On Rhythmical Layering of Rocks Formed from Basaltic Magma

Formation of rhythmical layering in intrusive basic and ultrabasic rock bodies is explained in different ways, in particular, by the movement of microparticles (mineral clusters) of plagioclase and pyroxene within the basalt melt under the influence of thermal and gravitational forces. A model of cluster movement is proposed as a consequence of the forces appearing when ultrasonic elastic fluctuations pass through the melt. The model is based on fundamental dynamic equations. Depending on cluster density, wave parameters, and magmatic chamber size, in the melt there can form different combinations of rhythmically alternating layers of different composition.     

Changes in physical and chemical properties of three soil types in India as a result of amendment with fly ash and sewage sludge

The use of coal fly ash and domestic sewage sludge in agriculture is being considered as one of the methods for recycling of these wastes in an environmental beneficial manner. Mixtures with soil were prepared at different proportions of fly ash and sludge, either alone or in combination at a maximum application rate of 52 t ha^-1. The changes in the selected properties and heavy metal contents of three soil types in India were studied after incubating the respective mixtures for 90 days at near field capacity moisture level. Sewage sludge, due to its acidic and saline nature, high organic matter and heavy metals content, had more impact on soil properties than the fly ash. Sludge application produced several changes including an increase in available nitrogen, organic carbon, salinity and water-holding capacity of the soils. The concentrations of major cations and heavy metals also increased because of the sludge application and the pH was decreased. However, the levels of individual metal concentrations in all the mixture types were below the allowable limits prescribed by several environmental agencies. Using fly ash either alone or in equal quantity with sewage sludge had little influence on soil properties and heavy metal content. The relative availability (RA) of heavy metals in three soils amended with 52 t ha^-1 of sewage sludge was observed to be highest in oxisol, followed by alfisol and vertisol.     

Formation of Concentric Rings Around Sources

Zones of increased concentration formed by a solvent flowing from a source are considered. A matehmatical model for forming such zones is proposed. It takes into account that such a zone is composed of a set of independent particles. Hence the distribution of a substance around the source can be explained by movement of an individual particle. In the model this movement is a continuous semi-Markov process with terminal stopping at some random point in space. Parameters of the process depend on the velocity field of the flow. Forward and backward partial differential equations for the distribution density of a random stopping point of the process are derived. The forward equation is investigated for the centrally symmetric case. Solutions of the equation demonstrate either a maximum or a local minimum at the source location. In the latter case a concentric ring around the source is formed. If different substances vary in their absorption rates, they can form separable concentration zones as a family of concentric rings.     

Environmental impact of heavy-metal dispersion in the Huerva River (Iberian Range,NE Spain)

In this study, the methodology of geochemical prospecting has been applied to the study of cadmium, lead, copper and zinc dispersion in the fine sediments of the upper course of the Huerva River (Iberian Range, NE Spain). The survey was organised in two stages: (1) general sampling along the river and its tributary channels, aimed at selecting the sections with the highest contents of the target elements, and (2) detailed study of those sections, aimed at an interpretation of possible positive geochemical anomalies and identification of their sources. The results of this study prove the existence of multiple and complex sources, with a significant influence of sources related to anthropogenic activity. However, the system shows a good ability to depurate itself under current conditions.     

Origin of Hydrocarbons in Hydrothermal Sulfide Ores in the Mid-Atlantic Ridge

The Rainbow hydrothermal field (36° N Mid-Atlantic Ridge) is one of the three presently known fields related to serpentinization of ultramafic rocks accompanied by the formation of hydrogen- and methane-rich solutions. Gas chromatographic (GC) and molecular gas chromatographic–mass spectrometric (GC-MS) investigations of sulfide ores and sediments from this field confirmed a predominantly biological nature of bitumoids related to the high-temperature transformation of biomass of the hydrothermal biological community. At the same time, ores of the Rainbow field contain significant amounts of compounds that are not directly related to biogenic synthesis. This fact suggests the possibility of an abiogenic synthesis of methane and even complex hydrocarbons during the serpentinization of ultramafic rocks.     

Surface-water quality for the Salí River watershed in NW Argentina

Spatial and temporal variations of Na, Mg, Si, K, Ca, SO₄^2-, Cl^-, HCO₃^-, Ag, Al, As, Au, B, Ba, Be, Bi, Br, Ce, Cd, Co, Cr, Cs, Cu, Dy, Er, Eu, F, Fe, Ga, Ge, Gd, Hf, Hg, Ho, I, La, Li, Mn, Mo, Nb, Nd, Ni, P, Pb, Pr, Rb, Sb, Sm, Sn, Sr, Ta, Tb, Te, Th, Ti, Tl, U, V, W, Y, Yb, Zn, and Zr were monitored through 37 sampling stations to determine the main aspects influencing the surface-water quality in the Salí River watershed (Tucumán Province, NW Argentina). The influence of the regional geological setting on water chemistry allows to distinguish three sub-basins. The interaction with sedimentary rocks was found to be dominant in the northern and central-eastern sub-basin as well as in the southern sub-basin, whereas the metamorphic-granitic basement of the Pampean Ranges was noted in the central sub-basin. In addition, anthropogenic activities affect the spatial variation of K, P, Mn, Rb, and Pb as well as dissolved oxygen concentrations and Eh. Temporal water-quality variation is related to the spatial distribution of precipitation and to the seasonal character of the main local industries (sugar cane, alcohol, citrus), increasing P and K concentrations and decreasing dissolved oxygen concentration and Eh in winter. Cl^-, Na, SO₄^2-, Al, As, B, Fe, Mn, Se and U concentrations exceed the regulated drinking-water thresholds at several sampling stations.     

Separate lead isotope analyses of leachate and residue rock fractions: implications for metal source tracing in ore deposit studies

Separate lead isotope analyses of leachate and residue fractions are applied to a broad spectrum of rocks commonly investigated in metallogenic studies. Resulting data highlight a systematic behavior of leachate and residue fractions with respect to lead isotope compositions, which essentially depends on the mineralogical composition of the rock. Granitoid and high-grade metamorphic rocks have residue compositions virtually identical to common lead. In contrast, low-grade metasedimentary rocks may have residue compositions swamped by radiogenic lead of leach-resistant zircons. Mafic magmatic rocks have residues that are often more radiogenic than leachates, depending on the ratio of leach-refractory zircons to common lead in the residual fraction of these rocks. Separate leachate and residue analyses of source rocks provide two lead isotope end members whose mixture may represent lead with the appropriate ore fluid composition. Our leaching experiments indicate that hot acid solutions (and by inference hydrothermal fluids) preferentially leach radiogenic lead from medium- to high-grade metamorphic and granitoid rocks, whereas they preferentially leach common lead from low-grade metasedimentary and mafic magmatic rocks. The method presented in this study provides a reliable alternative to other methods (i.e., age-correction of bulk-rock compositions) for the determination of the common lead signature of felsic to intermediate magmatic rocks. This may be preferable to age-corrected bulk-rock analyses, where ages to apply for corrections of bulk-rock data are not known or where moderately to highly altered rocks must be used. Case studies of orogenic gold and MVT districts of Peru (Pataz and San Vicente, respectively) show that separate leachate and residue lead isotope analyses carried out systematically on whole rocks allow a more thorough evaluation of metal source reservoirs than does the standard method of age-corrected or uncorrected bulk-rock analyses.     

Data Assimilation (4D-VAR) for Shallow-Water Flow: The Case of the Chicoutimi River

This is a web presentation of the work presented at the 10th Annual Conference of the CFD Society of Canada, “CFD 2002”, at the University of Windsor on June 9-11, 2002. This discussion paper presents the four-dimensional variational data assimilation (4D-VAR) technique as a tool to forecast floods. This discussion will be limited to hydrological forecast. We assume that the weather, here a large rainstorm, had already been forecasted by the meteorological services. In the 4D-VAR technique, we need to minimize, in the sense of Lagrange, a cost function which measures the difference between the forecast and the observations. The physical equations acts as a set of constraints. Here, the model is the shallow-water equations modified to include sediment transport. The minimum was found by using the steepest descent algorithm. This is made possible because the gradient of the cost function can be calculated analytically by using the adjoint equations of the model. To illustrate the 4D-VAR technique, the bypass of a simple theoretical dam as well as the more complex overflowing of the Chicoutimi River at the Chute-Garneau dam (during the 1996 flood) are investigated.     

Fault plane solutions of the january 26th, 2001 bhuj earthquake sequence

A 12-station temporary microearthquake network was established by the Geological Survey of India for aftershock monitoring of the January 26th, 2001 Bhuj earthquake (M _w 7.6) in the Kutch district of Gujarat state, western India. The epicentres of the aftershocks show two major trends: one in the NE direction and the other in the NW direction. Fault-plane solutions of the best-located and selected cluster of events that occurred along the NE trend, at a depth of 15–38 km, show reverse faulting with a large left-lateral strike-slip motion, which are comparable with the main-shock solution. The NW trending upper crustal aftershocks at depth <10 km, on the other hand, show reverse faulting with right-lateral strike-slip motion, and the mid crustal and lower crustal aftershocks, at a depth of 15–38 km, show pure reverse faulting as well as reverse faulting with right-lateral and left-lateral strike-slip motions; these solutions are not comparable with the main-shock solution. It is inferred that the intersection of two faults has been the source area for stress concentration to generate the main shock and the aftershocks.     

The Traigh Bhan na Sgurra Sill, Isle of Mull: Flow Localization in a Major Magma Conduit

Field evidence points to localization of magma flowing in aTertiary doleritic sill on the Isle of Mull, Inner Hebrides,Scotland. Regions of the sill in which flow was short-livedhave chilled margins, a narrow or absent metamorphic aureole,and alignment of plagioclase crystals resulting in pronounced,flow-parallel, lineations on fracture surfaces (Type I regions).Prolonged flow resulted in blocky, coarse-grained dolerite withno chilled margins, and an extensive metamorphic aureole (TypeII regions). The distribution of Type I and Type II regionsshows no spatial pattern, with stagnant solidifying sectionsimmediately adjacent to sections with contemporaneous activeand sustained flow. The transition between Type I and Type IIregions occurs as the sill thickness exceeds 3·5 m. Ourobservation that sustained flow was only possible in regionsof the sill thicker than 3.5 m is consistent with previouslypublished theoretical models which predict a critical sill thicknessin the range 2·2–5 m. Regions of the sill narrowerthan this experienced a single injection of magma. Simple modelsto determine flow duration from the width of the metamorphicaureole demonstrate that progressive focusing of flow into widerparts of the conduit created discrete channels active for upto 5 months. KEY WORDS: flow localization; magma; Mull; sill; Traigh Bhàn na Sgùrra