黄条鰤贮藏挥发性化合物的研究

用气相色谱仪和气—质联机等方法对黄条鱼师的腐败挥发性化合物进行了定性和定量分析。这将有利于对黄条做一步的生化性质分析和制定其鲜品的国家标准。样品在２５℃贮藏５ｄ期间，测定了某些化学指标。结果表明在贮藏１ｄ后，鱼肉变腐臭，挥发性碱基化合物三甲胺和二甲基在贮藏中增加。在５ｄ的贮藏期间发现的挥发性有机酸包括乙酸、丙酸、丁酸、异丁酸、戊酸、异成酸，并且它们的含量不断增加，检测出脂肪氧化产物和含硫化合物，正己醛、３—辛酮、３，５—丰二烯—２—酮，２—壬酮辛烯—３—醇，二甲基三硫化物、１Ｈ—吲哚等都是黄条腐败时产生的重要挥发性化合物。应指出的是，２—甲基丁醇、庚醇、苯酚、辛烯—３—醇己醛是黄条中所特有的化合物，其余化合物与其它鱼类的挥发性化合物几乎相近。     

The impact of several chemical poisons on the absorbing 45Ca by the Arca granosa

The impact of several chemical poisons on the Arca granosa absorbing 45Ca was studied. The results showed that the absorption of 45Ca in the blood and the soft tissue by Arca granosa was inhibited by the inorganic compounds of Cu, Zn, Pd, Cd, Hg and so on, among which the inhibition of Cd was the strongest, next was that of Cu and Hg. But the inhibition of the absorption of 45Ca in the shell of Arca granosa was little. The impact of three kinds of energy metabolism inhibitory substances on the absorption of 45Ca by the Area granosa showed that the absorption was an active transfer process.     

Whether human-induced activities could change the gradient pattern of coastal land use along the sea-land direction: a case study in Manila Bay,Philippines

Increasing intense human activities have largely changed the coastal landscape and caused many environmental issues. However, whether human-induced activities could change the coastal land use gradient pattern, an important coastal zonal characteristic along the sea–land direction, remains unclear. Manila Bay was selected as the study area in this work. According to the distance of the land use and land cover(LULC) to the coastline, we clustered the typical coastal land use sequence patterns(CLU...     

Sedimentary characteristics and genetic mechanism of the giant ancient pockmarks in the Qiongdongnan Basin,northern South China Sea

In the late Miocene, giant ancient pockmarks, which are fairly rare globally, developed in the Qiongdongnan Basin. In this paper, to determine the sedimentary characteristics and genetic mechanism of these giant ancient pockmarks in the Yinggehai Formation of the Qiongdongnan Basin, based on high-resolution 3D seismic data and multiattribute fusion technologies, we analyzed the planar distribution and seismic facies of the ancient pockmarks and compared the characteristics of the ancient pockmar...     

Impacts of confining pressure and safety thickness on water and mud inrush in weathered granite

Abstract

Due to the strong disintegration and water erosion of completely weathered granite, water and mud inrush disasters are apt to take place in this zone during underwater tunnel construction. The pore, compactness, seepage path length, fracture geometries and their interconnections for water and mud transfer are strongly influenced by confining pressure and waterproof-resistant slab safety thickness. In order to inspect the influence, a series of experiments based on a self-designed testing system and non-Darcy testing method were performed. The results indicated that the water and mud inrush evolution increased with the increase of confining pressure and decreased with the increase of safety thickness. In particular, the confining pressure mainly influences the initial evolution stage, and a critical safety thickness to prevent water and mud inrush is obtained. Besides, the non-Darcy testing method results shows that the water and mud inrush evolution affects the influence of non-Darcy flow. For example, while the safety thickness was smaller than the critical value, the evolution was large and unstable and its behavior transferred into nonlinear. In this case, the flow changed to non-Darcy flow.     

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.     

迎风有限元法在三维潮流数值模拟中的应用

为研究和开发迎风有限元法在河口海岸三维波数值模拟中的应用，并为建立三维物质扩散模型，最终为解决实际工程问题打下基础，以非线性浅水波方程为基础，采用一咱平面迎风有奶元与垂向工有限差分相结合地数值计算方法建立三维潮流数学模型，基地实际的物理过程，在计算中将三维流动分成外重力波和内重力波，耦联求解潮位和流速的空间分布。应用本模式计算了天津新港附近渤海海域的三维潮流运动，以较高的分辩率揭示了潮流空间结构特     

中国东南沿海老红砂研究综述

老红砂是中国东南沿海独具特色的第四纪沉积物。本文回顾了老红砂的研究历史，综述了所取得的关于老红砂的成因，年代和红化作用等主要研究成果及其存在问题，并提出了今后进一步工作的意义。     

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.     

养殖对虾与海捕对虾鉴别方法初探

通过对养殖中国对虾(Penaeus orientalis)和海捕中国对虾肌肉煮熟后的失水率,提取物中的甜菜碱和氧化三甲胺含量,以及虾肉脂质中所含脂肪酸组成和含量进行了分析比较,得到下列结果:(1)两类对虾鲜样煮熟后失水率相差6％以上;(2)海捕对虾肌肉中的甜菜碱和氧化三甲胺含量比养殖对虾的高,两者有显著差别;(3)养殖对虾肌肉所含C18:2ω6为17.3±1.5％,海捕对虾为2.0±0.8％。从以上结果本文推荐以脂肪酸C18:2ω6含量来鉴别养殖对虾与海捕对虾。