Centrifuge Modeling of Rock Slopes Susceptible to Block Toppling

Summary This paper presents the results of centrifuge tests that were aimed at validating the Goodman-Bray method for rock slope toppling analysis. The Goodman-Bray method was extended by the authors to accommodate non-persistent basal planes of rock columns. Two gypsum column models, with and without anchors were used to represent the failure modes. Measured critical centrifuge accelerations were in agreement with the results obtained from numerical modeling. A background of the toppling slope failures associated with a large hydropower project in China instigated the need for the centrifuge study. The centrifuge model tests used an artificial rock. The observed failure mode did not follow a straight failure plane as proposed by Goodman and Bray. The failures revealed a bi-planar slip surface with a deep-seated portion near the toe of the slope. The outcomes of the centrifuge tests illustrated the need to search for the critical failure surface when performing a toppling analysis. The search technique is similar to that usually performed in a conventional sliding analysis.     

Feedbacks between erosion and sediment transport in experimental bedrock channels

Natural bedrock rivers flow in self‐formed channels and form diverse erosional morphologies. The parameters that collectively define channel morphology (e.g. width, slope, bed roughness, bedrock exposure, sediment size distribution) all influence river incision rates and dynamically adjust in poorly understood ways to imposed fluid and sediment fluxes. To explore the mechanics of river incision, we conducted laboratory experiments in which the complexities of natural bedrock channels were reduced to a homogenous brittle substrate (sand and cement), a single sediment size primarily transported as bedload, a single erosion mechanism (abrasion) and sediment‐starved transport conditions. We find that patterns of erosion both create and are sensitive functions of the evolving bed topography because of feedbacks between the turbulent flow field, sediment transport and bottom roughness. Abrasion only occurs where sediment impacts the bed, and so positive feedback occurs between the sediment preferentially drawn to topographic lows by gravity and the further erosion of these lows. However, the spatial focusing of erosion results in tortuous flow paths and erosional forms (inner channels, scoops, potholes), which dissipate flow energy. This energy dissipation is a negative feedback that reduces sediment transport capacity, inhibiting further incision and ultimately leading to channel morphologies adjusted to just transport the imposed sediment load. Copyright © 2007 John Wiley & Sons, Ltd.     

Maximum-likelihood ambiguity resolution based on Bayesian principle

 Based on the Bayesian principle and the fact that GPS carrier-phase ambiguities are integers, the posterior distribution of the ambiguities and the position parameters is derived. This is then used to derive the maximum posterior likelihood solution of the ambiguities. The accuracy of the integer ambiguity solution and the position parameters is also studied according to the posterior distribution. It is found that the accuracy of the integer solution depends not only on the variance of the corresponding float ambiguity solution but also on its values. Received: 27 July 1999 / Accepted: 22 November 2000     

Condensation heating of the Asian summer monsoon and the subtropical anticyclone in the Eastern Hemisphere

The effects of condensation heating on the formation of the subtropical anticyclone in the Eastern Hemisphere (EH) are studied by means of theoretical analysis and numerical simulation. The complete vorticity equation is employed for the analysis. It is found that, due to the vertical gradient of strong condensation heating, the distribution of cyclone and anticyclone in the upper troposphere is out of phase with that in the middle and lower troposphere. This is confirmed by a series of numerical experiments. The horizontal gradient of the condensation heating also affects the configuration of the subtropical anticyclone. It is concluded that condensation heating is a key factor for the formation and location of the summer subtropical anticyclone in the EH. The latent heating released by the Asian monsoon rainfall contributes to the formation of the 200 hPa South Asian anticyclone on the western side of the heating center and the 500 hPa western Pacific subtropical anticyclone on the eastern side of the center. Such configurations are modified to some extent by surface sensible heating and orography. The circulation in mid-latitudes is also affected by the latent heating in the subtropical area through the propagation of Rossby waves. Received: 10 September 1999 / Accepted: 5 June 2000     

GPS定位技术在高层建筑施工基准传递中的应用

在高层建筑施工中，基准传递是一项极为重要的测量工作，为了满足现代建筑工程快速、高效、优质的施工需要，文中提出应用GPS定位技术实施施工基准定位的方法，并结合工程实测就作业过程作了阐述。结果表明，在超高层建筑的基准传递中，应用GPS是一种行之有效的新方法。     

Preliminary Map of Soil's Predominant Periods in Barcelona Using Microtremors

—?In order to evaluate soil effects in the urban area of Barcelona, the Nakamura's technique has been used to estimate the predominant periods of soils. Noise measurements for 195 sites were performed using a strong motion accelerograph and a velocimeter. In this work, the resulting preliminary map of predominant periods is presented. The obtained predominant periods are coherent with the geological and geotechnical features of the area. The analysis of the information has allowed the distinctions among several types of soil and underlying materials. A predominant period of about 0.06?s is evaluated for sites located over outcrop Paleozoic rock in the Tibidabo-Collserola Mountains. For sites consisting of material named tricycle, that is the most extensive and also the most heterogeneous zone, predominant period range from 0.10?s up to 2.0?s depending on the thickness of the surface materials and the kind and thickness of the underlying materials. In the Besós river two zones are observed: the riverside with periods between 0.50?s and 0.83?s and a second area with periods between 1.0 and 2.1?s. In the Llobregat river delta the obtained periods are quite homogeneous with values around 0.72?s. Other predominant periods are found in some tertiary rock outcrop.     

Step-frequency radar applied on thin road layers

In the field of road construction and maintenance, the need for information on the thickness of very thin road layers is not satisfied by means of commercial pulse GPR, due to the inability of such devices to operate over ranges of several gigahertz. As a result, research has focused on the design of a step-frequency radar technique, able to work with very high-frequency synthetic pulses.An ultrawide band antenna, belonging to the family of Vivaldi antennas, has been developed for road applications. It has been created using stripline technology and yields a band width greater than one decade. During an initial step, this antenna was tested on various bituminous concrete samples with a network analyzer. Different parameters were studied, including band width, offset between antennas, and height and shape of the frequency-dependent pulse.A second step involved GPR dynamic measurements. A customized software program enabled recording data from the network analyzer. Several radar profiles were developed from selected road construction and maintenance test sites (e.g. the Circular Pavement Fatigue Test Track, composed of a number of known structures). Results show improved resolution when compared to a commercial impulse GPR system.     

Pounding of structures modelled as non‐linear impacts of two oscillators

A new formulation is proposed to model pounding between two adjacent structures, with natural periods T₁ and T₂ and damping ratios ζ₁ and ζ₂ under harmonic earthquake excitation, as non‐linear Hertzian impact between two single‐degree‐of‐freedom oscillators. For the case of rigid impacts, a special case of our analytical solution has been given by Davis (‘Pounding of buildings modelled by an impact oscillator’ Earthquake Engineering and Structural Dynamics, 1992; 21 :253–274) for an oscillator pounding on a stationary barrier. Our analytical predictions for rigid impacts agree qualitatively with our numerical simulations for non‐rigid impacts. When the difference in natural periods between the two oscillators increases, the impact velocity also increases drastically. The impact velocity spectrum is, however, relatively insensitive to the standoff distance. The maximum relative impact velocity of the coupled system can occur at an excitation period T_n^* which is either between those of the two oscillators or less than both of them, depending on the ratios T₁/T₂ and ζ₁/ζ₂. Although the pounding force between two oscillators has been primarily modelled by the Hertz contact law, parametric studies show that the maximum relative impact velocity is not very sensitive to changes in the contact parameters. Copyright © 2001 John Wiley & Sons, Ltd.     

Ice-sheet growth and high-latitudes sea-surface temperature

The response of the LLN 2-D climate model to the insolation and CO₂ forcings during the Eemian interglacial is compared to reconstructions obtained from deep-sea cores drilled in the Norwegian Sea and in the North Atlantic. Both reconstructions and modeling results show a decrease of sea-surface temperature (SST) in the higher latitudes (70–75 °N zonal belt for the model and the Norwegian Sea for the proxy records), associated with a more moderate cooling at lower latitudes (50–55 °N and North Atlantic), at the middle of isotopic substage 5e, several millenia before the beginning of continental ice-sheet growth. Such a comparison between the simulated SST and ice volume of the Northern Hemisphere has been extended to the whole last glacial-interglacial cycle. The influence of the insolation forcing on SST and the shortcomings of the model due to its zonal character are discussed. Received: 6 July 1995/Accepted: 19 December 1995