The Ernest Henry Cu–Au deposit was formed within a zoned, post-peak metamorphic hydrothermal system that overprinted metamorphosed dacite, andesite and diorite (ca 1740–1660 Ma). The Ernest Henry hydrothermal system was formed by two cycles of sodic and potassic alteration where biotite–magnetite alteration produced in the first cycle formed ca 1514±24 Ma, whereas paragenetically later Na–Ca veining formed ca 1529 +11/−8 Ma. These new U–Pbtitanite age dates support textural evidence for incursion of hydrothermal fluids after the metamorphic peak, and overlap with earlier estimates for the timing of Cu–Au mineralization (ca 1540–1500 Ma). A distal to proximal potassic alteration zone correlates with a large (up to 1.5 km) K–Fe–Mn–Ba enriched alteration zone that overprints earlier sodic alteration. Mass balance analysis indicates that K–Fe–Mn–Ba alteration—largely produced during pre-ore biotite- and magnetite-rich alteration—is associated with K–Rb–Cl–Ba–Fe–Mn and As enrichment and Na, Ca and Sr depletion. The aforementioned chemical exchange almost precisely counterbalances the mass changes associated with regional Na–Ca alteration. This initial transition from sodic to potassic alteration may have been formed during the evolution of a single fluid that evolved via alkali exchange during progressive fluid-rock interaction. Cu–Au ore, dominated by co-precipitated magnetite, minor specular hematite, and chalcopyrite as breccia matrix, forms a pipe-like body at the core of a proximal alteration zone dominated by K-feldspar alteration. Both the core and K-feldspar alteration overprint Na–Ca alteration and biotite–magnetite (K–Fe) alteration. Ore was associated with the concentration of a diverse range of elements (e.g. Cu, Au, Fe, Mo, U, Sb, W, Sn, Bi, Ag, F, REE, K, S, As, Co, Ba and Ca). Mineralization also involved the deposition of significant barite, K(–Ba)–feldspar, calcite, fluorite and complexly zoned pyrite. The complexly zoned pyrite and variable K–(Ba)–feldspar versus barite associations are interpreted to indicate fluctuating sulphur and/or barium supply. Together with the alteration zonation geochemistry and overprinting criteria, these data are interpreted to indicate that Cu–Au mineralization occurred as a result of fluid mixing during dilation and brecciation, in the location of the most intense initial potassic alteration. A link between early alteration (Na–Ca and K–Fe) and the later K-feldspathization and the Cu–Au ore is possible. However, the ore-related enrichments in particular elements (especially Ba, Mn, As, Mo, Ag, U, Sb and Bi) are so extreme compared with earlier alteration that another fluid, possibly magmatic in origin, contributed the diverse element suite geochemically independently of the earlier stages. Structural focussing of successive stages produced the distinctive alteration zoning, providing a basis both for exploration for similar deposits, and for an understanding of ore genesis. 相似文献
Although cliffs form approximately 75% of the world's coastline, the understanding of the processes through which they evolve remains limited because of a lack of quantitative data on the morphological changes they undergo. In this paper the combination of terrestrial time-of-flight laser scanning with high-resolution digital photogrammetry is examined to generate high-quality data-sets pertaining to the geomorphic processes governing cliff development. The study was undertaken on a section of hard rock cliffs in North Yorkshire, UK, which has been monitored over a 12-month period. High-density, laser-scanned point clouds have been used to produce an accurate representation of these complex surfaces, free from the optical variations that degrade photographic data. These data-sets have been combined with high-resolution photographic monitoring, resampled with the fixed accuracies of the terrestrial laser survey, to generate a new approach to recording the volumetric changes in complex coastal cliffs. This has led to significant improvements in the understanding of the activity patterns of coastal cliffs. 相似文献
A large aperture scintillometer (LAS) andradio wave scintillometer (RWS)were installed over a heterogeneous areato test the applicability of the scintillation method.The heterogeneity in the area, whichconsisted of many plots, was mainly caused bydifferences in thermal properties ofthe crops; the variations in theaerodynamic roughness lengthwere small. The water vapour fluxesderived from the combined LAS-RWSsystem, also known as the two-wavelengthmethod, agreed fairly well with the aggregatedwater vapour fluxes derived from in-situeddy covariance measurements. The water vapourfluxes derived from a stand-alone LASare also presented. It was found that a single LASand an estimate of the area averagedavailable energy (using a simple parameterisationscheme) can provide also reasonablearea-averaged water vapour fluxes. 相似文献
The solubility of Ti- and P-rich accessory minerals has been examined as a function of pressure and K2O/Na2O ratio in two series of highly evolved silicate systems. These systems correspond to (a) alkaline, varying from alkaline to peralkaline with increasing K2O/Na2O ratio; and (b) strongly metaluminous (essentially trondhjemitic at the lowest K2O/Na2O ratio) and remaining metaluminous with increasing K2O/Na2O ratio (to 3). The experiments were conducted at a fixed temperature of 1000 °C, with water contents varying from 5 wt.% at low pressure (0.5 GPa), increasing through 5–10 wt.% at 1.5–2.5 GPa to 10 wt.% at 3.5 GPa. Pressure was extended outside the normal crustal range, so that the results may also be applied to derivation of hydrous silicic melts from subducted oceanic crust.
For the alkaline composition series, the TiO2 content of the melt at Ti-rich mineral saturation decreases with increasing pressure but is unchanged with increasing K content (at fixed pressure). The P2O5 content of the alkaline melts at apatite saturation increases with increased pressure at 3.5 GPa only, but decreases with increasing K content (and peralkalinity). For the metaluminous composition series (termed as “trondhjemite-based series” (T series)), the TiO2 content of the melt at Ti-rich mineral saturation decreases with increasing pressure and with increasing K content (at fixed pressure). The P2O5 content of the T series melts at apatite saturation is unchanged with increasing pressure, but decreases with increasing K content. The contrasting results for P and Ti saturation levels, as a function of pressure in both compositions, point to contrasting behaviour of Ti and P in the structure of evolved silicate melts. Ti content at Ti-rich mineral saturation is lower in the alkaline compared with the T series at 0.5 GPa, but is similar at higher pressures, whereas P content at apatite saturation is lower in the T series at all pressures studied. The results have application to A-type granite suites that are alkaline to peralkaline, and to I-type metaluminous suites that frequently exhibit differing K2O/Na2O ratios from one suite to another. 相似文献
This study examines skateboarding as a transgressive activity in different inner Newcastle public spaces, highlighting the way certain places are constructed, and the values and meanings attached to them. Skateboarding has been sanctioned in some places, but is considered to be inappropriate in others, resulting in the implementation of skating restrictions in specific areas. Transgressive conduct is different from the norm and appears to be ‘out of place’. However, labels of ‘in’ and ‘out’ of place are too simplistic, because transgression is more nuanced and can simultaneously operate at multiple scales. Some skateboarding activities and locations are seen as more legitimate than others, and so a skater can be both ‘in place’ and ‘out of place’ at the same time. Problems and inconsistencies in the regulation of public space are revealed, because although skateboarding may be illegal in some places, the regulations are blunted by limited enforcement, justified by distinctions between ‘good’ and ‘bad’ skateboarding. 相似文献
A focused ion beam of Ga ions is a relatively new technique that has been developed for microelectronic industries. Now researchers of the Earth sciences find it to be a promising tool for studying various geological materials. Using the FIB technique and an FEI Strata DB 235 dual beam system, we have successfully prepared several electron-transparent foils, which crossed μm-sized diamonds included in host minerals such as zircon and garnet from quartzofeldspathic rocks of the Saxonian Erzgebirge, Germany. Scanning and transmission electron microscopy applied to these foils revealed that the diamonds contain crystalline nanometric inclusions. These inclusions consist of minerals of known stoichiometries such as SiO2 and Al2SiO5, whereas others are characterized by different combinations of Si, K, P, Ti, and Fe in the presence of oxygen (stoichiometries are not clear at this stage of research). One suite of inclusions is assumed to be represented by archerite, KH2PO4, which is known to be stable at pressures of 4–22 GPa, and one nanocrystal containing Pb, oxygen and carbon is interpreted to be PbxOy or PbCO3. Along with solid crystalline inclusions, the diamonds contain cavities filled by liquid/gas that escaped during sample preparation. These are associated with dislocations of diamond growth. Our data are consistent with the concept of diamond crystallization from a COH-rich multicomponent supercritical fluid and suggest that the composition of such a fluid is more consistent with a local crustal source rather than that of a mantle origin. 相似文献
This contribution presents a review of the recent developments in laser ablation inductively coupled plasma-mass spectrometry. We describe the important developments which have occurred in the laser systems used, leading to a spatial resolution of around 20 (im, and give an overview of the major instrument developments which have affected the geological applications of laser ablation ICP-MS. We describe the calibration of laser ablation for the analysis of trace elements in two different matrices: volcanic glass shards and sulfide minerals. We show how single glass shards can be analysed using the National Institute of Standards and Technology (NIST) glass certified reference materials for calibration and demonstrate the effect of using single spot analyses compared to rastering of the calibration sample. We show the importance of inter-shard variation and demonstrate that averaged single shard analyses produce data which compare well with bulk analyses. The calibration of the laser system for sulfide mineral analysis is discussed and two different strategies are proposed, one using spiked pressed powder pellets of sulfides and the other metal reference materials. We present conclusions and recommendations for the calibration of laser ablation ICP-MS instruments. 相似文献
Tertiary continental flood basalts on Qeqertarssuaq and Nuussuaq in West Greenland contain ~3?km of picrites and variably contaminated tholeiites. The picrites are in the Naujánguit member of the Vaïgat Formation and they have 7–29?wt% MgO, La/Sm?=?0.9–2.1, and 143Nd/144Nd?=?0.51263–0.51307. They appear to have crystallised from high-Mg parental magmas (14.4–16.4?wt% MgO) with isotope and trace element ratios similar to recent Icelandic picrites. Discrete horizons of tholeiites, including the Asûk and?Kûgánguaq, have elevated SiO2 (50–58 wt%), La/Sm?=?3–7, 87Sr/86Sr?=?0.70550–0.71224, and low 143Nd/144Nd?=?0.51234–0.51174. These lavas have low Cu and Ni abundances (typically 10–50?ppm Ni or Cu), and in the case of the Asûk on Qeqertarssuaq, they contain droplets of native iron. The low Cu and Ni contents are attributed to scavenging by magmatic sulphides formed in response to crustal contamination of picritic magmas. Two contamination trends are recognised, one to a sediment end-member with high Th/Nb and Archaean model Nd ages, and the other to a meta-igneous component with high La/Sm, low Th/Nb and Rb/Nb, and Proterozoic source ages. Overall, 206Pb/204Pb varies from 16.47–21.68. Both contamination trends are associated with low Cu and Ni, and high SiO2, and it is argued that the magmatic sulphides were triggered by the increases in silica, rather than simply by the introduction of additional crustal-derived sulphur. Geochemically, the Asûk and Kûgánguaq rocks resemble the most contaminated Nadezhdinsky lavas of the Siberian Trap, which are widely regarded as the source of the Ni and Cu mineralisation in the giant Noril'sk deposits. Mass balance considerations indicate that the parental liquids to the contaminated magmas contained sufficient Ni, Cu, S and platinum group elements to form substantial magmatic sulphide deposits. However, unlike the lavas at Noril'sk, the contaminated (low Cu and Ni) West Greenland basalts are in isolated units with no evidence for a gradual recovery in Ni and Cu abundances with height in the lava column. Comparison with Noril'sk suggests that although significant quantities of metals were scavenged by sulphides in West Greenland, the metal contents of the sulphides may not have been upgraded by continued interaction with subsequent magma batches. 相似文献
Metallogenic provinces in Europe range in age from the Archaean to the Neogene. Deposit types include porphyry copper and epithermal Cu–Au, volcanic-hosted massive sulphide (VMS), orogenic gold, Fe-oxide–Cu–Au, anorthosite Fe–Ti-oxide and sediment-hosted base-metal deposits. Most of them formed during short-lived magmatic events in a wide range of tectonic settings; many can be related to specific tectonic processes such as subduction, hinge retreat, accretion of island arcs, continental collision, lithosphere delamination or slab tear. In contrast, most sediment-hosted deposits in Europe evolved in extensional, continental settings over significant periods of time. In Europe, as elsewhere, ore formation is an integral part of the geodynamic evolution of the Earth's crust and mantle. Many tectonic settings create conditions conducive to the generation of water-rich magma, but the generation of ore deposits appears to be restricted to locations and short periods of change in temperature and stress, imposed by transitory plate motions. Crustal influence is evident in the strong structural controls on the location and morphology of many ore deposits in Europe. Crustal-scale fault–fracture systems, many involving strike-slip elements, have provided the fabric for major plumbing systems. Rapid uplift, as in metamorphic core complexes, and hydraulic fracturing can generate or focus magmatic–hydrothermal fluid flow that may be active for time spans significantly less than a million years. Once a hydrologically stable flow is established, ore formation is strongly dependent on the steep temperature and pressure gradients experienced by the fluid, particularly within the upper crust. In Europe, significant fracture porosity deep in the crystalline basement (1%) is not only important for magmatic–hydrothermal systems, but allows brines to circulate down through sedimentary basins and then episodically upward, expelled seismically to produce sediment-hosted base-metal deposits and Kupferschiefer copper deposits. Emerging research, stimulated by GEODE, can improve the predicting power of numerical simulations of ore-forming processes and help discover the presence of orebodies beneath barren overburden. 相似文献