A comparison of methods of strain determination in rocks from southwest Dyfed (Pembrokeshire) and adjacent areas

A variety of methods devised in the last twelve years for measuring two-dimensional strain ratios have been applied to the same deformed oolitic limestone from southwest Dyfed. Their relative merits are discussed. A graphical method for studying relative locations of marker objects is described and its application to a variety of rocks illustrated. It is shown to have theoretical and practical advantages, while giving values of two-dimensional strain ratios comparable with those of other methods.     

Development and verification of the comprehensive model for physical properties of hydrate sediment

Natural gas hydrate is widely distributed all over the world and may be a potential resource in the near future, whereas hydrate dissociation during the development affects wellbore stability and drilling safety. However, the present modeling of hydrate reservoir parameters ignored the influence of effective stress and only considered the hydrate saturation. In this paper, a series of stress sensitivity experiments for the unconsolidated sandstone were carried out, and the influence of mean effective stress on physical parameters was obtained; a comprehensive model for the physical parameters of hydrate reservoir was developed subsequently. With the help of ABAQUS finite element software, the established comprehensive model was verified by the use of the wellbore stability numerical model of hydrate reservoir. The verification results show that ignoring the effect of mean effective stress on the parameters of hydrate formation aggravates the invasion of drilling fluid into the hydrate formation. Besides, ignoring the stress sensitivity of reservoir physical parameters will underestimate the wellbore instability during hydrate drilling, which will be a threat to the safety of gas hydrate drilling. At the end of the drilling operation, the maximum plastic strain of the model for considering and not considering stress sensitivity was 0.0145 and 0.0138, respectively. Therefore, the established comprehensive model will provide a theoretical support for accurately predicting the engineering geological disasters in hydrate development process.     

The assemblage quartz — Sillimanite — Garnet — Cordierite as an indicator of metamorphic conditions in the Daly Bay Complex,N.W.T.

If cordierite is treated as an anhydrous mineral, the composition of garnet and cordierite, coexisting with quartz and silliminate, depends on total pressure and temperature. Phase relations may be deduced by combining some available experimental work with several approximations. Assuming ideal ionic solution in garnet and cordierite, analyses of coexisting garnet and cordierite permit the determination of total pressure and temperature. Five rocks from the Daly Bay Complex, N. W. T., collected from locations up to 35 miles apart, indicate a range of 610–760 and 5.3–6.6 kb.     

Atmospheric Correction Over Coastal Turbid Waters of Bay of Bengal Using OCEANSAT-I Ocean Colour Monitor (OCM) Data

Space-borne ocean-colour remote sensor-detected radiance is heavily contaminated by solar radiation backscattered by the atmospheric air molecules and aerosols. Hence, the first step in ocean-colour data processing is the removal of this atmospheric contribution from the sensor-detected radiance to enable detection of optically active oceanic constituents e.g. chlorophyll-a, suspended sediment etc. In standard atmospheric correction procedure for OCEANSAT-1 Ocean Colour Monitor (OCM) data, NIR bands centered at 765 and 865 nm wavelengths were used for aerosol characterization. Due to high absorption by water molecules, ocean surface in these two wavelengths acts as dark background, therefore, sensor detected radiance can be assumed to have major contribution from atmospheric scattering. For coastal turbid waters this assumption of dark surface fails due to the presence of highly scattering sediments which causes sufficient water-leaving radiance in NIR bands and lead to over-estimation of aerosol radiance resulting in negative water leaving radiance for λ < 700 nm. In the present study, for the turbid coastal waters in the northern Bay of Bengal, the concept of spatial homogeneity of aerosol and water leaving reflectance has been applied to perform atmospheric correction of OCAEANSAT-1 OCM data. The results of the turbid water atmospheric correction have also been validated using in-situ measured water-leaving radiance. Comparison of satellite derived water-leaving radiance for five coastal stations with in-situ measured radiance spectra, indicates an improvement over the standard atmospheric correction algorithm giving physically realistic and positive values. Root Mean Square Error (RMSE) between the in-situ measured and satellite derived water leaving radiance for wavelengths 412 nm, 443 nm, 490 nm, 512 nm and 555 nm was found to be 1.11, 0.718, 0.575, 0.611 and 0.651%, respectively, using standard atmospheric correction procedure. By the use of spatial homogeneity concept, this error was reduced to 0.125, 0.173, 0.176, 0.225, and 0.290 and the correlation coefficient arrived at 0.945, which is an improvement over the standard atmospheric correction procedure.     

Effect of major ion variations in the marine environment on the specific gravity-conductivity-chlorinity-salinity relationship

Partial equivalent conductances and partial equivalent volumes of the major constituents in seawater were used to evaluate the specific gravity-conductivity-chlorinity-salinity relationships in the marine environment. For example, in the open ocean, the relationships between Cl‰ and both S‰ and specific gravity are valid to within 0.014‰ and 0.014 σ_t, respectively. The relationships between conductivity and S‰ and specific gravity are valid to within 0.006‰ and 0.007 σ_t. In river diluted nearshore areas specific gravity anomalies inferred from Cl‰, can be as great as 0.06 σ_t and 0.04 σ_t when inferred from a conductivity ratio measurement.     

Evaporative weathering of petroleum residues: The age of pelagic tar

The rate of evaporative weathering of a component of crude oil residue is assumed to be proportional to its equilibrium vapor pressure and to the amount remaining in the sample. This model is tested using literature data on normal paraffin profiles of crude oil weathered artificially and gas chromatographic data on crude oil residues weathered on rocky shores. Semiquantitative agreement over the time range from 1 to 400 days is demonstrated. Application of the model to gas chromatograms of pelagic tar lumps collected at Station S near Bermuda in 1972 implies that most of these lumps were formed by fragmentation of much larger and older masses, some within less than one day of the time they were collected. The weathering of pelagic tar thus involves a great deal more physical fragmentation than was previously supposed.     

Deep tow studies of the Tamayo transform fault

The Tamayo transform fault occurs at the north end of the East Pacific Rise where it enters the Gulf of California. The two deep-tow surveys reported here show that the transform fault zone changes significantly as a function of distance from the spreading center intersections. At site 1, near the intersection, one side of the fault is young and the fault zone is narrow and well-defined. Strike slip occurs in a zone approximately 1-km wide suggesting a correspondingly narrow zone of decoupling between the Pacific and North American plates. On the young side of the strike-slip zone, normal faults occur along shear zones which are 45°–50° oblique to the transform strike. They occur parallel to the short axis of the strain ellipse for transform fault strain here, i.e., perpendicular to the least compressive stress. The transform walls are formed by normal faulting as has been pointed out in previous detailed surveys. Here, however, the age contrast of 2.5 m.y. across the transform valley is apparent in the morphology of the normal fault scarps. While the scarps are steep and well-defined on the young side, the scarps on the older side have gradual 10°–30° slopes and appear to be primarily talus ramps. Apparently, the scarps have been tectonically eroded by continued strike slip activity after the initial stages of normal faulting. Thus, transform valleys should be quite asymmetric in cross-section where there is a significant age contrast and one side is less than approximately 0.5 m.y. old. Also, along older sections of the transform valley walls, normal faulting may not be at all obvious due to degradation of the scarps by tectonic erosion. This phenomenon makes the likelihood of transform faults providing windows into the oceanic crust most unlikely except in special cases.The picture of transform deformation is more complex at site 2 in the central portion of the fault where both sides of the fault are greater than 1 m.y. old. Here the transform valley is wider (25–30 km as opposed to 2–5 km). There is no clear simple zone of strike slip tectonics. In fact, the only clear evidence for deformation is the intrusion of magmatic or serpentinite diapirs through the sediments of the transform valley floor. The diapirs have deformed the turbidite layers flooring the valley and in one carefully studied case the turbidite sequence has been uplifted, perched atop the diapir. The pattern of deformation on this outcropping diapir shows radial and concentric fractures which can be modeled by a vertical intrusion circular in plan view. Magnetic studies limit the possible composition to basalt or serpentinite. A 60-km-long median ridge is also likely to be the product of intrusion along the transform fault. The survey at site 2 pointed out the importance of vertical tectonics in the transform valley floor and in particular the importance of diapiric intrusions of either basaltic or serpentinite composition.Based on initial boundary conditions and present tectonic elements in the Tamayo fault zone, a possible history of the mouth of the Gulf of California is outlined. The median ridge was emplaced starting approximately 0.8 m.y. ago by regional extension across the transform fault, the result of leaky transform faulting. The diapirs occur along a possible relay zone of extension midway along the fault which began approximately 0.15 m.y. ago. The extension in this case is parallel to the trend of the transform fault, is still occurring at present, and may evolve into a true spreading center.Contribution of the Scripps Institution of Oceanography, new series.     

Preservation of enzymic activity in marine plankton by low-temperature freezing

The measurement of enzymic activity in plankton communities is useful in the study of marine ecosystems. Such measurements can lead to a clearer understanding of the biological transformations in plankton communities at a particular time. However, the assays are somewhat time-consuming. To facilitate analysis of large numbers of samples, we have developed a method of quick-freezing of whole cells and of cell-free extracts of the diatom, Skeletonema costatum, followed by storage at ?60°C for up to one week. No loss in either the electron transport system (ETS) or the glutamate dehydrogenase (GDH) activity occurs. Similar conditions of storage can be used for the preservation of ETS activity in the marine copepod Calanus pacificus. Also, no measurable loss in either the GDH or the ETS activity is detectable after the quick-frozen whole cells of S. costatum have been kept frozen for over a year.     

Uptake of plutonium from seawater and sediment by a marine polychaete worm

The results of the uptake of plutonium 239 from sediment by a marine polychaete wormNereis diversicolor is reported in the present paper. A comparison is made of the relative importance of two possible uptake pathways, sediment and seawater by which this worm may obtain its plutonium body-burden. Under the laboratory conditions used for the comparison of those two routes it would appear thatNereis obtains greater than 98% of its body activity from seawater.