Ancient harbors and Holocene morphogenesis of the Ras Ibn Hani peninsula (Syria)

Ras Ibn Hani peninsula, a wave-dominated tombolo (800 × 1000 m) on the Syrian coast, provides evidence for significant Holocene changes that can be linked to geological inheritance, rising post-glacial sea level, sediment supply and human impacts. Initial development of Ras Ibn Hani's coastal system began ~ 8000 years ago when shallow marine environments formed in a context of rising post-glacial sea level. Following relative sea-level stabilization ~ 6000 cal yr BP, beach facies trace the gradual formation of a wave-dominated sandbank fronted by a ~ 2300 × ~ 500 m palaeo-island whose environmental potentiality was attractive to Bronze Age societies. A particularly rapid phase of tombolo accretion is observed after ~ 3500 cal yr BP characterised by a two- to fourfold increase in sedimentation rates. This is consistent with (i) a pulse in sediment supply probably driven by Bronze Age/Iron Age soil erosion in local catchments, and (ii) positive feedback mechanisms linked to regionally attested neotectonics. Archaeological remains and radiocarbon datings confirm that the subaerial tombolo was probably in place by the Late Bronze Age. These data fit tightly with other eastern Mediterranean tombolo systems suggesting that there is a great deal of predictability to their geology and stratigraphy at the regional scale.     

Site effect assessment using KiK-net data: part 2—site amplification prediction equation based on f<Subscript>0</Subscript> and Vsz

This paper presents empirical correlations between amplification factors and simple site parameters derived from a large subset of the KiK-net data. The amplification factor is estimated from the ratios between the surface and down-hole horizontal response spectra, corrected for the varying depths and impedance of the down-hole sites (Cadet et al. in Site effect assessment using KiK-net data—part 1—a simple correction procedure for surface/downhole spectral ratios, 2011). Several site parameters are selected on the basis of their simplicity and availability at relatively low cost. They are the shallow time-average velocities V_SZ, with z equal to 5, 10, 20 and 30 m, and the fundamental frequency f₀. The amplification factors are then correlated with each of the individual site parameters; four other “twin-parameter”—couples (f₀, V_SZ)—are also considered and the correlation with amplification factors is performed through a normalization of the frequencies by each site fundamental frequency. The quality of the correlations is given by a misfit compared with the original data variance. The largest variance reduction is obtained with twin-parameter characterizations, out of which the couple (f₀, V_S30) proves to provide the lower misfit. The performance of single parameter correlations is relatively lower; however, the best single parameter proves to be the fundamental frequency, which provides smaller misfit than the Vsz parameters. A comparison is also performed with the amplification factors recommended in European regulations, showing that it is possible right now to significantly improve both the site characterization criteria and the associated amplification factors, for use in building codes and microzonation studies.     

Fishing‐induced evolution of growth: concepts,mechanisms and the empirical evidence

The interest in fishing‐induced life‐history evolution has been growing in the last decade, in part because of the increasing number of studies suggesting evolutionary changes in life‐history traits, and the potential ecological and economic consequences these changes may have. Among the traits that could evolve in response to fishing, growth has lately received attention. However, critical reading of the literature on growth evolution in fish reveals conceptual confusion about the nature of ‘growth’ itself as an evolving trait, and about the different ways fishing can affect growth and size‐at‐age of fish, both on ecological and on evolutionary time‐scales. It is important to separate the advantages of being big and the costs of growing to a large size, particularly when studying life‐history evolution. In this review, we explore the selection pressures on growth and the resultant evolution of growth from a mechanistic viewpoint. We define important concepts and outline the processes that must be accounted for before observed phenotypic changes can be ascribed to growth evolution. When listing traits that could be traded‐off with growth rate, we group the mechanisms into those affecting resource acquisition and those governing resource allocation. We summarize potential effects of fishing on traits related to growth and discuss methods for detecting evolution of growth. We also challenge the prevailing expectation that fishing‐induced evolution should always lead to slower growth.     

Statistical correlation of earthquake and ambient noise spectral ratios

The Horizontal-to-Vertical Spectral Ratio from earthquake (HVSR) and from ambient noise (HVN) recordings realistically indicate the fundamental frequency of soil response but, for the majority of the worldwide examined sites, they do not provide reliable amplification curves as calculated by the earthquake standard Spectral Ratio (SSR). Given the fact that HVSR and especially HVN can be easily obtained, it is challenging to search for a meaningful correlation with SSR amplification functions for the entire frequency band and to use the results for the SSR estimate at a further site where only noise measurements are available. To this aim we used recordings from 75 sites worldwide and we applied a multivariate statistical approach (canonical correlation analysis) to investigate and quantify any correlation among spectral ratios. The canonical correlation between SSR and HVN is then used to estimate the expected SSR at each site by a weighted average of the SSR values measured at the other sites; the weights are properly set to account more for sites with similar behaviour in terms of the canonical correlation results between HVN and SSR. This procedure, repeated for all sites in turn, constitutes the basis of a cross validation. The comparison between the inferred and the original SSR highlights the improvements of site response estimation with respect to the use of ambient noise techniques. The goodness and limitations of the reconstruction procedure are explained by specific geological settings.     

Saghro Group in the Ougnat Massif (Morocco), an evidence for a continuous Cadomian basin along the northern West African Craton

The Saghro Group (SG) is a folded, low-grade volcano-sedimentary series up to 8 km thick that crops out within and to the north of the Pan-African suture zone in the central and eastern Anti-Atlas. Here we describe the SG of the Ougnat inliers that are exposed in the easternmost Anti-Atlas beneath the unconformable, Late Ediacaran Ouarzazate Group (OZG) volcanic rocks. The Ougnat SG mostly consists of volcaniclastic greywackes accumulated in a peritidal-to-shallow basin. The basin infilling was deformed by NNE-trending, mostly upright folds with axial-planar slaty cleavage and low-grade metamorphism. The deformed SG rocks were intruded by the ～550 Ma Mellab hypovolcanic granodiorite. The latter also crosscuts the lowest OZG rocks that are dated to 574–571 Ma in the western Saghro region. The SG rocks that form the Siroua and Saghro inliers have an oldest age of 620–610 Ma and were folded at ～610–580 Ma at the onset of the Cadomian orogenic events. We show that the SG rocks are similar to the “Série verte” (SV) rocks that are exposed in the Ougarta and western Hoggar east of the Pan-African suture. We infer that the SG and SV rocks accumulated in a same, continuous basin that was bounding the West African Craton to the north and the east. This strongly subsiding basin formed close to a volcanic arc and was folded during the last Pan-African synmetamorphic events. Fold orientation and age of folding differ however along the edge of the West African Craton. The orogenic greywackes that form the remnants of the SG-SV basin thus constitute a precious record of the diachronic Cadomian event s.l. along the West African Craton northern margin.     

Cambrian–early Ordovician volcanism across the South Armorican and Occitan domains of the Variscan Belt in France: Continental break-up and rifting of the northern Gondwana margin

The Cambrian–lower Ordovician volcanic units of the South Armorican and Occitan domains are analysed in a tectonostratigraphic survey of the French Variscan Belt. The South Armorican lavas consist of continental tholeiites in middle Cambrian–Furongian sequences related to continental break-up. A significant volcanic activity occurred in the Tremadocian, dominated by crustal melted rhyolitic lavas and initial rifting tholeiites. The Occitan lavas are distributed into five volcanic phases: (1) basal Cambrian rhyolites, (2) upper lower Cambrian Mg-rich tholeiites close to N-MORBs but crustal contaminated, (3) upper lower–middle Cambrian continental tholeiites, (4) Tremadocian rhyolites, and (5) upper lower Ordovician initial rift tholeiites. A rifting event linked to asthenosphere upwelling took place in the late early Cambrian but did not evolve. It renewed in the Tremadocian with abundant crustal melting due to underplating of mixed asthenospheric and lithospheric magmas. This main tectono-magmatic continental rift is termed the “Tremadocian Tectonic Belt” underlined by a chain of rhyolitic volcanoes from Occitan and South Armorican domains to Central Iberia. It evolved with the setting of syn-rift coarse siliciclastic deposits overlain by post-rift deep water shales in a suite of sedimentary basins that forecasted the South Armorican–Medio-European Ocean as a part of the Palaeotethys Ocean.     

Hydrodynamics of suspended particulate matter in the tidal freshwater zone of a macrotidal estuary (the Seine Estuary, France)

The effects of fortnightly, semidiurnal, and quaterdiurnal lunar tidal cycles on suspended particle concentrations in the tidal freshwater zone of the Seine macrotidal estuary were studied during periods of medium to low freshwater flow. Long-term records of turbidity show semidiurnal and spring-neap erosion-sedimentation cycles. During spring tide, the rise in low tide levels in the upper estuary leads to storage of water in the upper estuary. This increases residence time of water and suspended particulate matter (SPM). During spring tide periods, significant tidal pumping, measured by flux calculations, prevents SPM transit to the middle estuary which is characterized by the turbidity maximum zone. On a long-term basis, this tidal pumping allows marine particles to move upstream for several tens of kilometers into the upper estuary. At the end of the spring tide period, when the concentrations of suspended particulate matter are at their peak values and the low-tide level drops, the transport of suspended particulate matter to the middle estuary reaches its highest point. This period of maximum turbidity is of short duration because a significant amount of the SPM settles during neap tide. The particles, which settle under these conditions, are trapped in the upper estuary and cannot be moved to the zone of maximum turbidity until the next spring tide. From the upper estuary to the zone of maximum turbidity, particulate transport is generated by pulses at the start of the spring-neap tide transition period.     

Impact of coherent eddies on airborne measurements of vertical turbulent fluxes

During the Hydrological-Atmospheric Pilot Experiment (HAPEX)-Sahel, which took place in Niger in the transitional period between the wet and dry seasons, two French aircraft probed the Sahelian boundary layer to measure sensible and latent heat fluxes. The measurements over the Niamey area often revealed organised structures of a few km scale that were associated with both thermals and dry intrusions. We study the impact of these coherent structures using a single day’s aircraft-measured fluxes and a numerical simulation of that day with a mesoscale model. The numerical simulation at high horizontal resolution (250 m) contains structures that evolve from streaks in the early morning to cells by noon. This simulation shows distribution, variance and skewness similar to the observations. In particular, the numerical simulation shows dry intrusions that can penetrate deeply into the atmospheric boundary layer (ABL), and even reach the surface in some cases, which is in accordance with the observed highly negatively skewed water vapour fluctuations. Dry intrusions and thermals organised at a few km scale give skewed flux statistics and can introduce large errors in measured fluxes. We use the numerical simulation to: (i) evaluate the contribution of the organised structures to the total flux, and (ii) estimate the impact of the organised structures on the systematic and random errors resulting from the 1D sampling of the aircraft as opposed to the 2D numerical simulation estimate. We find a significant contribution by the organised structures to the total resolved fluxes. When rolls occur, and for a leg length of about 30 times the ABL depth, the 1D sampled flux is shown to be sometimes 20% lower than the corresponding 2D flux when the 1D sampling direction is the same as the main axis of the rolls, whereas the systematic error is much lower when the direction of the leg is transverse to the rolls. In the case of cells, an underestimate of around 10% can still be observed with the 1D approach independent of direction, due to poor sampling of the energy-containing scales.     

Adaptation of the optimal fingerprint method for climate change detection using a well-conditioned covariance matrix estimate

The “optimal fingerprint” method, usually used for detection and attribution studies, requires to know, or, in practice, to estimate the covariance matrix of the internal climate variability. In this work, a new adaptation of the “optimal fingerprints” method is presented. The main goal is to allow the use of a covariance matrix estimate based on an observation dataset in which the number of years used for covariance estimation is close to the number of observed time series. Our adaptation is based on the use of a regularized estimate of the covariance matrix, that is well-conditioned, and asymptotically more precise, in the sense of the mean square error. This method is shown to be more powerful than the basic “guess pattern fingerprint”, and than the classical use of a pseudo-inverted truncation of the empirical covariance matrix. The construction of the detection test is achieved by using a bootstrap technique particularly well-suited to estimate the internal climate variability in real world observations. In order to validate the efficiency of the detection algorithm with climate data, the methodology presented here is first applied with pseudo-observations derived from transient regional climate change scenarios covering the 1960–2099 period. It is then used to perform a formal detection study of climate change over France, analyzing homogenized observed temperature series from 1900 to 2006. In this case, the estimation of the covariance matrix is only based on a part of the observation dataset. This new approach allows the confirmation and extension of previous results regarding the detection of an anthropogenic climate change signal over the country.     

Fragmentation Energy in Rock Blasting

The theoretical explosive energy used in blasting is a common issue in many recent research works (Spathis 1999; Sanchidrian 2003). It is currently admitted that the theoretical available energy of the explosives is split into several parts during a blast: seismic, kinetic, backbreaks, heave, heat and fragmentation energies. Concerning this last one, the energy devoted to the breakage and to the creation of blocks within the muckpile can be separated from the microcracking energy which is devoted to developing new and/or extending existing micro cracks within the blocks (Hamdi et al. 2001; López et al. 2002). In order to investigate these two types of energy, a first and important task is to precisely study the main parameters characterising the two constitutive elements of the rock mass (rock matrix and discontinuity system). This should provide useful guidelines for the choice of the blasting parameters (type of explosive, blasting pattern, etc.), in order to finally control the comminution process. Within the frame of the EU LESS FINES research project, devoted to the control of fines production, the methodology was developed in order to: (1) characterize the in situ rock mass, by evaluating the density, anisotropy, interconnectivity and fractal dimension of the discontinuity system and (2) evaluate fragmentation (both micro and macro) energy spent during the blasting operation. The methodology was applied to three production blasts performed in the Klinthagen quarry (Sweden) allowing to estimate the part of the fragmentation energy devoted to the formation of muck pile blocks on one side and to the muckpile blocks microcracking on the other side.