Mary Anning,Alfred Nicholson Leeds and Steve Etches. Comparing the three most important UK ‘amateur’ fossil collectors and their collections

Mary Anning, Alfred Nicholson Leeds and Steve Etches form part of a long line of individuals who furnished a substantial addition to our understanding of marine and terrestrial ecosystems through collecting significant numbers of superb fossils. For all three collectors, fossils became a factor that dominated their lives, and their fossil collecting led to the discovery of numerous taxa new to science. Extensive collecting was made possible by the fortunate circumstances of living ‘in the right place at the right time’, close to fine-grained UK Jurassic deposits (Lagerstätten) with well-preserved large Jurassic marine reptiles. All three were highly-motivated and developed a considerable skill sets for discovering, collecting, preparing, conserving and displaying fossils. They developed personal and professional interactions with family and friends, and university and museum professionals, although their collecting resulted in variable recognition of their work. Each collector can be considered a complex mix of amateur and professional: Mary Anning, a professional fossil collector and amateur palaeontologist; Alfred Leeds transitioned from amateur to professional fossil collector, but remained an amateur palaeontologist; and Steve Etches has remained an amateur fossil collector and palaeontologist. However, all three exhibited an entirely professional outlook to collecting, and should be considered professionals of the highest degree. The impact of Mary Anning, Alfred Nicholson Leeds and Steve Etches has been critical for the development of Palaeontology as a science, and without whom palaeontology, with all its associated benefits to a wide scientific and non-scientific audience, would not be as rich as we currently know it.     

Structure of the 5-minute solar oscillations 1976–1980

The discrete structure in the 5 min velocity oscillations of the solar surface has been confirmed by a re-analysis of data obtained between 1976 and 1979, and in addition a preliminary analysis of 1980 data show excellent consistency of the determined frequencies over the five year period. It is further shown that atmospheric transparency, as measured by the power in the solar intensity fluctuations, shows no correlation with the measured amplitude of the velocity fluctuations, over 2 orders of magnitude.Proceedings of the 14th ESLAB Symposium on Physics of Solar Variations, 16–19 September 1980, Scheveningen, The Netherlands.     

Apport de l'imagerie satellitaire radar pour l'exploration géologique en zones arides

The potential of radar imagery in geological exploration was investigated at a study site in Mauritania (Akjoujt region). Compared with optical images, the results obtained show how radar imagery can help not only in detecting surface geological structures such as dykes and veins, but also mapping subsurface structures beneath a shallow layer of sand (palaeochannels). The mapping potential was found to be much better at long wavelengths than at short ones (L-band, compared with C- and X-band). As for optical images, their contribution is much more limited in the mapping of surface geological structures, and inappropriate for detecting subsurface structures. We conclude that spatial remote sensing enables the improvement of existing geological maps and the optimization of cartographic surveying. To cite this article: N. Baghdadi et al., C. R. Geoscience 337 (2005).     

Velocity constraints for the inner core inferred from long-period PKP amplitudes

Long-period PKP amplitudes from 16 earthquakes in the distance range 110– 170° are compared with theoretical amplitudes which are derived from synthetic seismograms calculated for 56 systematic modifications of Earth model 1066B in the inner core. A suitable normalization procedure allows for the common representation of all observed amplitudes as a function of epicentral distance. Using the theoretical amplitude distributions it can be shown that the parameters of a regression line through the logarithmic and normalized amplitudes between 110 and 134° are related to the velocity and density jump at the inner-core boundary (ICB). The analysis shows that the dominant influence on the PKP amplitudes is the P-velocity jump which can be restricted to 0.64 ± 0.05 km s^?1. There exists a trade-off between the S-velocity jump and the density jump. Restricting the latter to the reasonable range 0–1.2 g cm^?3 the S-velocity jump at the ICB can be inferred to be 2.5–3.0 km s^?1. A rather strong S-velocity gradient below the ICB follows from the condition that the S-wave travel-time through the inner core agrees with that implied by free oscillation observations. This leads to central S-velocities between 3.81 and 4.15 km s^?1, assuming a parabolic velocity law.     

Evidence of hydrothermal fluid flow in a hyperextended rifted margin: the case study of the Err nappe (SE Switzerland)

This paper investigates hydrothermal fluid circulation in pre- and syn-tectonic sediments associated with detachments faults. The study area, located in the Err Nappe (SE-Switzerland), preserves a portion of the Adriatic distal margin. Two sites were studied in combining fieldwork, petrography, geochemistry and fluid inclusion analysis: the Piz Val Lunga and Fuorcla Cotschna areas. Both preserve relationships between a spectacularly exposed rift-related extensional detachment fault and its footwall and hangingwall that consist of extensional allochthons and syn- to post-tectonic sediments. These areas register a complex fluid flow history characterized by dolomitization, de-dolomitization, calcite cementation, dolomite and quartz veining and diffuse silicification. Meso- and micro-scale observations allow defining two steps in fluid evolution, which are related to Jurassic rift activity. A first carbonate-rich event occurred before the exhumation of the granitic basement, and this was followed by a second event marked by a change in the fluid towards a silica-dominated chemistry. Homogenization temperatures of fluid inclusions (average T_h = 120?130 °C), negative δ¹⁸O values and a radiogenic ⁸⁷Sr/⁸⁶Sr signatures of carbonate minerals support the hypothesis that both the pre-tectonic rocks constituting the allochthons and the syn-tectonic sediments overlying the detachment fault were crossed by a flux of over-pressured hydrothermal fluids originating from seawater that penetrated into the basement through fault and fracture systems. Field relationships show that this fluid circulation started latest in middle Early Jurassic time, when fault activity migrated from the proximal to the future distal margin. We propose that it evolved chemically as a result of the involvement of the granitic basement forming the footwall of the extensional detachment system. Hydrothermal activity continued until the Middle/Late Jurassic, when tectonic activity shifted outwards leading to the exhumation of mantle rocks. This paper provides an original contribution to better understand the complex evolution of hyperextended continental rift domains and to constrain their thermal regimes.     

Mediterranean outflow through the Strait of Gibraltar since 18,000 Years B.P.: Mineralogical and geochemical arguments

Data obtained from mineralogical and geochemical analyses of piston and gravity cores, recovered from an area off Lisbon (Portugal) to the Alboran Sea (Mediterranean), serve as a basis for better understanding the past 18,000 years of hydrological exchanges at Gibraltar. Tracers used in this study are smectite, kaolinite, Ta, Th, La. One of the primary sources of particles both into and out of the Mediterranean is the Guadalquivir River. These particles are transported back into the Atlantic in the Mediterranean outflow water, and deposited along the Iberian slope. No evidence for reversal of this outflow current was found in those cores, since 18,000 years B.P.     

Methane release and the carbon cycle on Mars

It has been suggested that the present release rate of methane to the Martian atmosphere could be the result of serpentinization in the deep subsurface, followed by the conversion of H₂ to CH₄ in a CO₂-rich fluid. Making this assumption, we show that the cryosphere could act as a buffer storing, under the form of micron-size methane clathrate particles, the methane delivered from below by hydrothermal fluids and progressively releasing it to the atmosphere at the top. From an extrapolation of the present CH₄ release rate back to the past, we calculate that up to several hundred millibars (～200–2000 mbar) of CO₂, resulting from the oxidation of the released CH₄, in addition to the volcanic supply (～400 mbar), should have accumulated in the atmosphere in the absence of a CO₂ sink. We reassess the capability of escape to have removed CO₂ from the atmosphere by C non-thermal escape and show that it is not significant. We suggest that atmospheric carbon is recycled to the crust through an active subsurface hydrological system, and precipitates as carbonates within the crust. During episodic periods of magmatic activity, these carbonates are decomposed to CO₂ dissolved in running water, and CO₂ can react with H₂ formed by serpentinization to build CH₄. CH₄ is then buffered in the subsurface cryosphere, above the water table, and finally released to the atmosphere, before being recycled to the subsurface hydrological system, and converted back to carbonates. We propose a typical evolution curve of the CO₂ pressure since the late Noachian based on our hypothesis. Contrary to the steady state carbon cycle at work on Earth, a progressive damping of the carbon cycle occurs on Mars due to the absence of plate tectonics and the progressive cooling of the planet.     

Reliable Procedure for Molecular Analysis of Airborne Microflora in Three Indoor Environments: An Office and Two Different Museum Contexts

Biological aerosols from air constitute a significant source of exposure to microorganisms in public places. Airborne microorganisms are involved in the development of certain respiratory symptoms, allergies, or infections among users and occupants. Various sampling instruments have commonly been used in aerobiology to collect bacteria and fungi suspended in the air. The objective of this study was to develop a reliable procedure for sampling in indoor public environments presenting different levels of occupancy, airborne bacteria and fungi to be subjected to molecular analysis (bacteria and fungi quantitative PCR, capillary electrophoresis single strand conformation polymorphism fingerprinting). Four different sampling devices were tested in situ in an office building (open‐plan type) and the sampling strategy chosen was tested in two museum contexts. In accordance with the drawbacks involved to our study (quantitative and qualitative aspects, cost, and overcrowding), cyclone device appeared to be most suitable. The results underline the effectiveness of this high‐volume aerosol sampling device for both qualitative and quantitative molecular analysis. Four in situ sampling collections were carried out in 1 day in the Louvre Museum to study quantitative and qualitative variations of airborne bacterial and fungal diversity. The quantitative results revealed a similar order of magnitude for the numbers of both bacteria and fungi. In the Louvre Museum, the samples yielded between 3.7 × 10⁴ and 4.1 × 10⁴ genome equivalent (GE) bacteria/m³ air and between 5.0 × 10⁴ and 5.9 × 10⁴ GE fungi/m³ air and in the Decorative Arts Museum between, 2.1 × 10⁴ and 2.5 × 10⁴ GE bacteria/m³ air and between 1.4 × 10⁴ and 1.7 × 10⁴ GE fungi/m³ air. The results also indicate that the dominant bacterial community displayed a stable structure over a short period of time whereas dominant eukaryotic airborne community appeared more variable.     

TomograPy: A Fast, Instrument-Independent, Solar Tomography Software

Solar tomography has progressed rapidly in recent years thanks to the development of robust algorithms and the availability of more powerful computers. It can today provide crucial insights in solving issues related to the line-of-sight integration present in the data of solar imagers and coronagraphs. However, there remain challenges such as the increase of the available volume of data, the handling of the temporal evolution of the observed structures, and the heterogeneity of the data in multi-spacecraft studies. We present a generic software package that can perform fast tomographic inversions that scales linearly with the number of measurements, linearly with the length of the reconstruction cube (and not the number of voxels), and linearly with the number of cores and can use data from different sources and with a variety of physical models: TomograPy ( http://nbarbey.github.com/TomograPy/ ), an open-source software freely available on the Python Package Index. For performance, TomograPy uses a parallelized-projection algorithm. It relies on the World Coordinate System standard to manage various data sources. A variety of inversion algorithms are provided to perform the tomographic-map estimation. A test suite is provided along with the code to ensure software quality. Since it makes use of the Siddon algorithm it is restricted to rectangular parallelepiped voxels but the spherical geometry of the corona can be handled through proper use of priors. We describe the main features of the code and show three practical examples of multi-spacecraft tomographic inversions using STEREO/EUVI and STEREO/COR1 data. Static and smoothly varying temporal evolution models are presented.     

Coronal Temperature Maps from Solar EUV Images: A Blind Source Separation Approach

Multi-wavelength solar images in the extreme ultraviolet (EUV) are routinely used for analysing solar features such as coronal holes, filaments, and flares. However, images taken in different bands often look remarkably similar, as each band receives contributions coming from regions with a range of different temperatures. This has motivated the search for empirical techniques that may unmix these contributions and concentrate salient morphological features of the corona in a smaller set of less redundant source images. Blind Source Separation (BSS) does precisely this. Here we show how this novel concept also provides new insight into the physics of the solar corona, using observations made by SDO/AIA. The source images are extracted using a Bayesian positive source-separation technique. We show how observations made in six spectral bands, corresponding to optically thin emissions, can be reconstructed by a linear combination of three sources. These sources have a narrower temperature response and allow for considerable data reduction, since the pertinent information from all six bands can be condensed into a single composite picture. In addition, they give access to empirical temperature maps of the corona. The limitations of the BSS technique and some applications are briefly discussed.