Geotechnical properties of submarine sediments in the Seto Inland Sea

Abstract

Sampling of submarine sediments by an improved piston corer and a bucket dredger has been carried out since 1973. The length of the core samples ranged from 0.9 m to 5.4 m. The recovery ratio ranged from 39.1 percent to 98.9 percent. The physical and engineering properties of 16 sediment cores and the physical properties of 125 dredged samples were determined, and variation of these properties was analyzed.

Clayey silts and silty clays cover the floor of relatively wide bays and sea areas. Sands and sandy silts blanket the floor of channels that have swift currents, and are also found in the vicinity of estuaries.

The piston core samples showed considerable sample disturbance, which should be estimated quantitatively in the future.     

Quantification of the effect of forest harvesting versus climate on streamflow cycles and trends in an evergreen broadleaf catchment

ABSTRACT

A new method known as Unobserved Components–Dynamic Harmonic Regression (UC-DHR) was applied to a 39-year record of rainfall and streamflow for three sub-catchments of the Sarukawa Experimental Watershed in southwestern Japan. Some 25% of the timber was harvested from one of the sub-catchments in May–July 1982 and the objective was to quantify the magnitude of this effect relative to the effects of climate cycles (e.g. Southern Oscillation Index). The observed effects of inter-annual climate cycles (i.e. 0.89–1.36 mm/d) were seen to be comparable (i.e. 0.70–1.17 mm/d) to the effects of harvesting 25% of the standing timber. This result underlines the importance of always quantifying the effect of climate on streamflow response when harvesting impacts are studied.

Editor D. Koutsoyiannis; Associate editor T. Okruszko     

Gas hydrate saturation at Site C0002, IODP Expeditions 314 and 315, in the Kumano Basin,Nankai trough

The degree of gas hydrate saturation at Integrated Ocean Drilling Program (IODP) Site C0002 in the Kumano Basin, Nankai Trough, was estimated from logging‐while‐drilling logs and core samples obtained during IODP Expeditions 314 and 315. Sediment porosity data necessary for the calculation of saturation were obtained from both core samples and density logs. Two forms of the Archie equation (‘quick‐look’ and ‘standard’) were used to calculate gas hydrate saturation from two types of electrical resistivity log data (ring resistivity and bit resistivity), and a three‐phase Biot‐type equation was used to calculate gas hydrate saturation from P‐wave velocity log data. The gas hydrate saturation baseline calculated from both resistivity logs ranges from 0% to 35%, and that calculated from the P‐wave velocity log ranges from 0% to 30%. High levels of gas hydrate saturation (>60%) are present as spikes in the ring resistivity log and correspond to the presence of gas hydrate concentrations within sandy layers. At several depths, saturation values obtained from P‐wave velocity data are lower than those obtained from bit resistivity data; this discrepancy is related to the presence of free gas at these depths. Previous research has suggested that gas from deep levels in the Kumano Basin has migrated up‐dip towards the southern and seaward edge of the basin near Site C0002. The high saturation values and presence of free gas at site C0002 suggest that a large gas flux is flowing to the southern and seaward edge of the basin from a deeper and/or more landward part of the Kumano Basin, with the southern edge of the Kumano Basin (the location of site C0002) being the main area of fluid accumulation.     

Measurements of Rare Earth Element and Other Element Mass Fractions in Environmental Reference Materials (NIST SRM 1646a,NIST SRM 1400, IAEA‐395 and IAEA‐450) by INAA,ICP‐AES and ICP‐MS

INAA, ICP‐AES and ICP‐MS were used to elementally characterise four environmental reference materials – NIST SRM 1646a (Estuarine Sediment), NIST SRM 1400 (Bone Ash), IAEA‐395 (Urban Dust) and IAEA‐450 (Algae). An analytical scheme consisting of the three methods was first applied to NIST SRM 1646a to validate the methodology because it has been extensively analysed and has certified values for many elements. With repeated analyses of NIST SRM 1646a, the accuracy and measurement repeatability of the data obtained were evaluated based on two statistical calculations (zeta‐score and Horwitz ratio) and were observed to be good enough for the analytical scheme to be applied to similar sorts of environmental/geochemical samples. Applying the same approach to NIST SRM 1400, IAEA‐395 and IAEA‐450, enabled mass fractions of 29, 38 and 28 elements to be determined, respectively. Among these results, the data for rare earth elements are of particular interest, not only for IAEA‐450 but also for the other three reference samples. The data for Pr, Gd, Dy, Ho, Er and Tm in NIST SRM 1646a are newly reported in this study. By using small test portions (< 100 mg) for NIST SRM 1646a and IAEA‐395, and recommended minimum amounts for NIST SRM 1400 and IAEA‐450, sample homogeneity was evaluated.     

High-resolution terrestrial carbon isotope and planktic foraminiferal records of the Upper Cenomanian to the Lower Campanian in the Northwest Pacific

Making Upper Cretaceous biostratigraphic correlations between the Northwest Pacific and Tethyan–Atlantic sections have been difficult because of rare frequencies of age-diagnostic macro- and microfossils in the sequences in the Northwest Pacific region. In order to correlate these sections precisely, an integrated planktic foraminiferal and bulk wood carbon-isotope stratigraphy from the upper Cenomanian to the lower Campanian succession (the middle–upper part of the Yezo Group) of Hokkaido, northern Japan is established with an average resolution of 50 k.y. The δ¹³C curves from bulk wood of the Yezo Group and from bulk carbonate of English Chalk show remarkably similar patterns of isotopic fluctuation, allowing the correlation of 22 carbon isotopic events between these sections. This high-resolution correlation greatly improves the previous micro- and macrofossil biostratigraphic schemes in the Northwest Pacific region, and reveals that global events, such as the oxygen depletion at the OAE 2 horizon, the constant decrease in pCO₂ during the Late Cretaceous, and the eustatic sea-level falls in the late middle Turonian, Santonian/Campanian Boundary and early Campanian, are recorded in the Upper Cretaceous sequence of the Northwest Pacific.     

How do hydrologic modeling decisions affect the portrayal of climate change impacts?

End users face a range of subjective decisions when evaluating climate change impacts on hydrology, but the importance of these decisions is rarely assessed. In this paper, we evaluate the implications of hydrologic modelling choices on projected changes in the annual water balance, monthly simulated processes, and signature measures (i.e. metrics that quantify characteristics of the hydrologic catchment response) under a future climate scenario. To this end, we compare hydrologic changes computed with four different model structures – whose parameters have been obtained using a common calibration strategy – with hydrologic changes computed with a single model structure and parameter sets from multiple options for different calibration decisions (objective function, local optima, and calibration forcing dataset). Results show that both model structure selection and the parameter estimation strategy affect the direction and magnitude of projected changes in the annual water balance, and that the relative effects of these decisions are basin dependent. The analysis of monthly changes illustrates that parameter estimation strategies can provide similar or larger uncertainties in simulations of some hydrologic processes when compared with uncertainties coming from model choice. We found that the relative effects of modelling decisions on projected changes in catchment behaviour depend on the signature measure analysed. Furthermore, parameter sets with similar performance, but located in different regions of the parameter space, provide very different projections for future catchment behaviour. More generally, the results obtained in this study prompt the need to incorporate parametric uncertainty in multi‐model frameworks to avoid an over‐confident portrayal of climate change impacts. Copyright © 2015 John Wiley & Sons, Ltd.     

Secular perturbations of fictitious satellites of uranus

Secular perturbations of fictitious satellites that are initially circular and in the equatorial plane of Uranus are discussed. Satellites located in the region where the solar perturbation is dominant become highly eccentric and inclined with respect to the equator, and have a possibility to collide with Uranus. Satellites located in the region where the oblateness perturbation is dominant keep the original eccentricity and the inclination. A scenario of a possible extinction of outer satellites of Uranus is also discussed.     

Effects On the Nutation of the Non-Zonal Harmonics of Third Degree

In this paper, we calculate the coefficients of the nutation for a rigid Earth model due to the C _3m and S _3m (m ≠ 0) harmonics of the geopotential, starting from the Hamiltonian theory as developped by Kinoshita (1977). We show that these coefficients are far from being negligible as given the level of truncation of 0.1 μas which is necessary in the reconstruction of the tables of nutation, and also that their value is very close to that given by Bretagnon et al. (1997). This revised version was published online in July 2006 with corrections to the Cover Date.