A new standardized Palmer drought index for hydro‐meteorological use

Accepting the concept of standardization introduced by the standardized precipitation index, similar methodologies have been developed to construct some other standardized drought indices such as the standardized precipitation evapotranspiration index (SPEI). In this study, the authors provided deep insight into the SPEI and recognized potential deficiencies/limitations in relating to the climatic water balance it used. By coupling another well‐known Palmer drought severity index (PDSI), we proposed a new standardized Palmer drought index (SPDI) through a moisture departure probabilistic approach, which allows multi‐scalar calculation for accurate temporal and spatial comparison of the hydro‐meteorological conditions of different locations. Using datasets of monthly precipitation, temperature and soil available water capacity, the moisture deficit/surplus was calculated at multiple temporal scales, and a couple of techniques were adopted to adjust corresponding time series to a generalized extreme value distribution out of several candidates. Results of the historical records (1900–2012) for diverse climates by multiple indices showed that the SPDI was highly consistent and correlated with the SPEI and self‐calibrated PDSI at most analysed time scales. Furthermore, a simple experiment of hypothetical temperature and/or precipitation change scenarios also verified the effectiveness of this newly derived SPDI in response to climate change impacts. Being more robust and preferable in spatial consistency and comparability as well as combining the simplicity of calculation with sufficient accounting of the physical nature of water supply and demand relating to droughts, the SPDI is promising to serve as a competent reference and an alternative for drought assessment and monitoring. Copyright © 2013 John Wiley & Sons, Ltd.     

Displacement analytical prediction of shallow tunnel based on unified displacement function under slope boundary

For slope condition of ground surface, the asymmetrical deformation about the vertical center line and the horizontal center line of the tunnel cross section can be formed. A unified displacement function expressed by the Fourier series is presented to express the asymmetrical deformation of the tunnel cross section. Five basic deformation modes corresponding to the expansion order 2 are a complete deformation mode to reflect deformation behaviors of the tunnel cross section under slope boundary. Such this complete displacement mode is implemented into the complex variable solution for analytically predicting tunneling-induced ground deformation under slope boundary. All of these analytical solutions are verified by good agreements of the comparison between the analytical solutions and finite element method results. A parameter study is carried out to investigate the influence of deformation modes of the tunnel cross section, geometrical conditions of the tunnel and the slope angle, and “Buoyancy effect” on the displacement field. Finally, the proposed method is consistent with measured data of the Hejie tunnel in China qualitatively. The presented solution can provide a simplified indication for evaluating the ground deformation under slope condition of ground surface.     

The impact of deformation on vortex development in a baroclinic moist atmosphere

A mathematical relation between deformation and vertical vorticity tendency is built by introducing the frontogenesis function and the complete vertical vorticity equation, which is derived by virtue of moist potential vorticity. From the mathematical relation, it is shown that properly configured atmospheric conditions can make deformation exert a positive contribution to vortex development at rates comparable to other favorable factors. The effect of deformation on vortex development is not only related to the deformation itself, but also depends on the current thermodynamic and dynamic structures of the atmosphere, such as the convective stability, moist baroclinicity and vertical wind shear(or horizontal vorticity). A diagnostic study of a heavy-rainfall case that occurred during 20–22 July 2012 shows that deformation has the most remarkable effect on the increase in vertical vorticity during the rapid development stage of the low vortex during its whole life cycle. This feature is mainly due to the existence of an approximate neutral layer(about 700 h Pa) in the atmosphere where the convective stability tends to be zero. The neutral layer makes the effect of deformation on the vertical vorticity increase significantly during the vortex development stage, and thus drives the vertical vorticity to increase.     

淮河流域夏季降水异常与若干气候因子的关系

基于旋转经验正交函数分解 (REOF) 方法探讨淮河流域1961—2010年夏季降水与厄尔尼诺/南方涛动 (ENSO)、北大西洋涛动 (NAO)、印度洋偶极子 (IOD)、太平洋年代际振荡 (PDO) 之间的关系,并进一步分析各气候因子不同位相单独以及联合对淮河流域夏季降水的影响。结果表明:淮河流域夏季降水与ENSO,PDO,NAO,IOD等气候因子具有较稳定的相关性,其中,PDO和IOD是影响淮河流域夏季降水的关键因子,且PDO与夏季降水呈显著负相关关系;各气候因子的冷暖位相单独及联合对淮河流域夏季降水的影响不同,PDO的冷期以及NAO,IOD冷位相使流域北部的夏季降水量呈显著增加趋势,PDO分别联合ENSO,NAO和IOD的冷、暖位相对流域北部地区和淮河上游地区的夏季降水影响显著。     

天山南麓雷暴日短期预报研究

利用阿克苏及邻近地区12个气象站1980—2013年雷暴资料,以及同期高空资料,统计了各站年均雷暴日数,对发生区域雷暴天气的环流形势进行分类,归纳出各型的入型指标。通过逐步回归法,建立阿克苏及邻近地区区域雷暴概率回归预报模型,并对2013年进行试预报。结果表明:(1)阿克苏及邻近地区区域雷暴的影响系统主要分为4类:巴湖低槽型、急流型、西北气流型和温度槽型。(2)对2002—2012年5—9月(共1683 d)历史资料进行判别,满足入型条件的样本数为876 d,消空率为48%;对2013年5—9月(共153 d)历史资料进行判别,入型样本数为80 d,消空率为48%。(3)对2002—2012年5—9月所有入型样本进行回代检验,平均准确率为72.0%(平均TS评分为30.1%);对2013年5—9月所有入型样本进行试预报,平均准确率为63.2%(平均TS评分为28.2%)。     

Two Methods for Predicting Reliability Index and Critical Probabilistic Slip Surface of Soil Slopes

Two methods of reliability analysis of soil slopes are studied, and the representative flow charts of both methods are illustrated. Method 1 can predict the reliability index and the critical probabilistic slip surface directly and it is computational efficient, but it needs the development of new codes for integrating the reliability analysis code and the slope stability code. Method 2 makes the reliability analysis code call the slope stability analysis code directly, and each code can be considered as an intact part. The main result of Method 2 is the reliability index of soil slope. Combined with the proposed method for locating the critical slip surface, Method 2 can also predict the probabilistic slip surface. Although Method 2 needs much more callings of the subprogram of slope stability analysis code, it needs not the developing of new computer program. Thus, Method 2 is easy to use and can be applied to different reliability analysis methods and slope stability analysis methods.     

Regional debris flow susceptibility analysis based on principal component analysis and self-organizing map: a case study in Southwest China

A method was developed to analyze the susceptibilities of 541 regional basins affected by debris flows at the Wudongde Dam site in southwest China. Determining susceptibility requires information on source material quantity and occurrence frequency. However, the large number of debris flows can hinder the individual field investigation in a each small basin. Factors that may trigger debris flows can be identified using remotely sensed interpretation information. Susceptibility analysis can then be conducted based on these factors. In this study, SPOT5 satellite imagery, digital elevation models (DEM), a lithology distribution map, and rainfall monitoring data were used to identify 12 debris flow trigger factors: basin relief ratio, slope gradient in the initiation zone, drainage density, downslope curvature of the main channel, vegetation coverage, main channel aspect, topographic wetness index, Melton’s ruggedness number, lithology, annual rainfall, form factor, and cross-slope curvature of the transportation zone. Principal component analysis was used to obtain the eight principal components of these factors that contribute to susceptibility results. Then, a self-organizing map method was adopted to analyze the principal components, which resulted in a debris flow susceptibility classification. Field validation of 26 debris flow basins was used to evaluate the errors of the susceptibility classification, as well as assess the causes of such errors. The study found that principle component analysis and self-organizing map methodologies are good predictors of basin susceptibility to debris flows.     

Molybdenum Mass Fractions and Isotopic Compositions of International Geological Reference Materials

The double‐spike method with multi‐collector inductively coupled plasma‐mass spectrometry was used to measure the Mo mass fractions and isotopic compositions of a set of geological reference materials including the mineral molybdenite, seawater, coral, as well as igneous and sedimentary rocks. The long‐term reproducibility of the Mo isotopic measurements, based on two‐year analyses of NIST SRM 3134 reference solutions and seawater samples, was ≤ 0.07‰ (two standard deviations, 2s, n = 167) for δ^98/95Mo. Accuracy was evaluated by analyses of Atlantic seawater, which yielded a mean δ^98/95Mo of 2.03 ± 0.06‰ (2s, n = 30, relative to NIST SRM 3134 = 0‰) and mass fraction of 0.0104 ± 0.0006 μg g^?1 (2s, n = 30), which is indistinguishable from seawater samples taken world‐wide and measured in other laboratories. The comprehensive data set presented in this study serves as a reference for quality assurance and interlaboratory comparison of high‐precision Mo mass fractions and isotopic compositions.