Response of the night aurora to a negative sudden impulse

Data from the meridian scanning photometers of the NORSTAR network and all-sky cameras of the THEMIS network were used for a detailed study of the response of night auroras to the sharp decrease of the solar wind dynamic pressure on September 28, 2009. The decrease in dynamic pressure was accompanied by a corresponding depression of the magnetic field in the SYM-H index and the origin of a negative sudden impulse (SI) with a duration of 5–8 min and amplitude of 150–200 nT in the horizontal component of the magnetic field at stations of the night sector of the auroral zone. The magnetic impulse was preceded by a long calm magnetic period, although the IMF Bz-component was negative for ~1.5 hour before the SI ^–. The commencement of the SI ^–, which was determined by variations in the magnetic field at ~0650 UT, was accompanied by a sharp increase in the intensity of discrete forms of polar auroras in the midnight sector of the auroral zone and their fast propagation to the pole. Approximately 6–8 min after the SI ^–, the auroral intensity in the emissions, which were excited by the fluxes of precipitated electrons and protons, quickly began to decrease in the night sector. Analysis of the optical observations showed the two-stage character of the response of the night auroras to the SI ^– in the considered event: first, fast movement of the discrete aurora forms to the pole with a significant increase in their intensity, and a further fast decrease in auroral intensity with a delay of ~6–8 min relative to the SI ^–. The possible reasons for such aurora behavior are discussed.     

Thermomagnetic evidence of native iron in sediments

The paper summarizes the results of thermomagnetic analysis concerning the distribution of metallic iron in the sediments ranging in age from Miocene to Early Cretaceous sampled from the following sections: Gams (Austria); Verkhorech’e and Sel’bukhra (the Crimea); Kvirinaki and Tetritskaro (Georgia); Aimaki, Dzhengutai, Madzhalis, and Gergebil (Ciscaucasia, Russia); Klyuchi and Teplovka (Volga region, Russia); Koshak (Kazakhstan); and Khalats and Kara-Kala (Turkmenia). Small amounts of native iron (from 10⁻⁵% to 0.05%) are identified in 521 samples of 921 studied; i.e., iron particles are almost pervasive. This fact traces the origin of these particles to cosmic dust. Some established features point to the heterogeneous character of the cosmic dust: (a) the samples clearly fall into two groups. One group comprises the rocks that contain iron particles; the rocks of the other group are iron-free. In the first group, four intervals are distinguished where the sediments are globally enriched with iron with constant nickel content (5–6%); (b) in terms of composition, the iron particles are divided into three groups. The first group contains pure iron; the particles pertaining to the second group contain iron with a minor amount of nickel typical for kamacite; and the third group comprises the particles of Fe-Ni alloy with more than 20% nickel. The first and the second groups are ubiquitous; the particles of the third group are spread locally. They bear no relation to cosmic dust and are probably associated with the meteoritic impacts.     

Influence of afforestation on water regime in Jizera Catchments,Czech Republic

This paper studies the influence of afforestation on the water regime in two catchments in the Jizera Mountains that are similar in size and altitude but have different afforestation pattern. In this paper a range of different modelling tools is used to establish whether the differences in catchment water regime can be quantified and attributed to differences in catchment characteristics. Frequency analysis of low and high flows and a number and duration of flows over a threshold value are used to look for the differences in flow regime in both catchments. Low flow conditions are modelled using the Wittenberg nonlinear store approach. A rainfall-runoff process is modelled using a Data Based Mechanistic approach. The results indicate that the differences in the catchment response to external climatic factors outweigh the influence of land use apart from the low flows, where the changes in the response might be attributed to afforestation.     

Polycyclic aromatic hydrocarbons in sediments,mussels and crustacea around a former gasworks site in Shoreham-by-Sea,UK

Concentrations of polycyclic aromatic hydrocarbons have been determined in sediments, mussels and crustacea in the vicinity of a former gasworks site by Shoreham Harbour, UK. Very high concentrations of PAH were found in the substrate, an ash-like material deposited on the former gasworks site, which exhibited a profile consistent with the major source of contamination being coal or coke tar produced during the period of gas production at the site. Elevated PAH concentrations were also found in mussels both from the beach below the former gasworks site, and from sites further to the east in Portslade and Hove. The significance of these concentrations were assessed using an approach which involved the calculation of benzo[a]pyrene equivalent conoentrations (BaPEs), summing concentrations of individual PAH on the basis of their comparative potency as carcinogens. BaPE ranged from values of, or close to, zero for crustacea, to 336 microg kg(-1) wet weight in mussels from Southwick Beach. The contaminated mussels are not exploited commercially but may be taken by casual gatherers, and notices have been posted to warn potential consumers.     

Approximate analysis methods for asymmetric plan base‐isolated buildings

An approximate method for linear analysis of asymmetric‐plan, multistorey buildings is specialized for a single‐storey, base‐isolated structure. To find the mode shapes of the torsionally coupled system, the Rayleigh–Ritz procedure is applied using the torsionally uncoupled modes as Ritz vectors. This approach reduces to analysis of two single‐storey systems, each with vibration properties and eccentricities (labelled ‘effective eccentricities’) similar to corresponding properties of the isolation system or the fixed‐base structure. With certain assumptions, the vibration properties of the coupled system can be expressed explicitly in terms of these single‐storey system properties. Three different methods are developed: the first is a direct application of the Rayleigh–Ritz procedure; the second and third use simplifications for the effective eccentricities, assuming a relatively stiff superstructure. The accuracy of these proposed methods and the rigid structure method in determining responses are assessed for a range of system parameters including eccentricity and structure flexibility. For a subset of systems with equal isolation and structural eccentricities, two of the methods are exact and the third is sufficiently accurate; all three are preferred to the rigid structure method. For systems with zero isolation eccentricity, however, all approximate methods considered are inconsistent and should be applied with caution, only to systems with small structural eccentricities or stiff structures. Copyright © 2001 John Wiley & Sons, Ltd.     

Modeling of Stress Changes at Mayon Volcano,Philippines

In this paper, we analyze the stress change associated with the inverted volcanic source models at Mayon volcano, Philippines, where there are gravity changes without significant deformation after the 1993 eruption. We detail the applicable data and the associated inversion techniques and models prior to calculating the appropriate stress changes. It is determined that the stress change associated with the central magmatic source produces compressional stress changes at a secondary source to the northwest, prompting a change in the local water storage in the underlying fractured rock.     

Prediction of pile response to lateral spreading by 3-D soil–water coupled dynamic analysis: Shaking in the direction perpendicular to ground flow

The 1995 Kobe earthquake seriously damaged numerous buildings with pile foundations adjacent to quay walls. The seismic behavior of a pile group is affected by movement of quay walls, pile foundations, and liquefied backfill soil. For such cases, a three-dimensional (3-D) soil–water coupled dynamic analysis is a promising tool to predict overall behavior. We report predictions of large shake table test results to validate 3-D soil–water coupled dynamic analyses, and we discuss liquefaction-induced earth pressure on a pile group during the shaking in the direction perpendicular to ground flow. Numerical analyses predicted the peak displacement of footing and peak bending moment of the group pile. The earth pressure on the pile in the crustal layer is most important for the evaluation of the peak bending moment along the piles. In addition, the larger curvatures in the bending moment distribution along the piles at the water side in the liquefied ground were measured and predicted.     

The components and carbon isotope of the gases in inclusions in reservoir layers of Upper Paleozoic gas pools in the Ordos Basin,China

The components and carbon isotope of gases in inclusions are one of the most important geochemical indexes for gas pools. The analysis results of the components and carbon isotope of gases from inclusions in reservoir layers of Upper Palaeozoic gas pools in the Ordos Basin show that most inclusions grown in reservoir sandstone are primary inclusions. There is only a little difference about the components and carbon isotope between the well gases and the secondary inclusions gases. This indicated that the epigenetic change of gas pools is little. This difference between the well gases and the secondary inclusions gases is caused by two reasons: (i) The well gases come from several disconnected sand bodies buried in a segment of depth, while the inclusion gases come from a point of depth. (ii) The secondary inclusions trapped the gases generated in the former stage of source rock gas generation, and the well gases are the mixed gases generated in all the stages. It is irresponsible to reconstruct the palaeo-temperature and palaeo-pressure under which the gas pool formed using carbon dioxide inclusions.     

Filtering vibroseis data in the precorrelation domain

Vibroseis data recorded at short source–receiver offsets can be swamped by direct waves from the source. The signal-to-noise ratio, where primary reflections are the signal and correlation side lobes are the noise, decreases with time and late reflection events are overwhelmed. This leads to low seismic resolution on the vibroseis correlogram. A new precorrelation filtering approach is proposed to suppress correlation noise. It is the ‘squeeze-filter-unsqueeze’ (SFU) process, a combination of ‘squeeze’ and ‘unsqueeze’ (S and U) transformations, together with the application of either an optimum least-squares filter or a linear recursive notch filter. SFU processing provides excellent direct wave removal if the onset time of the direct wave is known precisely, but when the correlation recognition method used to search for the first arrival fails, the SFU filtering will also fail. If the tapers of the source sweeps are badly distorted, a harmonic distortion will be introduced into the SFU-filtered trace. SFU appears to be more suitable for low-noise vibroseis data, and more effective when we know the sweep tapers exactly. SFU requires uncorrelated data, and is thus cpu intensive, but since it is automatic, it is not labour intensive. With non-linear sweeps, there are two approaches to the S,U transformations in SFU. The first requires the non-linear analytical sweep formula, and the second is to search and pick the zero nodes on the recorded pilot trace and then carry out the S,U transformations directly without requiring the algorithm or formula by which the sweep was generated. The latter method is also valid for vibroseis data with a linear sweep. SFU may be applied to the removal of any undesired signal, as long as the exact onset time of the unwanted signal in the precorrelation domain is known or determinable.     

On ionospheric disturbances in relation to geomagnetic disturbances

Summary Disturbances in the critical frequency of theF2-region of the ionosphere at Watheroo on international magnetically disturbed days are analyzed together with simultaneous geomagnetic data at the same station. The results show that the daily average disturbanceDm (foF2) becomes negative or positive according as the maximum of the disturbance daily variationSD (foF2) takes place in night time or in daytime respectively. This fact may show that bothDm (foF2) andSD (foF2) are due to the condition that the daytime increase in the daily variation of theF2-region is reduced or enhanced owing to vertical drift of the ionosphere caused by electric currents responsible for geomagneticSD.