Catagenesis and burial metamorphism of terrigenous and volcanic sequences (section recovered by the En-Yakhinskaya parametric borehole SG-7)

Secondary alterations of Cretaceous, Jurassic, and Triassic terrigenous complexes recovered by borehole SG-7 were studied from the depth of 3620 m to 6920 m (roof of basalts). Down to the depth of ∼6770 m, the section shows a gradual intensification of catagenetic alterations of sandy rocks: the formation of pressure dissolution textures and regeneration of clastic quartz. Intensification of the transformation of clay minerals is not observed in this mineral. Variations in the contents of illite, hydromicas, mixed-layer minerals, smectite, chlorite, and kaolinite at different depths of the recovered section are related to changes in the provenance during the accumulation of sedimentary complexes. The Middle Triassic coarse-grained sandy rocks (suprabasalt sequence) are more intensely transformed: they are marked by microstylolitic textures of pressure dissolution, recrystallization blastesis of clastic quartz grains, and newly formed zoisite. The composition of clay minerals is also characterized by variation: micas are represented by sericite with ΔD = 0; Fe-chlorite and kaolinite are noted. These features suggest the absence of linear positive correlation of T and P with the subsidence depth of sedimentary complexes. Intense heating (up to 200–300°C) of the Middle Triassic suprabasalt rocks is likely caused by trap activity (intense effusion of basalt lavas). Investigation of secondary minerals in basalts recovered by borehole SG-7 revealed that the grade of their transformation matches the medium-temperature subfacies of the greenschist facies.     

Assessment of cadmium,zinc and lead contamination in leaf and root of four various species

Heavy metals toxicity is a significant problem for ecological, evolutionary, nutritional and environmental reasons. This study was carried out to evaluate the amount of cadmium, zinc and lead absorption in leaf and root of pine, cypress, plantain and ash in Isfahan, Iran, in 2013. For this purpose, three heavy metals (Cd, Pb and Zn) and three sites (heavy traffic, moderate traffic and control) were chosen based on their effects on human health. The results indicated that the highest and lowest lead and cadmium concentrations belonged to heavy traffic site and control site, respectively. Cd in leaf versus Pb in leaf and Cd in root versus Pb in root had the highest correlation coefficient among the traits indicating positive influence of leaf and root on absorbing Cd and Pb from soil, water and air. In all the studied species, the concentration of Pb was higher than that of Cd and Zn. This was certainty due to the vehicle traffic emitting much more lead than cadmium and zinc. In all the studied species, metal concentration in leaves was higher than in roots, which may be due to high concentration of heavy metals in air than in soil. In this study, Pinus eldarica Medw. tree was found to be the best species to monitor polluted sites in Isfahan city.     

Provenance,weathering, and paleoenvironment of the Upper Cretaceous Duwi black shales,Aswan Governorate,Egypt

The mineralogy and geochemistry of the Upper Cretaceous Duwi black shales of Nile Valley district, Aswan Governorate, Egypt, have been investigated to identify the source rock characteristics, paleoweathering, and paleoenvironment of the source area. The Duwi Formation consists mainly of phosphorite and black shales and is subdivided into three members. The lower and upper members composed mainly of phosphorite beds intercalated with thin lenses of gray shales, while the middle member is mainly composed of gray shale, cracked, and filled with gypsum. Mineralogically, the Duwi black shales consist mainly of smectite and kaolinite. The non-clay minerals are dominated by quartz, calcite, phosphate, dolomite, feldspar, with little gypsum, anhydrite, iron oxides, and pyrite. Based on the CIA, PIA, and CIW values (average?=?84, 94, 95, respectively), it can be concluded that the litho-components of the studied shales were subjected to intense chemical weathering and reflect warm/humid climatic conditions in the depositional basin. The provenance discrimination diagram indicates that the nature of the source rocks probably was mainly intermediate and mafic igneous sources with subordinate recycled sedimentary rocks (Nubia Formation). Geochemical characteristics indicate that the Duwi black shales in Nile Valley district were deposited under anoxic reducing marine environments.     

Estimation of Block Sizes for Rock Masses with Non-persistent Joints

Summary  Discontinuities or joints in the rock mass have various shapes and sizes. Along with the joint orientation and spacing, the joint persistence, or the relative size of the joint, is one of the most important factors in determining the block sizes of jointed rock masses. Although the importance of joint persistence on the overall rock mass strength has long been identified, the impact of persistence on rock strength is in most current rock mass classification systems underrepresented. If joints are assumed to be persistent, as is the case in most designs, the sizes of the rock blocks tend to be underestimated. This can lead to more removable blocks than actually exist in-situ. In addition, a poor understanding of the rock bridge strength may lead to lower rock mass strengths, and consequently, to excessive expenditure on rock support. In this study, we suggest and verify a method for the determination of the block sizes considering joint persistence. The idea emerges from a quantitative approach to apply the GSI system for rock mass classification, in which the accurate block size is required. There is a need to statistically analyze how the distribution of rock bridges according to the combination of joint orientation, spacing, and persistence will affect the actual size of each individual block. For this purpose, we generate various combinations of joints with different geometric conditions by the orthogonal arrays using the distinct element analysis tools of UDEC and 3DEC. Equivalent block sizes (areas in 2D and volumes in 3D) and their distributions are obtained from the numerical simulation. Correlation analysis is then performed to relate the block sizes predicted by the empirical equation to those obtained from the numerical model simulation. The results support the concept of equivalent block size proposed by Cai et al. (2004, Int. J. Rock Mech. Min. Sci., 41(1), 3–19).     

Structural and petrological evidence for the continuation of the Isfahan fault system across the Urumieh-Dokhtar zone of central Iran

The Isfahan fault system, a north-trending, dextral strike-slip fault across the Sanandaj-Sirjan zone, represents the boundary between the northwestern and the southeastern parts of the Sanandaj-Sirjan zone and it terminates in the north at the southern boundary of the Urumieh-Dokhtar zone. This paper focuses on the continuation of the Isfahan fault system across the Urumieh-Dokhtar zone north of Isfahan city. The Urumieh-Dokhtar magmatic assemblage belt is located along the active margin of the Iranian plate and the Arabian plate. The Karkas fault strikes nearly north-south, has a length of about 40 km, a normal component of movement, and it truncates the Urumieh-Dokhtar zone. Due to the location of this fault and the mechanism similar to the Isfahan fault system, the Karkas fault can be considered a continuation of the Isfahan fault system that has been displaced dextrally by the southwestern bordering faults of the Urumieh-Dokhtar zone. The unique juxtaposition association of the Silurian volcanic rocks in the Urumieh-Dokhtar zone, near the Karkas fault, provides an important evidence regarding the major role of this fault in the geological evolution of the region. The Silurian volcanic rocks outcrop in two districts of the study area and generally are composed of basalts. The alkaline basalt composition is determined from mineralogy and immobile elements geochemistry. The geotectonic setting diagrams classified the Silurian volcanic rocks as the within plate basalts. Thus, an intracontinental rifting under extensional tectonic regime can be inferred as the setting that controlled formation of these volcanic rocks. They were created by an alkaline to transitional magmas generated due to low partial melting at depth. The alkaline basalts were most likely derived from an asthenosphere-dominated mantle source due to extension and partial melting. The north trending extensional faults affected thinned overlying continental lithosphere in the Paleozoic era, facilitating magma penetration and eruption.     

Removal of cadmium (II) from aqueous solution and natural water samples using polyurethane foam/organobentonite/iron oxide nanocomposite adsorbent

A novel polyurethane foam/organobentonite/iron oxide nanocomposite adsorbent was successfully prepared via in situ polymerization of toluene diisocyanate and polyol in presence of 5 wt% organobentonite/iron oxide. The obtained nanocomposite was characterized in detail, and the results revealed that the clay layers are exfoliated and/or intercalated in the polymer matrix forming a nanocomposite structure. The application of the prepared nanocomposite for adsorption of cadmium ions from aqueous solution was tested as a function of various experimental parameters using batch procedures. Adsorptive removal of Cd(II) onto the nanocomposite attained maximum at adsorbent content 1.5 g/L, pH 6, and the equilibrium was established within 60 min. Kinetic studies showed that the experimental data fit very well to pseudo-second-order model, and the adsorption process proceeds through three steps. It was found that external liquid film and intraparticle diffusion steps deeply affect the rate of Cd²⁺ ions adsorption onto the synthesized nanocomposite. Langmuir isotherm model fitted the adsorption data better than Freundlich with a maximum adsorption capacity (q _m) for Cd(II) equal to 78 mg/g under the specified experimental conditions. The synthesized nanocomposite afforded effective extraction for Cd²⁺ ions from natural water samples and excellent reusability feature. This study declares the potential efficiency of a new clay/polymer nanocomposite as alternative for wastewater remediation.     

First record of 1.2 Ga quartz dioritic magmatism in the Archaean Yilgarn Craton,Western Australia,and its significance

Farming of southern bluefin tuna in South Australia currently contributes to more than 30% of the value of the aquaculture production in Australia. This study investigated the natural sedimentary setting of the area designated for this important industry in coastal waters off Port Lincoln, and explored the links between the natural distribution of sediments and potential environmental effects and risks to the industry. Sediments were mostly composed of poorly sorted silts and fine sands, predominantly skeletal remains of carbonate-secreting organisms. The contribution of plankton to the organic matter remaining in the sediments was calculated to be in excess of 80% using concentration-dependent stable-isotope mixing models. An erosional area was identified south of Rabbit Island where sediments contained up to 50% siliciclastic material, grainsize distributions were better sorted and coarser, and organic carbon and total nitrogen contents were very low. In contrast, deeper waters north of Cape Donington were identified as a depocentre for fine sediments, which contained organic matter levels twice those elsewhere in the region despite the extremely high carbonate contents (>80%). The heavier stable isotopic signature of nitrogen suggested that this organic matter comprised a greater fraction of weathered components, probably advected to the area by suspended and bedload transport. This local variability of sediment characteristics in the farming zone suggests that the benthic assimilative capacity of farmed sites will depend on their location. Wastes from pens located south of Rabbit Island in particular are likely to be quickly winnowed out by wave and tidal action. These pens are also less likely to be affected by resuspension of fine sediments that might be associated with unusually severe storms.     

Rare-earth elements as source indicators of Pan-African granites from Obudu Plateau,Southeastern Nigeria

The rare-earth element （REE） concentrations of representative granite samples from the southeast of the Obudu Plateau, Nigeria, were analyzed with an attempt to determine the signatures of their source, evolutionary history and tectonic setting. Results indicated that the granites have high absolute REE concentrations （190×10^-6-1191×10^-6; av.=549×10^-6） with the chondrite-normalized REE patterns characterized by steep negative slopes and prominent to slight or no negative Eu anomalies. All the samples are also characterized by high and variable concentrations of the LREE （151×10^-6-1169×10^-6; av.= 466×10^-6）, while the HREE show low abundance （4×10^-6-107×10^-6; av.=28×10^-6）. These are consistent with the variable levels of REE fractionation, and differentiation of the granites. This is further supported by the range of REE contents, the chondrite-normalized patterns and the ratios of LaN/YbN （2.30-343.37）, CeN/YbN （5.94-716.87）, LaN/SmN （3.14-11.68） and TbN/YbN （0.58-1.65）. The general parallelism of the REE patterns, suggest that all the granites were comagmatic in origin, while the high Eu/Eu＊ ratios （0.085-2.807; av.=0.9398） indicate high fo2 at the source. Similarly, irregular variations in LaN/YbN, CeN/YbN and Eu/Eu＊ ratios and REE abundances among the samples suggest behaviors that are related to mantle and crustal sources.     

Secondary geochemical dispersion in the Precambrian auriferous Hutti-Maski schist belt, Raichur district, Karnataka, India. Part I: anomalies of As, Sb, Hg and Bi in soil and groundwater

The nature of secondary geochemical dispersion of As, Sb, Hg and Bi in soil and ground water of the semi-arid, tropical, Archaean, auriferous, Hutti-Maski greenstone belt has been investigated for identification of appropriate geochemical techniques for Au exploration in similar terrains.Results indicate that the <180 μm size-fraction of C-horizon soil is an appropriate sampling medium for delineating pedogeochemical anomalies of As, Sb, Hg and Bi related to gold mineralisation. These pedogeochemical anomalies along with anomalous values of alkalinity, chloride, sulphate, As and Sb in groundwater are controlled significantly by primary mineralisation located along shear zones in the greenstone belt. Arsenic anomalies in soil are broad, whereas, those of Sb and Bi are restricted to narrow zones directly over mineralised areas. In contrast, Hg anomalies around known mineralised areas are irregular and do not clearly demarcate the mineralised areas. The study indicates that anomalies of As, Sb and Hg in soil are principally hydromorphic, whereas those of Bi are clastic.The study recommends use of groundwater sampling at 2–3 km spacing with routine analysis of chloride, sulphate and alkalinity along with As and Sb in the first phase. This may be followed up with sampling of C-horizon of soils on a 1 km square grid for As-anomalies. Arsenic-anomalous areas may be sampled for As, Sb, Hg and Bi on a 500 m square grid for detailed exploration.