Geophysical surveys of the sediments of Loch Ness,Scotland: implications for the deglaciation of the Moray Firth Ice Stream,British–Irish Ice Sheet

We present results from three geophysical campaigns using high‐resolution sub‐bottom profiling to image sediments deposited in Loch Ness, Scotland. Sonar profiles show distinct packages of sediment, providing insight into the loch's deglacial history. A recessional moraine complex in the north of the loch indicates initial punctuated retreat. Subsequent retreat was rapid before stabilisation at Foyers Rise formed a large stillstand moraine. Here, the calving margin produced significant volumes of laminated sediments in a proglacial fjord‐like environment. Subsequent to this, ice retreated rapidly to the southern end of the loch, where it again deposited a sequence of proglacial laminated sediments. Sediment sequences were then disturbed by the deposition of a thick gravel layer and a large turbidite deposit as a result of a jökulhlaup from the Spean/Roy ice‐dammed lake. These sediments are overlain by a Holocene sheet drape. Data indicate: (i) a former tributary of the Moray Firth Ice Stream migrated back into Loch Ness as a major outlet glacier with a calving margin in a fjord‐like setting; (ii) there was significant sediment supply to the terminus of this outlet glacier in Loch Ness; and (iii) that jökulhlaups are important for sediment supply into proglacial fjord/lake environments and may compose >20% of proglacial sedimentary sequences. Copyright © 2011 John Wiley & Sons, Ltd.     

Process length variation of the cyst of the dinoflagellate Protoceratium reticulatum in the North Pacific and Baltic‐Skagerrak region: calibration as an annual density proxy and first evidence of pseudo‐cryptic speciation

Process length variation of cysts of the dinoflagellate Protoceratium reticulatum (Claparède et Lachmann) Bütschli in surface sediments from the North Pacific was investigated. The average process length showed a significant inverse relation to annual seawater density: σ_{t annual} = ?0.8674 × average process length + 1029.3 (R² = 0.84), with a standard error of 0.78 kg m^?3. A sediment trap study from Effingham Inlet in British Columbia revealed the same relationship between average process length and local seawater density variations. In the Baltic–Skagerrak region, the average process length variation was related significantly to annual seawater density: σ_{t annual} = 3.5457 × average process length ? 993.28 (R² = 0.86), with a standard error of 3.09 kg m^?3. These calibrations cannot be reconciled, which accentuates the regional character of the calibrations. This can be related to variations in molecular data (small subunit, long subunit and internal transcribed spacer sequences), which show the presence of several genotypes and the occurrence of pseudo‐cryptic speciation within this species. Copyright © 2012 John Wiley & Sons, Ltd.     

Sustaining trajectories towards Sustainability: Dynamics and diversity in UK communal growing activities

Civil society is a critical arena both for exploring Sustainability itself and for sustaining trajectories towards it through innovation, experimentation and debate. Innovations can be mould breaking and can challenge local institutions. Concurrently, initiatives may be fragile due to the development of new working relationships, reliance on voluntary labour and goodwill, and dependence on grant funding. Here we examine different aspects of what it takes to sustain grassroots trajectories for ‘communal growing’, given the pressures that groups and intermediary organisations practicing and supporting this activity experience, and the consequential need to build qualities like ‘resilience’. Attending carefully to the definition of this otherwise slippery concept, a particular focus is given to how contrasting aspects of temporality and agency lead to divergent constructions of ‘resilience’ and strategies for sustaining growing. We draw on fieldwork that explores the practice and support of communal growing in East Sussex, England, and directly associated activities at a national level.We find important interdependencies between communal growing projects and the intermediary organisations supporting them. Additionally there is huge diversity within and between both projects and the organisations that support them, including with respect to the ends to which growing is seen as a means. These ends link growing initiatives – both antagonistically and synergistically – to food, education and health systems. This diversity can be seen positively as: a source of innovation; facilitating the open and bottom up nature of growing; and, enabling the securing of greater financial support for the endeavour. What is less clear is how this plays into framing and configuring communal growing specifically in relation to achieving a more Sustainable and localised food system. We discuss the conceptual and methodological implications of these empirically derived observations with regards future research on grassroots innovations.     

Short-term environmental variability in cold-water coral habitat at Viosca Knoll,Gulf of Mexico

The Lophelia pertusa community at Viosca Knoll (VK826) is the most extensive found to date in the Gulf of Mexico. As part of a multi-disciplinary study, the physical setting of this area was described using benthic landers, CTD transects and remotely operated vehicle observations. The site was broadly characterised into three main habitats: (1) dense coral cover that resembles biogenic reef complexes, (2) areas of sediment, and (3) authigenic carbonate blocks with sparse coral and chemosynthetic communities. The coral communities were dominated by L. pertusa but also contained numerous solitary coral species. Over areas that contained L. pertusa, the environmental conditions recorded were similar to those associated with communities in the north-eastern Atlantic, with temperature (8.5–10.6 °C) and salinity (～35) falling within the known species niche for L. pertusa. However, dissolved oxygen concentrations (2.7–2.8 ml l^?1) and density (σ_Θ, 27.1–27.2 kg m^?3) were lower and mass fluxes from sediment trap data appeared much higher (4002–4192 mg m^?2 d^?1). Yet, this species still appears to thrive in this region, suggesting that L. pertusa may not be as limited by lower dissolved oxygen concentrations as previously thought. The VK826 site experienced sustained eastward water flow of 10–30 cm s^?1 over the 5-day measurement period but was also subjected to significant short-term variability in current velocity and direction. In addition, two processes were observed that caused variability in salinity and temperature; the first was consistent with internal waves that caused temperature variations of 0.8 °C over 5–11 h periods. The second was high-frequency variability (20–30 min periods) in temperature recorded only at the ALBEX site. A further pattern observed over the coral habitat was the presence of a 24 h diel vertical migration of zooplankton that may form part of a food chain that eventually reaches the corals. The majority of detailed studies concerning local environmental conditions in L. pertusa habitats have been conducted within the north-eastern Atlantic, limiting most knowledge of the niche of this species to a single part of an ocean basin. Data presented here show that the corals at VK826 are subjected to similar conditions in temperature, salinity, and flow velocity as their counterparts in the north-east Atlantic, although values for dissolved oxygen and density (sigma-theta: σ_Θ) are different. Our data also highlight novel observations of short-term environmental variability in cold-water coral habitat.     

The effect of composition,temperature and pressure on the stability of the 1Tc and 2M polytypes of sapphirine

Microprobe analyses and structural characterisation by means of transmission electron microscopy and powder X-ray diffraction are presented for a suite of natural and synthetic sapphirines. Most sapphirines appear to consist of intergrowths of the common 2M polytype with minor amounts of the 1Tc phase, although the converse situation is found in some cases. Attempts to correlate the structural state of the mineral with other factors reveal that: (i) There is no strong relationship between mean tetrahedral cation radius or mean octahedral cation radius and the preferred polytype. The Tschermak substitution M²⁺M⁴⁺-M³⁺M³⁺ does not appreciably influence the 1Tc-2M equilibrium, (ii) However, the total content and mean oxidation state of iron in sapphirine are important in this respect. Fe²⁺ stabilises the 2M phase, whereas Fe³⁺ stabilises the 1Tc phase. (iii) P-T estimates for the host rocks, and estimates for the conditions of sapphirine crystallisation, where obtainable, suggest that the 1Tc phase is stable at lower T and higher P than the 2M phase. Some quantitative constraints are inferred.     

Si,Al ordering in leucite by high-resolution 27Al MAS NMR spectroscopy

High-resolution ²⁷Al MAS NMR spectra of natural leucite recorded at H ₀=11.7T contain three resolvable resonances at ²⁷Al δ _i = 69.2, 64.7, and 61.0±0.5 ppm. These three resonances are assigned to the three inequivalent framework positions of leucite: T3, T2, and T1, respectively. Fitting the observed spectra yields a Si,Al distribution for leucite in which approximately one-half of the Al is in T1 and one-quarter in each of T2 and T3. This Si,Al distribution differs substantially from those obtained by previous workers using ²⁹Si NMR spectroscopy and X-ray diffraction. New ²⁹Si NMR spectra and revision of previously reported ²⁹Si NMR peak assignments, however, make the ²⁷Al and ²⁹Si NMR results consistent. The ²⁷Al δ _i correlate linearly with the mean T-O-T′ bond angles of the average structure, which allows the peak assignments to be made. However, this correlation lies distinctly toward higher frequency and larger bond angles than correlations for Si,Al ordered aluminosilicates, suggesting that the mean T(Al)-O-T′(Si) bond angle for each site in leucite is smaller than the mean bond angle of the average structure, which is averaged over T(Al)-O-T′(Si) and T(Si)-OT′(Si,Al) angles.     

A short-range interaction model for polytypism and planar defect placement in sapphirine

The concept of short-range interlayer interactions, fundamental to spin-analogue models for polytypism, is examined in the case of sapphirine. Consideration of interactions out to fourth-nearest neighbours provides a rationale for the difference between the polytype suites observed for sapphirine and wollastonite. In each case, the observed long-period structures are consistent with those predicted to be stable by the appropriate mappings onto the axial next-nearest neighbour model. Short-range interaction parameters may also be used to express stacking fault energies. This approach, combined with a simple nucleation-andgrowth model, is used to examine the possibility of metastable generation of complex polytypes in sapphirine. Statistical analysis of defect distributions and frequencies in sapphirine suggests that interactions over several hundred Ångstroms must be considered if the stacking energetics are to be accurately modelled.