An evaluation of the relationship between physical/mechanical properties and mineralogy of landscape rocks as determined by hyperspectral reflectance

We investigated the relationships between mineral content and the physical and mechanical properties of landscape rock using a non-destructive remote sensing method applied in the laboratory. Using this technique, the spectral properties of the landscape rock could be collected at different wavelengths without harming the samples. Differences in spectral reflectance were compared with the physical and mechanical properties of the stone. Significant correlations were observed between reflectance values and the rocks’ mechanical and physical properties, with correlation coefficients of 95 to 99 %. However, establishing a correlation between two variables is not a sufficient condition to establish a causal relationship. Mineral densities and mineral content are characteristics used for the classification of landscape rock. We have concluded that although spectral signatures from landscape rock can be used for predicting which stones might have similar features when comparing two batches of stone, the high correlations we discovered cannot confirm a cause and effect relationship that would allow for the prediction of a rock’s physical and mechanical properties. Although this conclusion is disappointing, the mineral content and the significant correlations discovered by hyperspectral reflectance scanning can be used as supplementary information when comparing two samples of landscape rock.     

An integration-based estimation approach for the determination of slug test parameters under various flow geometries

A simple parameter estimation procedure, designated as integration-based estimation (IBE), was introduced to determine the hydraulic properties of an aquifer using slug test models subjected to certain flow geometries such as radial and spherical flows. The basic idea behind the proposed IBE approach is to link an integration value at pre-defined normalized head levels for field data with that of a theoretical type curve. The IBE method removes the need for the implementation of the classical graphical matching process which would be ineffective to acquire aquifer parameters for non-ideal aquifer conditions. As the second aspect of this study, a new decision tool was suggested to determine the suitable slug test model to be utilized for the site data since diagnosing the flow character properly is of crucial importance for following a convenient analysis procedure. The estimation performance and limitation of the proposed IBE method were tested for several slug test scenarios including radial and spherical flow models with a number of synthetically generated data sets as well as a field application. Results reveal that the IBE together with the identification methodology not only is able to retrieve aquifer parameters as reliable as the existing techniques in the literature but also diagnoses the flow character precisely as demonstrated in this study.     

Did satellite imagery supersede aerial imagery? A perspective from 3D geopositioning accuracy

In this study, the geometric accuracy comparison of aerial photos and WorldView-2 satellite stereo image data is evaluated with the different number and the distribution of the ground control points (GCPs) on the basis of large scale map production. Also, the current situation of rivalry between airborne and satelliteborne imagery was mentioned. The geometric accuracy of Microsoft UltraCam X 45 cm ground sampling distance (GSD) aerial imagery and WorldView-2 data both with and without GCPs are also separately analyzed. The aerial photos without any GCP by only using global navigation satellite system (GNSS) and inertial measurement unit (IMU) data with tie points give an accuracy of ±1.17 m in planimetry and ±0.71 m in vertical that means nearly two times better accuracy than the rational polynomial coefficient (RPC) of stereo WorldView-2. Using one GCP affects the accuracies of aerial photos and WorldView-2 in different ways. While this situation distorts the aerial photo block, it corrects the shift effect of RPC in WorldView-2 and increases the accuracy. By using four or more GCPs, ½?pixel (～0.23 m) accuracy in aerial photos and 1 pixel (～0.50 m) accuracy in WorldView-2 can be achieved in horizontal. In vertical, aerial photos have 1 pixel (～0.55 m) and WorldView-2 has 1.5 pixels (～0.85 m) accuracy. These results show that Worldview-2 imagery can be used in the production of class I 1:5000 scale maps according to the ASPRS Accuracy Standards for Digital Geospatial Data in terms of geometric accuracy. It is concluded that the rivalry between aerial and satellite imagery will continue for some time in the future.     

Thermal effects on the growth and fatty acid composition of four harmful algal bloom species: Possible implications for ichthyotoxicity

Little is known regarding how harmful algal bloom species respond to different temperatures in terms of fatty acid production. This study examined the effects of temperature on the growth rates, cell volumes, and fatty acid concentrations and compositions of four harmful algal bloom species (HABs), Akashiwo sanguinea, Alexandrium tamarense, Chattonella ovata, and Prorocentrum minimum. The HABs species were cultured at 15, 20, 25, and 30°C in a nutrient-enriched medium. Three of the species maintained optimal growth rates over a wide range of temperatures, but A. tamarense did not. The cell volumes of each species showed little change over the temperature range. The total fatty acid concentrations in A. sanguinea, A. tamarense and C. ovata decreased as the temperature increased, but P. minimum showed no trend in this respect. Polyunsaturated fatty acids (PUFAs), the key biochemical components that maintain cell membrane fluidity and which are associated with toxicity, decreased in both concentration and proportion of total fatty acids as temperature increased, except in A. sanguinea, in which the proportion of PUFAs to the total fatty acids increased. These reductions in PUFA concentration and proportion could reduce cell membrane fluidity and toxicity in HABs; however, enhanced growth and/or ruptured cells, which are considered more toxic than intact cells, could compensate for the reduced per-cell toxicity. This phenomenon might impact on the marine ecosystem and aquaculture industry.     

Soil wettability in ground engineering: fundamentals,methods, and applications

Wettability is a fundamental property controlling the extent of wetting in flat and granular solids. In natural soils, wettability affects a wide variety of processes including infiltration, preferential flow and surface runoff. In mineral processing, wettability is paramount in enhancing the efficiency of separation of minerals from gangue. The manipulation of surface wettability is equally crucial in many industrial applications. For instance, superhydrophobic surfaces are those on which water drops roll off easily and as such are used for self-cleaning applications. Therefore, while wettability is strongly cross-disciplinary, its evolution has been discipline-specific with a direct extrapolation or transfer of concepts, approaches, and methods to ground engineering unlikely to remain valid. This paper synthesizes relevant aspects from surface chemistry, materials science, mining engineering, and soil science, and discusses their implications within the context of new granular materials that resist wetting, for use in barriers or ground improvement and, in unsaturated soils, where the effects of wettability have been documented.     

Geochemistry of Çoruh River Bed Sediments in NE Turkey: Implications in Weathering-Sedimentary Cycle,Provenance, and Metal Pollution

This study defines the source area, sub-aerial weathering, and sedimentary cycle level, as well as heavy metal content and origin, of the Çoruh River bed sediments. The studied sediments are geochemically classified as litharenite based on the ratio of the major element contents. Relative to the Upper Continental Crust (UCC), trace elements Rb, Sr, Ba, Th, U, Zr, Hf, Y, Nb, and Pb are generally depleted; Co, Ni, Cu, Sc, and V are generally enriched; and Au is depleted in some places and enriched in other places. The rare earth element (REE) distributions of the samples exhibit a trend similar to that of the upper continental crust (UCC); however, low to moderate depletion occurs in the bed sediments in UCC. The analyzed samples exhibit low Chemical Index of Alteration (CIA) values, Plagioclase Index of Alteration (PIA) values (<50), CIA/WIP (Weathering Index ratios <1), and substantially high Index of Compositional Variability values (ICV) (>1). Thus, the samples are not chemically mature and are mainly derived from non-altered sources and were exposed the simple cycling history. REEs are depleted in the river bed sediments, unlike the world river average silt, world river average clay, and suspended sediment in world rivers. Minor enrichment of Zn, Sn, and Sc contents, low-to-moderate enrichment of Cu content, very severe enrichment of as content, and extremely severe enrichment of Ni content of the analyzed samples are observed. Consequently, stream bed sediments are derived from intermediate sources close to mid-continental crust rather than felsic sources Low-to-moderate degrees of chemical weathering of these sediments indicate increased tectonic activity, increased erosion, and rapid sedimentation in semiarid to arid conditions in the source regions over time. Thus, the sediments are chemically immature. These sediments are exposed to lithogenic and anthropogenic contamination.     

Petrogenesis of plio-quaternary intra-plate continental alkaline lavas from the İskenderun Gulf (Southern Turkey): Evidence for metasomatized lithospheric mantle

The Quaternary alkaline volcanic field of Southern Turkey is characterized by intra-continental plate-type magmatic products, exposed to the north of the ?skenderun Gulf along a NE-SW trending East Anatolian Fault, to the west of its intersection with the N–S trending Dead Sea Fault zone. The ?skenderun Gulf alkaline rocks are mostly silica-undersaturated with normative nepheline and olivine and are mostly classified as basanites and alkaline basalts with their low-silica contents ranging between 43 and 48?wt.% SiO₂. They display Ocean Island Basalt (OIB)–type trace element patterns characterized by enrichments in large-ion-lithophile elements (LILE) and light rare earth element (LREE), and have (La/Yb)_N?=?8.8–17.7 and (Hf/Sm)_N?=?0.9–1.6 similar to those of basaltic rocks found in intraplate suites. The basanitic rocks have limited variations Sr-Nd isotopic ratios (⁸⁷Sr/⁸⁶Sr?=?0.70307–0.70324, ¹⁴³Nd/¹⁴⁴Nd?=?0.512918–0.521947), whereas the alkali basalts display more evolved Sr-Nd isotopic ratios (⁸⁷Sr/⁸⁶Sr?=?0.70346-0.70365, ¹⁴³Nd/¹⁴⁴Nd?=?0.512887–0.521896). The ?skenderun Gulf alkaline rocks also display limited Pb isotopic variations with ²⁰⁶Pb/²⁰⁴Pb?=?18.75–19.09 ²⁰⁷Pb/²⁰⁴Pb?=?15.61–15.66 and²⁰⁸Pb/²⁰⁴Pb?=?38.65–39.02, indicating that they originated from an enriched lithospheric mantle source. Calculated fractionation vectors indicate that clinopyroxene and olivine are the main fractionating mineral phases. Similarly, based on Sr-Nd isotopic ratios, the assimilation and fractional crystallization (AFC) modeling shows that the alkali basalts were affected by AFC processes (r?=?0.2) and were slightly contaminated by the upper crustal material.The high TiO₂ contents, enrichments in Ba and Nb, and depletions in Rb can likely be explained by the existence of amphibole in the mantle source, which might, in turn, indicate that the source mantle has been affected by metasomatic processes. The modeling based on relative abundances of trace elements suggests involvement of amphibole-bearing peridotite as the source material. ?skenderun Gulf alkaline rocks can thus be interpreted as the products of variable extent of mixing between melts from both amphibole-bearing peridotite and dry peridotite.     

A new approach to minimize the loss of life after natural hazards by using Android operating system

Nowadays, the usage rates of smartphones are increasing rapidly. With the versatility of its features, smartphones have succeeded in attracting users. Performing this study has also affected the usage rate of smartphones every day. It is possible to determine the position with GPS (Global Positioning System) technology which is located in smartphones. In this study, smartphone location notification was used to detect the locations of the people who were under debris after the earthquake by means of the phones on them. People who cannot be reached for any reason will be immediately identified, and emergency interventions will be possible. Thus, the survival rate of the injured will be high with early intervention. In this study, it was aimed to minimize the loss of life after the earthquake and all the negativities that would be experienced in society due to this loss. The developed application has been tested in the external world, and the obtained data are given in results section.

     

Image-aided platform orientation determination with a GNSS/low-cost IMU system using robust-adaptive Kalman filter

The availability of miniaturized sensors with enhanced capabilities, new methods for image processing, and easy access to small and low-weight airborne platforms for data acquisition, including unmanned vehicles, opens new possibilities for geodetic navigation applications and developing new developments in sensor fusion. In this context, the development of efficient methods, based on low-cost sensors, to extract precise georeferenced information from digital cameras is of utmost interest. We present a method to improve the performance of the integration of GNSS/low-cost IMU by exploiting the orientation changes retrieved from digital images. In this work, a robust-adaptive Kalman filter is also introduced to further improve the performance of the method deployed. The adaptive factor and the robust factor accomplished are determined by innovation information and the threshold value of orientation changes between consecutive images. Results from airborne tests used to assess the performance of the method are presented. The results show that using a non-metric camera, the Euler angle estimation accuracy of the GNSS/low-cost IMU integration can be improved to be close to 0.5 degree and an additional improvement, which can reach 59%, can be achieved after using the robust-adaptive Kalman filter.     

The investigation of flood risk perception as a quantitative analysis from socio-demographic perspective

The priority of flood management planning is physical victimization and focuses on taking structural measures. Although this approach is an accurate approach, more information is needed in implementing efficient precautionary and planning decisions. It is an indisputable fact that the existence of nothing that is not sustainable in nature cannot continue. Hence, it is necessary to implement a planning decision suitable for the structure of the population living in the region so that the continuity of the policies to be carried out against natural hazards of hydrometeorological origin such as a flood is ensured. How the socio-demographic structures affect the flood risk perception of 245 people living in the city center of Bayburt is examined in this study. It is the first research conducted for the province of Bayburt for this perspective. The participants were asked to fill a questionnaire containing 24 items and consisting of 2 sections. T test and one-way ANOVA (one-way analysis of variance) statistical methods were used to ascertain the difference between the responses of the participants to the questionnaire, based on their demographic structure. As the result of the study, significant differences were observed between the expressions depicting flood risk perception and the participant's age, income levels and educational background. In addition, it has been noted that there is a positive relationship between education and income levels and flood risk perception.