Substantial within-tree fraction occurs in tissues formed along the transpiration stream, with low δ⁴⁴Ca values in fine roots (2 mm), intermediate values in stemwood, and high values in foliage. Separation factors between different plant tissues are similar between species, but the initial fractionation step in the tips of the fine roots is species specific, and/or sensitive to the local soil environment. Soil water δ⁴⁴Ca values appear to increase with depth to at least 35 cm below the top of the forest floor, which is close to the deepest level of fine roots. The heavy plant fractionated signature of Ca in the finely rooted upper soils filters downward where it is retained on ion exchange sites, leached into groundwater, and discharged into surface waters.The relationship between Ca uptake by tree fine roots and the pattern of δ⁴⁴Ca enrichment with soil depth was modeled for two Ca pools: the forest floor (litter) and the underlying (upper B) mineral soil. Six study plots were investigated along two hillside toposequences trending upwards from a first order stream. We used allometric equations describing the Ca distribution in boreal tree species to calculate weighted average δ⁴⁴Ca values for the stands in each plot and estimate Ca uptake rates. The δ⁴⁴Ca value of precipitation was measured, and soil weathering signatures deduced, by acid leaching of lower B mineral soils. Steady state equations were used to derive a set of model Ca fluxes and fractionation factors for each plot. The model reproduces the increase in δ⁴⁴Ca with depth found in forest floor and upper B soil waters. Transient model runs show that the forest Ca cycle is sensitive to changes in plant Ca uptake rate, such as would occur during ontogeny or disturbance. Accordingly, secular records of δ⁴⁴Ca in tree ring cellulose have the potential to monitor changes in the forest Ca cycle through time, thus providing a new tool for evaluating natural and anthropogenic impacts on forest health. Another model run shows that by changing the size of the isotope fractionation factor and adjusting for differences in forest productivity, that the range in Ca isotope fractionation in forested ecosystems reported in the literature, thus far, is reproduced. As a quantitative tool, the Ca cycling model produces a reasonable set of relative Ca fluxes for the La Ronge site, consistent with Environment Canada’s measurements for wet deposition in the region and simulated Ca release from soil mineral weathering using the PROFILE model. But the sensitivity of the model is limited by the small range of fractionation observed in this boreal shield setting of ∼1‰, which limits accuracy. If the model were applied to a site with a greater range in δ⁴⁴Ca values among the principal Ca fluxes, it is capable of producing robust and reliable estimations of Ca fluxes that are otherwise difficult to measure in forested ecosystems.     

Tripartite climate reversal in Central Europe 5600-5300 years ago

The history of variations in water level of Lake Constance, as reconstructed from sediment and pollen analysis of a sediment sequence from the archaeological site of Arbon-Bleiche 3, shows an abrupt rise in lake level dendrochronologically dated to 5375 yr ago (5320 yr relative to AD 1950). This event, paralleled by the destruction of the Neolithic village by fire, provoked the abandonment of this prehistoric lake-shore location established in the former shallow bay of Arbon-Bleiche, and was the last of a series of three episodes of successively higher lake level, the first occurring at 5600-5500 cal yr B.P. The dendrochronologically dated rise event was synchronous with an abrupt increase in atmospheric ¹⁴C. This supports the hypothesis of an abrupt climate change forced by varying solar activity. Moreover, the three successive episodes of higher lake level between 5600 and 5300 cal yr B.P. at Arbon-Bleiche 3 coincided with climatic cooling and/or changes in moisture conditions in various regions of both hemispheres. This period corresponds to the mid-Holocene climate transition (onset of the Neoglaciation) and suggests inter-hemispheric linkages for the climate variations recorded at Arbon-Bleiche 3. This mid-Holocene climate reversal may have resulted from complex interactions between changes in orbital forcing, ocean circulation and solar activity. Finally, despite different seasonal hydrological regimes, the similarities between lake-level records from Lake Constance and from Jurassian lakes over the mid-Holocene period point to time scale as a crucial factor in considering the possible impact of climate change on environments.     

Single GPS receiver time-relative positioning with loop misclosure corrections

Time-relative positioning makes use of observations taken at two different epochs and stations with a single global positioning system (GPS) receiver to determine the position of the unknown station with respect to the known station. The limitation of this method is the degradation over time of the positioning accuracy due to the temporal variation of GPS errors (ionospheric delay, satellite clock corrections, satellite ephemerides, and tropospheric delay). The impact of these errors is significantly reduced by adding to the one-way move from the known to the unknown station, a back move to the known station. A loop misclosure is computed from the coordinates obtained at the known station at the beginning and at the end of the loop, and is used to correct the coordinates of the unknown station. The field tests, presented in this paper, show that using the loop misclosure corrections, time-relative positioning accuracy can be improved by about 60% when using single frequency data, and by about 40% with dual frequency data. For a 4-min processing interval (an 8-min loop) and a 95% probability level, errors remain under 20 cm for the horizontal components and 36 cm for the vertical component with single frequency data; and under 11 cm for the horizontal components and 29 cm for the vertical component with dual frequency data.