The Cretaceous and younger thermal history of the KTB site (Germany): apatite fission-track data from the Vorbohrung

A detailed fission-track analysis was carried out on 41 apatite samples from the 4001-m-deep pilot hole of the German Continental Deep Drilling Program (KTB). The investigations include dating by the population method and length measurements of horizontal confined tracks. Age and length information indicate that all samples above the present-day partial annealing zone cooled from temperatures above 120?°C in the Cretaceous. The top two kilometres of the profile show less variation of age with depth than was expected. Modelling of the profile indicates that the distribution of fission track ages with depth requires that the profile was disturbed during or after cooling through the partial annealing zone. Modelling of individual samples reveals that at least the upper 2?km experienced reverse faulting, effectively thickening the upper part of the rock column by up to 1000?m in the Tertiary. A present-day partial annealing zone for apatite was observed between 2000 and 4000?m (～60–110?°C). This confirms earlier in situ observations of the position of the partial annealing zone.     

Mechanical aspects of sedimentary basin formation: development of integrated models for lithospheric and surface processes

Different assumptions for the thermo-mechanical properties of the lithosphere strongly affect predictions inferred from quantitative sedimentary basin modeling. Examples from various basins, selected as natural laboratories, illustrate the importance of incorporating a finite strength of the extending lithosphere in forward stratigraphic modeling of large-scale basin stratigraphy. Current models can effectively couple erosion at uplifted rift shoulders of extensional basins with the basin fill architecture of the subsiding basin compartments. Modeling of the synrift strata integrates spatial scales characteristic for subbasins, such as the Oseberg field in the North Sea, with large-scale lithospheric properties characterizing the bulk strength of extending lithosphere. Modeling of compressional basins in foreland fold-and-thrust-belt settings can effectively link lithospheric flexure with surface processes. Scales pertinent to short-term spatial and temporal variations in basin fill and basin deformation can now be addressed, allowing the quantitative investigation of consequences of different modes of thrusting for basin fill geometry and facies characteristics.     

Water-quality trends in White Rock Creek Basin from 1912-1994 identified using sediment cores from White Rock Lake reservoir, Dallas, Texas

Historical trends in selected water-quality variables from 1912 to 1994 in White Rock Creek Basin were identified by dated sediment cores from White Rock Lake. White Rock Lake is a 4.4-km² reservoir filled in 1912 and located on the north side of Dallas, Texas, with a drainage area of 259 km². Agriculture dominated land use in White Rock Creek Basin before about 1950. By 1990, 72% of the basin was urban. Sediment cores were dated using cesium-137 and core lithology. Major element concentrations changed, and sedimentation rates and percentage of clay-sized particles in sediments decreased beginning in about 1952 in response to the change in land use. Lead concentrations, normalized with respect to aluminum, were six times larger in sediment deposited in about 1978 than in pre-1952 sediment. Following the introduction of unleaded gasoline in the 1970s, normalized lead concentrations in sediment declined and stabilized at about two and one-half times the pre-1952 level. Normalized zinc and arsenic concentrations increased 66 and 76%, respectively, from before 1952 to 1994. No organochlorine compounds were detected in sediments deposited prior to about 1940. Concentrations of polychlorinated biphenyls (PCB) and DDE (a metabolite of DDT) increased rapidly beginning in the 1940s and peaked in the 1960s at 21 and 20 µg kg^-1, respectively, which is coincident with their peak use in the United States. Concentrations of both declined about an order of magnitude from the 1960s to the 1990s to 3.0 and 2.0 µg kg^-1, respectively. Chlordane and dieldrin concentrations increased during the 1970s and 1980s. The largest chlordane concentration was 8.0 µg kg^-1 and occurred in a sediment sample deposited in about 1990. The largest dieldrin concentration was 0.7 µg kg^-1 and occurred in the most recent sample deposited in the early 1990s. Agricultural use of chlordane and dieldrin was restricted in the 1970s; however, both were used as termiticides, and urban use of chlordane continued at least until 1990. Recent use of dieldrin and aldrin, which degrades to dieldrin, has not been reported; however, increasing trends in dieldrin since the 1970s suggest recent urban use could have occurred.     

Remote sensing techniques for landslide studies and hazard zonation in Europe

An inventory is presented of researches concerning the use of remote sensing for landslide studies and hazard zonation as mainly carried out in the countries belonging to the European Community. An overview is given of the applicability of remote sensing in the following phases of landslide studies:

1. (1) Detection and classification of landslides. Special emphasis is given to the types of imagery required at different scales of analysis.

2. (2) Monitoring the activity of existing landslides using G.P.S., photogrammetrical techniques and radar interferometry.

3. (3) Analysis and prediction in space and time of slope failures. The different factors required in a landslide hazard study are evaluated, and the optimum remote sensing imagery for obtaining each of these factors is indicated.

Examples are given of research work carried out in these three phases from EC countries. Finally an evaluation is given of the aspects of uncertainty associated with the use of remote sensing data, and conclusions are given as to the incorporation of remote sensing techniques within the overall framework of techniques.     

Palaeoecology and Archaeology of the Kärlich–Seeufer Open-Air Site (Middle Pleistocene) in the Central Rhineland, Germany

The Kärlich–Seeufer archaeological site in Germany's central Rhineland was excavated between 1980 and 1992. The site provides evidence for hominid activity during a Middle Pleistocene interglaciation known up to now only from the Kärlich clay pit and therefore defined as the Kärlich Interglaciation, which is considered to be post-Cromer IV and pre-Holstein (sensu stricto) in age. The site is characterized by Acheulean artifacts, a fauna dominated byElephas (Palaeoloxodon) antiquus,and a unique and outstanding preservation of wooden and other palaeobotanical remains. Assuming all finds are associated, the site previously was interpreted as an elephant hunting camp with a wooden structure, together with wood and bone implements preservedin situ.Recent analysis of the same features has shown that the site can also be interpreted as a reworked archaeological sample. Hominid occupation occurred in the vicinity of a small lake with prevailing meso-oligotrophic conditions. Expanding boreal forests and fen vegetation characterized the landscape.     

Numerical Studies with a Regional Atmospheric Climate Model Based on Changes in the Roughness Length for Momentum and Heat Over Antarctica

A regional atmospheric climate model is used toexamine the effect of changes in the roughnesslengths of momentum (_z0m) and heat (_z0h)on the structure of the lower atmosphere and on thesurface energy fluxes over Antarctica. Fourexperiments were carried out in which _z0mand/or _z0h were altered with respect to acontrol experiment. The changes consisted of (1) alowering of _z0m from a field aggregated froma vegetation map with an orographic correction basedon the European Centre for Medium-Range WeatherForecasts _z0m field, to a constant value of10^-3 m; and (2) a lowering of _z0h from a valueequal to _z0m to a constant value of 10^-3 mor a value dependent on the wind speed via a surfacerenewal model. A reduction of _z0m results in theexpected increase in near-surface wind speed. It alsoresults in an increase in the depth of the layer in whichsouth-easterly near-surface winds prevail, and in adecrease in the strength of the large-scale flow overthe continent, in particular in summer. In theescarpment region a decrease of _z0m is foundto result in too high wind speeds. Surface temperatureson average decrease while atmospheric temperaturesincrease, resulting in an increase of near-surfacestatic stability. Changes in roughness lengths donot significantly change the temperature profiles.The surface fluxes, on average found reduced, aremodelled best by using the _z0h based on thesurface renewal method.     

Use of microtremor measurement for assessing site effects in Northern Belgium – interpretation of the observed intensity during the MS = 5.0 June 11 1938 earthquake

To provide quantitative information on site effects in the northern part of Belgium, forty-seven H/V microtremor measurements were performed with 5 second seismometers over an area of about 15.000 km². Most of the results show a northward regular increase of the fundamental period in agreement with the augmentation of the Mesozoic and Cainozoic soft sedimentsthickness from a few meters 40 km south of Brussels to 900 m at the Netherlands-Belgium border. The measured resonance frequency values wereconsistent with theoretical computations performed at different sites onthe basis of existing information and shallow seismic experiments. At oneparticular site (Uccle) where borehole data were available, microtremor measurements using an array of four seismological stations with differentapertures allowed to obtain the low frequency part of the Rayleigh wave dispersion curve, extending the range covered by the analysis of surfacewaves artificially generated. The Vs profile derived from the surface waveinversion corroborates the 1 Hz natural frequency of the site. Comparison of these results with the macroseismic information concerning the M_S = 5.0 1938 earthquake which occurred 50 km west of Brussels,confirmed the hypothesis that the geological structure of the Brabant massifis likely to control damage distribution during such an earthquake. Comparisonbetween the intensity map of the 1938 earthquake and the resonance period ofsediments obtained by our microtremor study shows a clear relation betweenthe two parameters. During the 1938 earthquake, site effects played a prominent role due to the dimension of the source whose corner frequency wasabout 1 Hz.     

An attenuation model for distant earthquakes

Large magnitude earthquakes generated at source–site distances exceeding 100km are typified by low‐frequency (long‐period) seismic waves. Such induced ground shaking can be disproportionately destructive due to its high displacement, and possibly high velocity, shaking characteristics. Distant earthquakes represent a potentially significant safety hazard in certain low and moderate seismic regions where seismic activity is governed by major distant sources as opposed to nearby (regional) background sources. Examples are parts of the Indian sub‐continent, Eastern China and Indo‐China. The majority of ground motion attenuation relationships currently available for applications in active seismic regions may not be suitable for handling long‐distance attenuation, since the significance of distant earthquakes is mainly confined to certain low to moderate seismicity regions. Thus, the effects of distant earthquakes are often not accurately represented by conventional empirical models which were typically developed from curve‐fitting earthquake strong‐motion data from active seismic regions. Numerous well‐known existing attenuation relationships are evaluated in this paper, to highlight their limitations in long‐distance applications. In contrast, basic seismological parameters such as the Quality factor (Q‐factor) could provide a far more accurate representation for the distant attenuation behaviour of a region, but such information is seldom used by engineers in any direct manner. The aim of this paper is to develop a set of relationships that provide a convenient link between the seismological Q‐factor (amongst other factors) and response spectrum attenuation. The use of Q as an input parameter to the proposed model enables valuable local seismological information to be incorporated directly into response spectrum predictions. The application of this new modelling approach is demonstrated by examples based on the Chi‐Chi earthquake (Taiwan and South China), Gujarat earthquake (Northwest India), Nisqually earthquake (region surrounding Seattle) and Sumatran‐fault earthquake (recorded in Singapore). Field recordings have been obtained from these events for comparison with the proposed model. The accuracy of the stochastic simulations and the regression analysis have been confirmed by comparisons between the model calculations and the actual field observations. It is emphasized that obtaining representative estimates for Q for input into the model is equally important.Thus, this paper forms part of the long‐term objective of the authors to develop more effective communications across the engineering and seismological disciplines. Copyright © 2003 John Wiley & Sons, Ltd.     

The International Laser Ranging Service and its support for IGGOS

The International Laser Ranging Service (ILRS) was established in September 1998 as a service within the IAG to support programs in geodetic, geophysical, and lunar research activities and to provide data products to the International Earth Rotation Service (IERS) in support of its prime objectives. Now in operation for 5 years, the ILRS develops: (1) the standards and specifications necessary for product consistency and (2) the priorities and tracking strategies required to maximize network efficiency. The service collects, merges, analyzes, archives and distributes satellite and lunar laser ranging data to satisfy a variety of scientific, engineering, and operational needs and encourages the application of new technologies to enhance the quality, quantity, and cost effectiveness of its data products. The ILRS works with: (1) the global network to improve station performance; (2) new satellite missions in the design and building of retroreflector targets to maximize data quality and quantity and (3) science programs to optimize scientific data yield. The ILRS Central Bureau maintains a comprehensive web site as the primary vehicle for the distribution of information within the ILRS community. The site, which can be accessed at: http://ilrs.gsfc.nasa.gov is also available at mirrored sites at the Communications Research Laboratory (CRL) in Tokyo and the European Data Center (EDC) in Munich.During the last 2 years, the ILRS has addressed very important challenges: (1) data from the field stations are now submitted hourly and made available immediately through the data centers for access by the user community; (2) tracking on low satellites has been significantly improved through the sub-daily issue of predictions, drag functions, and the real-time exchange of time biases; (3) analysis products are now submitted in SINEX format for compatibility with the other space geodesy techniques; (4) the Analysis Working Group is heavily engaged in Pilot Projects as it works toward an ILRS “standard” global solution and (5) SLR has significantly increased its participation in the International Terrestrial Reference Frame (ITRF) activity, which is important to the success of IGGOS.