面向蓝藻的洱海气象监测站布局方法

针对洱海流域蓝藻预警研究所需的气象数据不足的问题,提出洱海气象监测站优化布局方法,采用环境影响统计概念模型分析了对环境产生影响的主要经济因素,根据水体污染指标将洱海各个行政区分为高污染区和低污染区,再考虑汇入洱海支流是否流经高污染区,认为在高污染区支流汇入口是蓝藻发生概率较高的区域。依据2个主要参数:区域污染程度和支流入口,部署气象监测站,该监测站能为洱海蓝藻预警研究提供必要、准确和可靠的水面气温、降雨量以及日照长度等气象参数,将对水环境的监测和研究具有重大意义和广泛应用前景。     

Grid pattern recognition in road networks using the C4.5 algorithm

Pattern recognition in road networks can be used for different applications, including spatiotemporal data mining, automated map generalization, data matching of different levels of detail, and other important research topics. Grid patterns are a common pattern type. This paper proposes and implements a method for grid pattern recognition based on the idea of mesh classification through a supervised learning process. To train the classifier, training datasets are selected from worldwide city samples with different cultural, historical, and geographical environments. Meshes are subsequently labeled as composing or noncomposing grids by participants in an experiment, and the mesh measures are defined while accounting for the mesh’s individual characteristics and spatial context. The classifier is generated using the C4.5 algorithm. The accuracy of the classifier is evaluated using Kappa statistics and the overall rate of correctness. The average Kappa value is approximately 0.74, which corresponds to a total accuracy of 87.5%. Additionally, the rationality of the classifier is evaluated in an interpretation step. Two other existing grid pattern recognition methods were also tested on the datasets, and comparison results indicate that our approach is effective in identifying grid patterns in road networks.     

The effect of slight to minor biodegradation on C<Subscript>6</Subscript> to C<Subscript>7</Subscript> light hydrocarbons in crude oils: a case study from Dawanqi Oilfield in the Tarim Basin,NW China

Light hydrocarbons (LHs) are one of the main petroleum fractions in crude oils, and carry much information regarding the genetic origin and alteration of crude oils. But secondary alterations—especially biodegradation—have a significant effect on the composition of LHs in crude oils. Because most of the LHs affected in oils underwent only slight biodegradation (rank 1 on the biodegradation scale), the variation of LHs can be used to describe more the refined features of biodegradation. Here, 23 crude oils from the Dawanqi Oilfield in the Tarim Basin, NW China, eleven of which have been biodegraded to different extents, were analyzed in order to investigate the effect of slight to minor biodegradation on C₆–C₇ LHs. The study results showed that biodegradation resulted in the prior depletion of straight-chained alkanes, followed by branched alkanes. In slight and minor biodegraded oils, such biodegradation scale could not sufficiently affect C₆–C₇ cycloalkanes. For branched C₆–C₇ alkanes, generally, monomethylalkanes are biodegraded earlier than dimethylalkanes and trimethylalkanes, which indicates that branched alkanes are more resistant to biodegradation, with the increase of substituted methyl groups on parent rings. The degree of alkylation is one of the primary controlling factors on the biodegradation of C₆–C₇ LHs. There is a particular case: although 2,2,3-trimethylbutane has a relative higher alkylation degree, 2,2-dimethylpentane is more resistant to biodegradation than 2,2,3-trimethylbutane. 2,2-Dimethylpentane is the most resistant to biodegradation in branched C₆–C₇ alkanes. Furthermore, the 2-methylpentane/3-methylpentane and 2-methylhexane/3-methylhexane ratios decreased steadily with increasing biodegradation, which implies that isomers of bilateral methyl groups are more prone to bacterial attack relative to mid-chain isomers. The position of the alkyls on the carbon skeleton is also one of the critical factors controlling the rate of biodegradation. With increasing biodegradation, Mango’s LH parameters K1 values decrease and K2 values increase, the values of n-heptane and isoheptane decrease, and the indices of methylcyclohexane and cyclohexane increase. LH parameters should be applied cautiously for the biodegraded oils. Because biodegraded samples belong to slight or minor biodegraded oils, the values of n-heptane and isoheptane from Dawanqi Oilfield can better reflect and determine the “Biodegraded” zone. When the heptane value is 0–21 and the isoheptane value is 0–2.6, the crude oil in Dawanqi Oilfield is defined as the “Biodegraded” zone.     

不同地形条件地面同步光谱定标场对比研究

利用美国ASD公司的FieldSpec Pro FR地面波谱仪,选择5°视场角探头和135cm探头距测试地物高度,开展0°、5°、10°、15°、20°等五种不同地形坡度明、暗地物自然定标场地面波谱测试。通过对比研究不同地形坡度具代表性、能真实反映被测试目标平均自然性的各波谱测试点波谱曲线特征,得出0°、5°地形坡度获取的波谱曲线连续、平滑,信噪比高,没有混入大气水气吸收、仪器噪声等因素导致的剧烈波动、跳跃现象或尖锐锯齿状噪声,波谱特征明显,吸收峰最小值位置清晰可辨,各波谱测试点波谱曲线变化幅度小,整体反射率值变化小,Fe~(2+)、Fe~(3+)、Al-OH、Mg-OH、CO_3~(2-)等分子基团与离子波谱的诊断性波谱特征位置清晰可辨。因此0°和5°坡度地形条件获取的地面同步自然场光谱定标波谱曲线,可以满足航空高光谱遥感数据的大气校正、光谱重建和空、地回归分析等所需的地面波谱数据要求。     

金川铜镍矿床中新生代抬升冷却过程：来自裂变径迹的证据

本文基于热年代学理论,利用锆石和磷灰石裂变径迹测年数据及对磷灰石热史的模拟,分析探讨金川铜镍矿床在中新生代的抬升冷却过程,认为金川超基性岩体自中生代以来一直处于持续的冷却抬升阶段,且在中侏罗世和晚白垩世早期经历了两期快速的抬升冷却事件,推断此事件与青藏高原后期活动时间相对应,证明金川岩体受到该事件的远程效应波及,致使该矿床遭受了一定的改造。     

钟姑地区典型矿床的重磁找矿模式

钟姑地区位于宁芜中生代火山岩盆地南段,已发现有白象山铁矿等多个大型铁矿,是长江中下游成矿带以玢岩型铁矿为主的矿集区。本文以钟姑地区实测岩石物性参数为桥梁,以实测重磁数据为基础,分析了该区白象山铁矿、钟九铁矿和云楼铁矿的重磁场分布特征,并根据典型矿区已知地质条件,运用成熟的2.5D重磁联合反演技术进行计算,从定量角度认识铁矿体深部发育形态、位置与重磁异常之间对应关系,建立钟姑地区白象山铁矿等典型矿床的重磁找矿模式,为该区进一步找矿突破提供地球物理场信息。     

钦-杭成矿带东段村前含矿斑岩地球化学特征及其构造环境与成矿意义

村前铜多金属矿床位于钦杭成矿带东段,为一具有矽卡岩型矿化和斑岩型矿化的铜多金属矿床,含矿岩体为燕山早期花岗闪长斑岩,岩石具有富硅、富铝、富碱的特点,属于偏铝-过铝质钙碱性花岗岩类。岩体具有从深部向浅部蚀变增强,大部分组分活动性不明显,而成矿元素Cu-Mo-Fe-Pb-Zn-Au-Ag含量明显增加,Na2O、Sr含量降低,REE元素除Eu少量丢失外,其余均呈一致的迁入特征。岩体属Ⅰ型花岗质岩石,由具角闪石+石榴子石残留相的火成岩部分熔融形成的熔浆,混合或混染了地壳重熔型岩浆上侵就位而成。钦杭结合带东段,燕山期中酸性岩浆活动具有从176~150Ma的埃达克岩或具岛弧花岗岩特征的Ⅰ型花岗岩,至150~140Ma的S型花岗岩,向140~110Ma的A型花岗岩演化趋势,显示了地壳由厚减薄的过程,暗示其大地构造背景为岩石圈的伸展减薄环境,而形成于169.3±1.1Ma的村前斑岩体正处于伸展阶段早期。综合岩体成矿特征表明,钦杭成矿带东段及邻近地区,176~160Ma主要形成与Ⅰ型花岗质岩石有关的以Cu为主的多金属矿床;160~150Ma主要形成与Ⅰ型花岗质岩石有关的Cu-Mo矿床与W-Sn矿床;150~140Ma主要形成与S型花岗质岩石有关的以W-Sn-Mo为主的多金属矿床,以及以Ag-Pb-Zn为主的多金属矿床;140~110Ma主要形成与A型花岗质岩石有关的以W-Sn-Mo为主的多金属矿床,少量与Ⅰ型花岗质岩石有关的Pb-Zn矿床。     

辽宁省地下水动态成因类型分析

根据辽宁省2006—2010年地下水水位实际监测数据,分析地下水水位动态变化规律、形成原因及发展趋势,再结合地下水动态变化的自然与人为影响控制因素,以及地下水的补给、径流、排泄条件等,将辽宁省地下水动态成因类型划分为:气候型、开采型、灌溉型、水文型和径流型,经过较为全面系统的统计分析计算,绘制出地下水动态变化历时曲线,对五种地下水动态成因类型分别予以较为详细的综合分析研究,总结出辽宁省地下水动态变化规律特征。     

Mechanical characteristics of dip basement effects on dump stability in the Shengli open pit mine in Inner Mongolia,China

For waste dump slopes that form basements, landslides can be prevented by determining a stability evolving law of dynamic development. Keeping this issue in mind, the relationship between the mechanical structure and stability of waste dumps with basements is studied. Three key factors that influence waste dump stability are presented, and judgment criteria for self-locking and unlocking states of dump basements are provided. From the friction coefficient of waste dump basement stability analyses of the Shengli open pit mine, the results indicate that waste dump basements on the right side of fault F8 and on the left side of fault F61 are subjected to self-locking. However, between faults F61 and F8, the basement is subjected to unlocking. Regarding the residual thrusting of unlocking areas, structure and stability optimization schemes for waste dumps in the Shengli open pit mine are provided through a mechanics analysis. Reducing the slopes and basement angles of waste dumps can enhance their stability by increasing basement roughness levels.