Coherent structure dynamics and sediment particle motion around a cylindrical pier in developing scour holes

Recent investigations on the dynamics of the turbulent horseshoe vortex system (THV) around cylindrical piers have shown that the rich coherent dynamics of the vortical structures is dominated by low-frequency bimodal fluctuations of the velocity field. In spite of these advances, many questions remain regarding the changes of the flow and sediment transport dynamics as scour progresses. In this investigation we carry out laboratory experiments to register the development of the scour hole around a cylindrical pier in a fine-sand bed (d ₅₀ = 0.36 mm). We use the bathymetry measured in the experiment to simulate the flow field employing the detached-eddy simulation approach (DES), which has shown to resolve most of the turbulent stresses around surface-mounted obstacles. From these simulations we compare the dynamics of the THV to the flat-bed case, and analyze the effects on particle transport and sediment flux using the Lagrangian particle model of Escauriaza and Sotiropoulos (2011b) to study the impact of the changes of the flow on the sediment dynamics.     

Power-law velocity profile in turbulent boundary layers: An integral reynolds-number dependent solution

Geophysical flows of practical interest encompass turbulent boundary layer flows. The velocity profile in turbulent flows is generally described by a log- or a power-law applicable to certain zones of the boundary layer, or by wall-wake law for the entire zone of the boundary layer. In this study, a novel theory is proposed from which the power-law velocity profile is obtained for the turbulent boundary layer flow. The new power-law profile is based on the conservation of mass and the skin friction within the boundary layer. From the proposed theory, analytical expressions for the power-law velocity profile are presented, and their Reynolds-number dependency is highlighted. The velocity profile, skin friction coefficient and boundary layer thickness obtained from the proposed theory are validated by the reliable experimental data for zero-pressure gradient turbulent boundary layers. The expressions for Reynolds shear stress and eddy viscosity distributions across the boundary layer are also obtained and validated by the experimental data.     

Robust Regulation of Alkalinity in Highly Uncertain Continuous Anaerobic Digestion Processes

In this paper, a multiple‐input multiple‐output (MIMO) model‐based robust control scheme is proposed for the indirect control of both total alkalinity and the ratio (intermediate alkalinity)/(total alkalinity) by regulating volatile fatty acid concentrations and strong ions concentration, while guaranteeing the so‐called operational stability in anaerobic digestion (AD) processes. The proposed MIMO regulator is an adaptive controller derived from an AD model which incorporates the physicochemical equilibrium of the system as well as the use of a robust interval observer to estimate key process bounds that are used in the computation of the control efforts. Numerical simulations were carried out for a number of operating conditions under the most uncertain scenarios. Results showed that the proposed multivariable control law is able to recover the system stability around a pre‐determined set point in the face of parameter uncertainty and load disturbances.     

How do granitoid magmas mix with each other? Insights from textures,trace element and Sr–Nd isotopic composition of apatite and titanite from the Matok pluton (South Africa)

In plutonic systems, magma mixing is often modelled by mass balance based on whole-rock geochemistry. However, magma mixing is a chaotic process and chemical equilibration is controlled by non-linear diffusive–advective processes unresolved by the study of bulk samples. Here we present textural observations, LA-(MC-)ICP-MS trace element and Sr–Nd isotopic data of accessory apatites and titanites from a hybrid granodiorite of the Neoarchean Matok pluton (South Africa), collected in a zone of conspicuous mixing between mafic and felsic magmas. Apatite grains mostly show a pronounced zoning in CL images, corresponding to abrupt changes in REE and HFSE concentrations recording their transfer through compositionally different melt domains during mixing. These grains crystallized early, at temperatures of 950–1000 °C. Titanite grains crystallized at temperatures of 820–900 °C (Zr-in-sphene thermometry). They show limited intra-grain chemical variations but huge inter-grain compositional scatter in REE and HFSE, pinpointing crystallization within a crystal mush, from isolated melt pockets having different composition from one another owing to incomplete chemical homogenization and variable Rayleigh fractionation. These chemical–textural characteristics, in combination with partitioning models and Polytopic Vector Analysis, point to “self-mixing” between co-genetic dioritic and granodioritic/granitic magmas. Both resulted from differentiation of mantle-derived mafic melts, showing that mixing does not necessarily involve magmas from contrasted (crust vs. mantle) sources. Systematic variations in εNd _t (?4.5 to ?2.5) and ⁸⁷Sr/⁸⁶Sr_(i) (0.703–0.707) of titanite and apatite grains/domains crystallized from the two magmas point to an isotopically inhomogeneous mantle source, which is not resolved by bulk-rock isotopic data. Interaction between the two magmas must have occurred at relatively high temperatures (ca. 900°C) so that their viscosity contrast remained low, allowing efficient mechanical mixing. Despite this, chemical homogenization was incomplete, as recorded by diffusive fractionation between REE–HFSE and Sr. Modelling thereof reveals that chemical exchange between the liquid phases of the two mixed magmas did not last more than a few tens to hundreds of years. The chemical equilibration between mixed magmas thus strongly depends on the considered elements and observational length scales.     

Petrology of pumices of April 1993 eruption of Lascar (Atacama, Chile)

Lascar Volcano (Atacama, Chile) erupted on 18–20 April 1993. Several sub-Plinian explosions occurred, and some were mushroom-shaped. The highest column rose up to 23 km. Ash clouds crossed South America eastwards. Dacite pumice falls made of blocks and ashes were deposited on the flanks of the volcano as a result of collapsed columns. The pumice contains phenocrysts of plagioclase, enstatite, augite, biotite, magnetite and ilmenite and small crystals of apatite. The 1992 previous andesite dome inside the crater was destroyed. Banded blocks resulting from mingling of the dacitic pumice and andesite from the dome are found in the pumice flow. Both the lava dome and the pumice are representative of the Lascar high-K magma unit. Dacitic pumice is a product of crystal fractionation of the andesitic magma.     

Do galaxy mergers form elliptical galaxies? A comparison of kinematic and photometric properties

We present near-infrared K -band imaging and spectroscopy of a sample of galaxy mergers, which we use to derive light profile indices, absolute magnitudes and central velocity dispersions. We find that the light distributions of mergers more nearly resemble those of ellipticals than those of bulges, but that the mergers lie well away from the Fundamental Plane defined by the ellipticals. We interpret this as being due to enhancement of the K -band surface brightness of the mergers by a significant population of supergiant stars, and independent evidence for such a population is inferred from measurements of the depth of the 2.3-μm CO absorption feature.     

On the soil water characteristic curves of poorly graded granular materials in aqueous polymer solutions

Tempe cell with a self-developed horizontal hanging column attachment was used to measure the soil water characteristic curves (SWCCs) of granular materials initially saturated with either water or polymer solutions. For SWCCs of six poorly graded granular materials with d ₅₀ ranging from 0.04 to 0.7 mm in water, it was found that (1) as grain size decreases, air entry value increases, and matric suction (ψ) for the funicular and pendular regimes increases and that (2) steep desaturation curves over narrow ψ range in the funicular regime were observed. Air entry values obtained from the fitting parameter 1/α in van Genuchten SWCC equation fall in the boundaries calculated from the pore throat sizes in both simple cubic and face-centered cubic packings. A toroidal meniscus water model, which incorporates the measured surface tension and contact angle values between aqueous solutions and solid surfaces, was proposed for the SWCC in pendular regime and was compared to well-received numerical methods. This toroid model successfully depicts SWCC of poorly graded granular materials in water. However, SWCCs predicted by this toroid model underestimate the degree of saturation in the pendular regime for Ottawa 20–30 sands in polymer solutions. Herschel–Bulkley fluid, which is a type of non-Newtonian fluids, is postulated to increase the ψ needed to drain the polymer solution due to the nonzero shear stress intercept. In addition, it is also postulated by scanning electron microscopy and optical confocal imaging results that the rough surfaces of Ottawa 20–30 sand, which have many micron-sized “kinks”, together with the possible chemical attractions, help retain the polymer solutions on the solid surfaces, or water film.     

Paleoproductivity evolution off central Chile from the Last Glacial Maximum to the Early Holocene

A geochemical and paleontological reconstruction of paleoproductivity, upwelling intensity and sea surface temperature (SST) off central Chile at 35°S (GeoB3359-3) reveals marked changes from the Last Glacial Maximum (LGM) through the Early Holocene. Surface-water productivity was determined by the interaction between the atmospheric (the Southern Westerlies) and oceanographic (the Antarctic Circumpolar Current, ACC) systems from the LGM through early Termination I (TI). The northward shift of the climate zones during the LGM brought the ACC, as the main macronutrient source, closer to the GeoB3359-3, SST lowered, and surface water productivity and accumulation rates of biogenic components enhanced. With the poleward return of the Southern Westerlies and the ACC, the subtropical high-pressure system became the dominant atmospheric component southward till 35°S during the late TI and Early Holocene and caused surface water productivity to increase through enhanced upwelling.     

Partition of arsenic in soils sediments and the origin of naturally elevated concentrations in groundwater of the southern pampa region (Argentina)

Excessive arsenic concentrations above the Argentinean and WHO guidelines for drinking water (10 μg L⁻¹) affects shallow aquifers of the southern Pampean Plain (Argentina) hosted in the Pampean and the Post Pampean formations (loess and reworked loess; Plio-Pleistocene–Holocene). Health problems related to high As concentrations in drinking waters are known as Endemic Regional Chronic Hydroarsenicism. Hydrochemistry of shallow groundwaters and soil geochemistry were investigated aiming to (1) understand the partition of As in the solid phase and its relationship with unacceptable As concentrations in waters, (2) identify the provision source of As to groundwaters. Only 5% of the samples had As concentrations <10 μg L⁻¹; in 27% As concentrations ranged from 10 to 50 μg L⁻¹ and in 58% it reached 60–500 μg L⁻¹. The coarse fraction (50–2,000 μm) hosts about 27% of the total As in the solid phase, being positively correlated to Ba (p < 0.01; r ² = 0.93). About 70% is included in the <2 μm fraction and had positive correlations of As–Fe (p < 0.05; r ² = 0.85) and As–Cr (p < 0.05; r ² = 0.68). Soils and sediment sand fractions of vadose zones are the primary sources of As in shallow groundwater while adsorption–desorption processes, codisolution–coprecipitation, and evaporation during the dry seasons raise As concentrations in waters exceeding the guideline value for drinking water.