Stratigraphy and tectono-sedimentary evolution of the Upper Cretaceous–Tertiary sequence in the southern part of the Malatya Basin, East Anatolia, Turkey

The Malatya Basin is situated on the southern Taurus-Anatolian Platform. The southern part of the basin contains a sedimentary sequence which can be divided into four main units, each separated by an unconformity. From base to top, these are: (1) Permo-Carboniferous; (2) Upper Cretaceous–Lower Paleocene, (3) Middle-Upper Eocene and (4) Upper Miocene. The Upper Cretaceous–Tertiary sedimentary sequence resting on basement rocks is up to 700 m thick.The Permo-Carboniferous basement consist of dolomites and recrystallized limestones. The Upper Cretaceous–Lower Paleocene transgressive–regressive sequence shows a transition from terrestrial environments, via lagoonal to shallow-marine limestones to deep marine turbiditic sediments, followed upwards by shallow marine cherty limestones. The marine sediments contain planktic and benthic foraminifers indicating an upper Campanian, Maastrichtian and Danian age. The Middle-Upper Eocene is a transgressive–regressive sequence represented by terrestrial and lagoonal clastics, shallow-marine limestones and deep marine turbidites. The planktic and benthic foraminifers in the marine sediments indicate a Middle-Upper Eocene age. The upper Miocene sequence consists of a reddish-brown conglomerate–sandstone–mudstone alternation of alluvial and fluvial facies.During Late Cretaceous–Early Paleocene times, the Gündüzbey Group was deposited in the southern part of a fore-arc basin, simultaneously with volcanics belonging to the Yüksekova Group. During Middle-Late Eocene times, the Yeşilyurt Group was deposited in the northern part of the Maden Basin and the Helete volcanic arc. The Middle-Upper Eocene Malatya Basin was formed due to block faulting at the beginning of the Middle Eocene time. During the Late Paleocene–Early Eocene, and at the end of the Eocene, the study areas became continental due to the southward advance of nappe structures.The rock sequences in the southern part of the Malatya Basin may be divided into four tectonic units, from base to top: the lower allochthon, the upper allochthon, the parautochthon and autochthonous rock units.     

A Quantitative Method for Evaluating the Transporting Capacity of Oil‐Source Faults in Shallow Formation of Oil‐Rich Sags

正Objective Oil-source faults have an important effect on reservoir formation and distribution in shallow formations with nonhydrocarbon generation in oil-rich fault-related basins(Jiang Youlu et al.,2015).However,the fault transporting capacity cannot be evaluated quantitatively at present.Taking the Zhanhua Sag in the Bohai Bay Basin as an     

湿化膨胀与掺砂率对混合型缓冲材料THM耦合过程的影响分析

加入辅助骨料后的混合型缓冲材料在保留了材料密封和防渗能力的同时,克服了纯膨润土导热系数低、施工性差的缺点,作为高放废物处置库缓冲材料的备选材料正在成为新的研究热点。基于室内试验数据,以多孔介质非饱和渗流理论为基础,考虑了膨润土湿化膨胀及密度、饱和度、导热系数等材料物理性质参数的实时变化,利用COMSOL Multiphysics软件建立了包含一条巷道及单个井孔的3D网格模型,计算模拟了100 a间屏障系统中膨润土-石英砂混合型缓冲材料的THM多场耦合演化过程,分析了各物理量的时间演化及空间分布规律,并通过不同工况分析了材料湿化膨胀以及掺砂率对屏障系统演化过程的影响。系统中材料温度、饱和度与距固化体、岩壁的距离呈相关性,应力整体以受压为主,变形呈先压缩后膨胀的趋势。其中,膨润土基材料的湿化膨胀作用对温度演化的影响很小,但会略微加速饱和进程,并使材料的应力-应变出现明显的时间演化及区域分布差异。井孔和巷道中靠近岩壁区域的应力上升较快,并且在巷道底板与井孔交界处出现了显著的竖向位移。提高掺量可以有效降低罐体表面温度,增强屏障系统散热能力,降低缓冲材料的历史最大应力,有效控制井孔轴线上的竖向位移,但也会削弱系统的防渗能力。     

循环载荷下含水砂岩裂纹演化与损伤特征试验研究

基于矿井地下水库岩体频繁受到矿震、采动应力等循环荷载扰动这一工程背景,在实验室条件下开展了不同含水率砂岩单轴及循环加卸载试验,采用数字散斑技术,揭示了不同含水率砂岩裂纹扩展及破坏规律,基于电镜扫描微观分析,获得了循环载荷下不同含水砂岩微观劣化机制。试验结果表明：单轴及循环加卸载条件下,随着含水率增大,砂岩峰值强度均逐渐降低。干燥砂岩峰值轴向应变经历初始变形、等速变形、加速变形和失稳破坏4个阶段,含水砂岩经历初始变形、等速变形和失稳破坏3个阶段;随着含水率的增大,对应阶段内峰值轴向应变逐渐减小。通过变形率分析法验证发现,水对砂岩的变形记忆特性并无影响。单轴循环加卸载条件下,砂岩的破坏模式由干燥时的张拉−劈裂破坏逐渐向拉−剪混合破坏过渡,至饱和状态时呈现单一的剪切破坏。电镜扫描结果表明,随含水率增大,破裂结构面逐渐由光滑结构、浑圆状结构、片状结构向完全破碎结构过渡。随着含水率增大,绝对损伤参数不断增大,从侧面反映水岩耦合损伤的正相关性;累计损伤参数累积速率更快,同一循环周次下,累计损伤参数也更大。     

不同温度下抑食金球藻、中肋骨条藻和海洋卡盾藻间的相互作用

本文选取抑食金球藻(Aureococcus anophagefferens)、中肋骨条藻(Skeletonema costatum)和海洋卡盾藻(Chattonella marina)三种藻在20℃和25℃下进行单种、两种或三种藻间的培养实验, 探究在不同温度下藻种间的相互作用和竞争优势。单种培养结果显示抑食金球藻和中肋骨条藻对温度25℃敏感, 其环境容量(K)被显著降低; 而海洋卡盾藻的內禀增长率(r)在25℃下显著升高, 但K保持不变。在共培养中, 海洋卡盾藻在20℃下因抑食金球藻添加致死, 但在25℃处理下其K值上升120%。虽然中肋骨条藻的r在两个温度下均受海洋卡盾藻添加的促进, 但其K值从20℃下的上升43%转变为25℃下的降低48%。温度变化对于抑食金球藻和中肋骨条藻共培养的结果无明显影响, 中肋骨条藻的K均上升40%, 而抑食金球藻的K值均下降60%~70%。结果说明, 种间竞争除了共培养藻固有的相互作用关系因素外, 也受到微藻间温度适应性差异的影响。在20℃条件下三种藻混合, 抑食金球藻K的抑制率达到最高为79%, 而中肋骨条藻K的促进率达到最高为108%, 这可能表明三者之间的相互作用存在协同效应。     

A Comparison of IRI-2016 foF2 Predictions with the Observations at Different Latitudes During Geomagnetic Storms

Geomagnetism and Aeronomy - This study investigates the impacts of geomagnetic storms on the performance of the International Reference Ionosphere 2016 (IRI-2016) foF2 predictions at different...     

云南省西部地区土壤地球化学基准值特征及成因分析

基于云南省西部地区土地质量地球化学调查数据资料,采用具有稳健特性的中位数表征深层土壤52种元素的地球化学基准值,对比分析了不同成土母质和用地类型的元素分布特征和富集贫化规律,进一步采用因子分析从元素组合特征角度剖析了地球化学基准值的成因机制.结果 表明:研究区土壤中铁族元素、亲铜元素、矿化剂和卤族元素、稀有稀散稀土元素...     

侵蚀红壤区马尾松人工林恢复过程中凋落物碳氮归还量变化

以福建省长汀县侵蚀红壤区恢复0、16和34年马尾松人工林为研究对象,采用"时空代换"法,研究侵蚀退化地植被恢复过程中马尾松和林下植被芒萁凋落物年输入量以及碳、氮归还量的变化.通过对不同恢复年限样地为期4年的凋落物观测,结果表明:植被恢复过程中凋落物输入量逐渐增加,不同恢复年限样地马尾松凋落物年输入量平均分别为0.60、...     

GTDM:一种获取全球对流层延迟的新模型

对流层延迟是GNSS定位的主要误差源.现有的各对流层延迟模型大多存在过度拟合的弊端,不能反映延迟在短时间内的细节变化.本文利用2011—2017年ECMWF气象资料分析了对流层延迟的变化特征,发现同一格网相邻年份之间全球对流层延迟偏差绝大多数在5 cm内.在此基础上,本文提出了一种非参数拟合的对流层延迟模型GTDM.经...