Variations in wave direction estimated using first and second order Fourier coefficients

In most design applications such as alignment of the berthing structure and breakwater alignment, it becomes necessary to determine the direction of design wave. There are two different approaches to determine wave direction. One involves the use of first order Fourier coefficients (mean wave direction) while the other uses second order Fourier coefficients (principal wave direction). Both the average wave direction over the entire frequency range (0.03–0.58 Hz) and the direction corresponding to the peak frequency are used in practice. In the present study, comparison is made on wave directions estimated based on first and second order Fourier coefficients using data collected at four locations in the west and east coasts of India. Study shows that at all locations, the mean and principal wave directions for frequencies ranging from 0.07 to 0.25 Hz (±0.5 times peak frequency) co-vary with a correlation coefficient of 0.99 but at lower and higher frequencies, difference between the parameters is large. Average difference between the mean wave direction at peak frequency and the average over the frequency related to spectral energy more than 20% of maximum value is less, around 13°. Study shows that average difference in the sea and swell directions is around 39°.     

Simulating a heavy metal spill under estuarine conditions: Effects on the clam Scrobicularia plana

We describe the effect of heavy metals Zn, Cd, Pb and Cu on the induction of methallothioneins on the clam Scrobicularia plana along a salinity gradient simulated under laboratory conditions. The clams were exposed to constant heavy metal concentrations in a dynamic estuary simulator during a 15-day assay to investigate possible induction of metal-binding proteins in them. The concentration of heavy metals in water was analysed. Clams were analysed for methallothionein concentrations. The speciation of Zn, Cd, Pb and Cu along the salinity gradient was modelled. Zn showed the highest concentrations and its prevalent species was the free ion. Intersite differences have been observed in methallothionein concentration and related to the salinity gradient. It seems that synthesis of methallothioneins is the result of physiological forces acting in concert with the changes in the chemical speciation of metals, owing to the trace metals uptake is controlled by means of an interaction of physiology and physicochemistry.     

Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.     

A new form of generalized Boussinesq equations for varying water depth

A new set of equations of motion for wave propagation in water with varying depth is derived in this study. The equations expressed by the velocity potentials and the wave surface elevations include first-order non-linearity of waves and have the same dispersion characteristic to the extended Boussinesq equations. Compared to the extended Boussinesq equations, the equations have only two unknown scalars and do not contain spatial derivatives with an order higher than 2. The wave equations are solved by a finite element method. Fourth-order predictor–corrector method is applied in the time integration and a damping layer is applied at the open boundary for absorbing the outgoing waves. The model is applied to several examples of wave propagation in variable water depth. The computational results are compared with experimental data and other numerical results available in literature. The comparison demonstrates that the new form of the equations is capable of calculating wave transformation from relative deep water to shallow water.     

Response of the barrier island coastal region of southwestern Nigeria to climate and non-climate forcing

Despite threats emanating from the influence of climate and non-climate forcing on the barrier island coastal region of southwestern Nigeria, the extent of the coastal erosion is poorly understood. We report evidence of coastal erosion and sediment accumulation in the region over a 34-year period (1973–2017), using Landsat imagery at intervals of approximately six years. Landsat image corrections and various water-extraction algorithms were used to systematically delineate coastal erosion and accumulation in the area. The region was subdivided into western and eastern subregions separated by Lagos Harbour. In the west, erosion took place during the periods 1973–1979, 1979–1984, 1990–1999 and 2005–2011, whereas in the east, erosion occurred during 1973–1979, 1990–1999 and 1999–2005. Coastal sediment accumulation occurred in the east during 1979–1984, 1984–1990, 2005–2011 and 2011–2017, whereas gains in the west occurred during 1984–1990, 1999–2005 and 2011–2017. The study revealed substantial net erosion of 1 228.1 ha in the region as a whole, over the full period. Sediment accumulation accompanying the coastal erosion appears to be linked to longshore drift. Erosion between 1973 and 2011 was probably attributable to climate change (storms and tidal conditions), longshore drift, the inflow and outflow of water at Lagos Harbour, coastal morphology and, possibly, human impacts. However, the coastal changes between 2011 and 2017 were more obviously associated with human activities, such as development of the Eko Atlantic construction project. Coastal surveillance, together with the use of environmentally sensitive protective measures, could possibly help to reduce coastal erosion in the region. Careful coastal management practices, including artificial nourishing and the installation of resilient structures (e.g. seawalls), should be undertaken to protect human settlements that are already at risk from sea-level rise.     

Retention and fate of experimentally added mercury in a Massachusetts salt marsh treated with sewage sludge

A simple, rapid, precise and reproducible procedure is described for sample preparation, extraction and measurement of total mercury in peaty sediments, plants and animal tissues. Various amounts of a heavy metal containing dried sewage sludge were applied to experimental plots in a New England salt marsh. This treatment resulted in elevation of mercury levels in the surface 5 cm of the soil. Discrepancies in the bulk density of marsh sediments corresponded with interparticle spaces and detritus/mineral ratios in the peat matrix. Mass balance calculations showed that wetlands covered with tall Spartina alterniflora lost mercury considerable faster than higher marsh locations which retained virtually all mercury added. The shortest halflife of mercury calculated was four years. Grain size analyses of peat and sewage sludge suggested that mercury in the higher intertidal range remained associated with sludge components. Biochemical and physical processes affecting the dissipation of mercury from creek side sediments are discussed.     

Submerged cylinder wave energy device: theory and experiment

Linearized water wave theory is used to show that a submerged long circular cylinder suitably constrained by springs and dampers to make small harmonic oscillations, can be extremely efficient in absorbing the energy in an incident regular wave whose crests are parallel to the axis of the cylinder. Experimental results are described which confirm the theory for small amplitude waves and which suggest that the device can still be fairly efficient in waves of moderate amplitude.     

Towards a more detailed seismic picture of the oceanic crust and mantle

A review is presented of current interpretation techniques in marine refraction seismology with particular emphasis on those features which are most useful in structural studies using ocean bottom seismometers. Travel time analysis techniques are discussed for both refraction and variable angle reflection profiles and are compared with systematic travel time inversion methods. Amplitude and waveform analysis techniques allow a more detailed velocity depth profile to be determined, and are illustrated for both surface and bottom receivers. The study of anisotropy and lateral variations in crustal structure may be usefully combined using delay time function methods but a detailed structural model also requires velocity-depth information. Signal processing techniques which are particularly useful for shear wave and long range propagation studies are also metioned. Structural studies using OBS' should lead to detailed knowledge of the oceanic crust and the P wave velocity distribution in the upper mantle.     

A study of the subarctic boundary region in the Western North Pacific

During autumn 1968 an oceanographic investigation was conducted in the region of the Subarctic boundary between 155°E and 180°. The geostrophic flow of the upper 500 m was remarkably similar in direction; hence the salinity-minimum, Intermediate water must have the same path of flow as water at the surface. A water mass analysis revealed a decrease in the percentage of Subarctic water to the south and east, plus an increase in the homogeneity of water to the east, which supports Reid's conclusions that the salinity minimum results mainly from lateral mixing in the pycnocline in this region. Salinity at the minimum increases toward the south and east, and the density at this level also increases slightly from the western to the central Pacific, perhaps as a result of unequal vertical mixing above and below the minimum.     

Constraining the origin and evolution of confined turbidite systems: southern Cretan margin,Eastern Mediterranean Sea (34°30–36°N)

Bathymetric, 9.5-kHz long-range sidescan sonar (OKEAN), seismic reflection and sediment-core data are used in the analysis of two tectonic troughs south of Crete, Eastern Mediterranean Sea. Here, up to 1.2 s two-way travel time (TWTT) of strata have accumulated since the Middle Miocene in association with extension in the South Aegean region. The study area comprises >100-km- long by >25-km-wide basins filled by sediments subdivided into two seismic units: (1) an upper Unit 1 deposited in sub-basins which follow the present-day configuration of the southern Cretan margin; (2) a basal Unit 2, more than 500 ms (TWTT) thick, accumulated in deeper half-graben/grabens distinct from the present-day depocentres. Both units overlap a locally stratified Unit 3 comprising the pre-Neogene core complex of Crete and Gavdos. In this work, the interpreted seismic units are correlated with the onshore stratigraphy, demonstrating that denudation processes occurring on Crete and Gavdos in response to major tectonic events have been responsible for high sedimentation rates along the proximal southern Cretan margin. Consequently, topographically confined sedimentary units have been deposited south of Crete in the last 12 Ma, including turbidites and other mass-flow deposits fed by evolving transverse and axial channel systems. Surface processes controlling facies distribution include the direct inflow of sediment from alluvial-fan systems and incising mountain rivers onto the Cretan slope, where significant sediment instability processes occur at present. In this setting, seismic profiles reveal eight different types of stratigraphic contacts on basin-margin highs, and basinal areas show evidence of halokinesis and/or fluid escape. The acquired data also show that significant changes to the margin’s configuration occurred in association with the post-Alpine tectonic and eustatic episodes affecting the Eastern Mediterranean.