Distribution analysis of salt affected soils under canal and non-canal command area in a part of Etah district,U. P., using remote sensing technique

A World Bank-aided project on sodic land reclamation in Uttar Pradesh is being executed by U.P. Bhumi Sudhar Nigam, Lucknow, and Remote Sensing Applications Centre, U.P., Lucknow has the responsibility of sodic land mapping for the execution of land reclamation programme at the cadastral level. Sodic lands are mainly concentrated in the Gangetic alluvial plains but the problem of sodicity is particularly acute in the canal-irrigated areas. A study of the distribution pattern of sodic lands in canal and noncanal command areas in a reclamation site (covering 60 villages out of which sodic lands were mapped in 51 villages) of Etah district in Uttar Pradesh, indicates that 18.39 per cent area of the canal command villages was barren sodic which was 13.41 per cent of the total geographical area of the site (15417 ha), however, 11.69 per cent area was recorded to be barren sodic in the non-canal command villages which was only 3.16 per cent of the geographical area of the site. The results of soil chemical analysis indicate that barren sodic lands of canal command area are saline-sodic with higher concentration of soluble salts (pH₂ >8.5, EC₂ >4 dSm⁻¹), however, those of non-canal command area are sodic (pH₂ >8.5, EC₂ <4 dSm⁻¹). The post-monsoon ground level in the canal-irrigated areas was in the critical and semicritical zone (< 3.0 mbgl) whereas it was well below the semi-critical zone in the non-canal command area, which indicates that the high ground water level is a major factor to higher the area under sodicity.     

Urban cadastral mapping using very high resolution remote sensing data

With growing urban expanses, one of the pre-requisites for effective governance is Urban Information Systems (UIS) with content down to individual properties (and individuals). The basic input i.e., a map, in UIS should show individual property boundaries showing the plan outline of all structures existing within, at a scale of 1:1000 and larger with sub-metre to centimeters planimetric and geometric accuracy. With very high resolution remote sensing data of the order of 1m available in hand, it is possible to prepare maps with high resolution spatial content. The present exercise demonstrates a method of preparing a geometrically and planimetrically accurate urban cadastral map on very large scale for a small area of about 5 sq km. IKONOS merged data with 1m resolution is used for the purpose. Mapping was done in conjunction with on-site measurements and sketches. Guides are used to maintain shape symmetry and accuracy of buildings and other features. Working out cost of mapping per unit area is another objective in the present exercise. For want of fully or semi-automatic methods of information extraction from very high resolution remote sensing data, it is imperative that mapping should be carried out in conjunction with some on-site measurements wherever necessary.     

The use of MODIS data to derive acreage estimations for larger fields: A case study in the south-western Rostov region of Russia

Recent developments in remote sensing technology, in particular improved spatial and temporal resolution, open new possibilities for estimating crop acreage over larger areas. Remotely sensed data allow in some cases the estimation of crop acreage statistics independently of sub-national survey statistics, which are sometimes biased and incomplete. This work focuses on the use of MODIS data acquired in 2001/2002 over the Rostov Oblast in Russia, by the Azov Sea. The region is characterised by large agricultural fields of around 75 ha on average. This paper presents a methodology to estimate crop acreage using the MODIS 16-day composite NDVI product. Particular emphasis is placed on a good quality crop mask and a good quality validation dataset. In order to have a second dataset which can be used for cross-checking the MODIS classification a Landsat ETM time series for four different dates in the season of 2002 was acquired and classified. We attempted to distinguish five different crop types and achieved satisfactory and good results for winter crops. Three hundred and sixty fields were identified to be suitable for the training and validation of the MODIS classification using a maximum likelihood classification. A novel method based on a pure pixel field sampling is introduced. This novel method is compared with the traditional hard classification of mixed pixels and was found to be superior.     

A data-driven approach to local gravity field modelling using spherical radial basis functions

We propose a methodology for local gravity field modelling from gravity data using spherical radial basis functions. The methodology comprises two steps: in step 1, gravity data (gravity anomalies and/or gravity disturbances) are used to estimate the disturbing potential using least-squares techniques. The latter is represented as a linear combination of spherical radial basis functions (SRBFs). A data-adaptive strategy is used to select the optimal number, location, and depths of the SRBFs using generalized cross validation. Variance component estimation is used to determine the optimal regularization parameter and to properly weight the different data sets. In the second step, the gravimetric height anomalies are combined with observed differences between global positioning system (GPS) ellipsoidal heights and normal heights. The data combination is written as the solution of a Cauchy boundary-value problem for the Laplace equation. This allows removal of the non-uniqueness of the problem of local gravity field modelling from terrestrial gravity data. At the same time, existing systematic distortions in the gravimetric and geometric height anomalies are also absorbed into the combination. The approach is used to compute a height reference surface for the Netherlands. The solution is compared with NLGEO2004, the official Dutch height reference surface, which has been computed using the same data but a Stokes-based approach with kernel modification and a geometric six-parameter “corrector surface” to fit the gravimetric solution to the GPS-levelling points. A direct comparison of both height reference surfaces shows an RMS difference of 0.6 cm; the maximum difference is 2.1 cm. A test at independent GPS-levelling control points, confirms that our solution is in no way inferior to NLGEO2004.     

On the Use of CloudSat and MODIS Data for Estimating Hurricane Intensity

This letter presents preliminary results concerning the use of new observations from the A-Train Constellation for testing a new technique of remotely sensing hurricane intensity from space based on modeling a hurricane as a balanced, convectively neutral vortex. The key observational requirements are simultaneous, accurate measurements of cloud-top height, cloudtop temperature, and cloud profiling information across the center of the storm, although there are ways to bypass the need for cloud-top temperature. In this letter, the Moderate Resolution Imaging Spectroradiometer onboard Aqua provides an estimation of the cloud-top temperature, and the near-simultaneous CloudSat observations provide the essential cloud-top height and cloud profiling information. Initial results indicate that the new technique is a promising method for estimating storm intensity when compared post facto to the best track database. Potential uncertainties and room for further refinement of the technique are discussed.     

Automated Target Detection and Discrimination Using Constrained Kurtosis Maximization

Exploiting hyperspectral imagery without prior information is a challenge. Under this circumstance, unsupervised target detection becomes an anomaly detection problem. We propose an effective algorithm for target detection and discrimination based on the normalized fourth central moment named kurtosis, which can measure the flatness of a distribution. Small targets in hyperspectral imagery contribute to the tail of a distribution, thus making it heavier. The Gaussian distribution is completely determined by the first two order statistics and has zero kurtosis. Consequently, kurtosis measures the deviation of a distribution from the background and is suitable for anomaly/target detection. When imposing appropriate inequality constraints on the kurtosis to be maximized, the resulting constrained kurtosis maximization (CKM) algorithm will be able to quickly detect small targets with several projections. Compared to the widely used unconstrained kurtosis maximization algorithm, i.e., fast independent component analysis, the CKM algorithm may detect small targets with fewer projections and yield a slightly higher detection rate.     

Open source, spatial analysis, and activity-travel behaviour research: capabilities of the aspace package

This paper reports on recent experience with the development of aspace, an Open Source (OS) library for the geographic visualization and analysis of activity-travel behaviour. The paper begins with an overview of recent progress with respect to the convergence of Open Source technology, spatial analysis, and travel behaviour research. The remainder of the paper focuses on aspace; a collection of functions that, when combined with data describing the geographical location of daily activities, can be used to visualize and describe spatial properties of individual and household activity spaces. These properties include: size, orientation, shape, and the geographical dispersion of activity locations contained within the activity space. Several planar geometries are used to transform measurable spatial properties into intuitive objects for visualizing spatial patterns of activity participation. Experiments are conducted, using data from the first wave of the 2003 Toronto Travel Activity Panel Survey, to demonstrate the potential application of aspace for basic and applied policy-based research into activity-travel behaviour. The toolkit is distributed as a downloadable ‘package’ from the Open Source R Project for Statistical Computing.      

A Microwave Tomographic Approach for Nondestructive Testing of Dielectric Coated Metallic Surfaces

A microwave imaging method for nondestructive testing of perfectly conducting surfaces beyond a layered media is presented. The method is an adaptation of the surface reconstruction approach by Yapar et al. to the present problem. It is based on the analytical continuation of the measured data to the surface under test through a special representation of the scattered field in terms of Fourier transform and Taylor expansion. Then the problem is reduced to the solution of a nonlinear equation which is solved iteratively via the Newton method and regularization in the least squares sense. Numerical simulations show that defects as small as lambda/500 can be recovered through the presented algorithm.     

贝加尔裂谷系及邻区断裂现今活动变化及成因(英文)

已有的地质和地球物理方法无法对年、月、旬等现今时间尺度上的断层活动变化进行有效预测。运用基于地震活动定量指数运算程序的地理信息技术可以解决这个问题。这种方法被应用于贝加尔裂谷系(BRS)及邻区的研究当中。研究发现,断层活动变化发生在以几年为周期的时间尺度上,这无法用区域应力场的变化进行合理解释。沿着穿越贝加尔裂谷系的剖面编制了活动断层图以及地震活动定量指数曲线。提出的这种方法可以根据地震活动定量指数对活动断层进行仔细的分类,从而为解决地震中期预报相关问题开辟了重要途径。这种方法还被用来研究断层现今活动的时空变化和形成机制。研究发现,在实时尺度上断层活动具有高频发生的特征,这种现象可能是由于脆性岩石圈板内和块体内部运动产生的慢变形波的干扰导致的。利用变形波的通过速度可以对活动断层进行分组,各组具有不同的地质和地球物理特征参数,同时还可以对变形波波前的方向以及某一区域内主要断层在实时间隔内(地质上的瞬间)的活动情况进行预测。